Application of Fe3o4@C Catalyzing Heterogeneous Uv-Fenton System for Tetracycline Removal With a Focus on Optimization by a Response Surface Method Publisher



Kakavandi B^{1, 2} ; Takdastan A^{1, 2} ; Jaafarzadeh N^{1, 2} ; Azizi M² ; Mirzaei A² ; Azari A³ Show Affiliations
Source: Journal of Photochemistry and Photobiology A: Chemistry Published:2016

Abstract

Herein, we synthesized a heterogeneous catalyst incorporating magnetite nanoparticles (Fe3O4, with an average size of 80 nm) supported on powder activated carbon (Fe3O4@C) as a highly active, easily separable and recyclable catalyst for the degradation of tetracycline (TC) antibiotic in aqueous solution in UV-Fenton conditions. The influences of reaction time, TC, catalyst and H2O2 concentration at pH 3 ± 0.2 on TC degradation efficiency were all evaluated in detail using a response surface method (RSM). The degradation kinetics and mineralization as well as durability and reactivity of the catalyst were also investigated. Recycling tests were performed in order to evaluate the stability of the catalyst during successive UV-Fenton reactions and the possibility of its use in a batch system. Analysis of variance (ANOVA) showed that the quadratic model fitted best to the experimental data with the correlation coefficients of 0.9669, 0.9933 and 0.984 for R2, adjusted-R2, predicted-R2, respectively. Results from the studies relating to the characteristics and performance of Fe3O4@C showed that high adsorption capacity led to a sharp enhancement in the catalytic activity. Under the optimized conditions, the removal efficiency of TC was determined to be 79% within 44 min reaction. The degradation process followed the pseudo-first-order kinetic model with a good correlation coefficient. The removal efficiency of total organic carbon (TOC) reached 43.7% within 120 min. It was observed that Fe3O4@C retained its stability and activity even after several cycles, which could significantly reduce the operation cost in practical applications. © 2015 Elsevier B.V.