Isfahan University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Share this content! On (X network) By
Effect of Ceramic Cooling Protocols and Zirconia Coloring on Fracture Load of Zirconia Based Restorations Publisher



Ebadian B1 ; Mosharraf R2 ; Abbasi M3
Authors
Show Affiliations
Authors Affiliations
  1. 1. Dental Implant Research Center, School of Dentistry, Isfahan University of Medical Science, Isfahan, Iran
  2. 2. Dental Material Research Center, School of Dentistry, Isfahan University of Medical Science, Isfahan, Iran
  3. 3. Department of Prosthodontics, School of Dentistry, Shahrekord University of Medical Science, Shahrekord, Iran

Source: Dental Research Journal Published:2018


Abstract

Background: Residual thermal stresses in dental porcelains can cause clinical failure. Porcelain cooling protocols may affect the amount of residual stresses within porcelain and also porcelain-zirconia bond strength. The objective of this study was to assess the effect of cooling protocols on the fracture load of porcelain veneered zirconia restorations. Materials and Methods: Forty zirconia bars (31 mm × 6.5 mm × 1.35 mm ± 0.1 mm) were fabricated by computer aided design and computer aided manufacturing technology. Half of the specimens were immersed in the coloring agent for 2 min before sintering (yellow group). Thus, the specimens were divided into two groups of white (W) and yellow (Y) samples (n = 20). Heat pressed ceramic was applied to all bars. After pressing, half of the samples in each group were immediately removed from the oven (fast cooling) while the other specimens remained in the partially open door (30%) oven until the temperature reached to 500°C. Samples were thermocycled for 5000 cycles and subjected to modified four point flexural strength test by a universal testing machine at a crosshead speed of 0.5 mm/min. Two way ANOVA, One way ANOVA followed by post hoc Tukey honest significant difference tests were used for data analysis (α = 0.05). Results: Fractures were cohesive in all samples (within the porcelain adjacent to the interface). Two way ANOVA showed that the effect of cooling protocol on the fracture load of samples was statistically significant (P < 0.001). In addition, the fracture load of W and Y groups was significantly different (P < 0.001). The white slow group showed the highest fracture load (179.88 ± 23.43 N). Conclusion: Slow cooling protocol should be preferably applied for zirconia restorations. Coloring agent used in this study had a significant negative effect on fracture load. © 2018 Dental Research Journal. Published by Wolters Kluwer - Medknow.
Related Docs
View other Related Docs
1. Influence of Surface Modification Techniques on Shear Bond Strength Between Different Zirconia Cores and Veneering Ceramics, Journal of Advanced Prosthodontics (2011)
2. Effect of Er:Yag Laser Application and Sandblasting on Shear Bond Strength of Veneering Ceramic to Zirconia Core, Frontiers in Dentistry (2024)
3. Clinical Outcomes of Zirconia-Based Implant- and Tooth-Supported Single Crowns, Clinical Oral Investigations (2016)
4. Shear Bond Strength of Colored and Sandblasted Zirconia to Ceramic Veneers Fabricated by the Pressing and Layering Techniques: An in Vitro Study, International Journal of Dentistry (2023)
5. Five Year Clinical Outcomes of Metal Ceramic and Zirconia-Based Implant-Supported Dental Prostheses: A Retrospective Study, Journal of Dentistry (2020)
6. Flexural Strengths of Implant-Supported Zirconia Based Bridges in Posterior Regions, Journal of Advanced Prosthodontics (2014)
7. Evaluation of the Bonding Shear Strength Between Enamel and Dentin Feldspathic Porcelain and Two Different Monolithic Zirconia With Low and High Translucency, International Journal of Dentistry (2024)
8. Effect of Adhesive Resin Type for Bonding to Zirconia Using Two Surface Pretreatments, Journal of Adhesive Dentistry (2015)
Experts (# of related papers)
View all Related Experts
Omid Savabi (13)
Farahnaz Nejatidanesh (10)
Other Related Docs
9. Comparison of Shear Strength of Metal and Ceramic Orthodontic Brackets Cemented to Zirconia Depending on Surface Treatment: An in Vitro Study, European Journal of Dentistry (2019)
10. Effects of Number of Firings and Veneer Thickness on the Color and Translucency of 2 Different Zirconia-Based Ceramic Systems, Journal of Prosthetic Dentistry (2019)
11. The Effects of Cement Space Thickness and Material Type on Marginal Discrepancy of Restoration; [Efeitos Da Espessura Do Cimento E Do Tipo De Material Na Discrepancia Marginal Da Restauracao], Brazilian Dental Science (2021)
12. In Vitro Evaluation of the Effect of Different Luting Cements and Tooth Preparation Angle on the Microleakage of Zirconia Crowns, International Journal of Dentistry (2021)
13. Effect of Different Surface Treatment Methods on the Shear Bond Strength of Resin Composite/Zirconia for Intra-Oral Repair of Zirconia Restorations, European Journal of Dentistry (2023)
14. Comparative Assessment of Flexural Strength of Monolithic Zirconia With Different Thicknesses and Two Sintering Techniques, Clinical and Experimental Dental Research (2024)
15. Retention of Implant-Supported Zirconium Oxide Ceramic Restorations Using Different Luting Agents, Clinical Oral Implants Research (2013)
16. Comparative Evaluation of Microtensile Bond Strength of Four Glass-Containing Materials With Primary Teeth Dentin, Iranian Journal of Pediatrics (2019)
17. Effect of Material Type and Cement Space Thickness on Marginal Discrepancy of Restoration Using a Micro-Ct Scanner, Pesquisa Brasileira em Odontopediatria e Clinica Integrada (2019)
18. Marginal Gap, Internal Fit, and Fracture Load of Leucite-Reinforced Ceramic Inlays Fabricated by Cerec Inlab and Hot-Pressed Techniques, Journal of Prosthodontics (2011)
19. Comparison of Shear Bond Strength and Enamel Surface Changing Between the Two-Step Etching and Primer and Self-Etch Primer Methods in Rebonding of Orthodontic Brackets: An in Vitro Study, Dental Research Journal (2019)
20. Effect of Different Cleansing Methods on the Artificially Aged Bond Strength of Resin to Contaminated Zirconia: A Systematic Review, Journal of Prosthodontics (2022)
21. The Influence of Rotating Fatigue on the Bond Strength of Zirconia-Composite Interfaces, Dental Materials (2010)
22. Effect of Phosphoric Acid Etching of Enamel Margins on the Microleakage of a Simplified All-In-One and a Self-Etch Adhesive System, Operative Dentistry (2009)
23. Resin Bonding Using Etch-And-Rinse and Self-Etch Adhesives to Decalcified Deciduous Enamel After Bioactive Glass Air Abrasion, The journal of contemporary dental practice (2014)
24. Influence of Enzymatic and Chemical Degradation on Zirconia Resin Bond Strength After Different Surface Treatments, American Journal of Dentistry (2010)
25. The Effect of Washing Water Temperature on Resin-Dentin Micro-Shear Bond Strength, Dental Research Journal (2016)
26. Effect of Prewarming And/Or Delayed Light Activation on Resin-Modified Glass Ionomer Bond Strength to Tooth Structures, Operative Dentistry (2012)
27. Porcelain Color Alteration After Orthodontic Bonding Using Three Different Surface Preparation Methods, Dental Research Journal (2018)
28. Bond Strength Evaluation of Ceramic Restorations With Immediate Dentin Sealing: A Systematic Review and Meta-Analysis, Journal of Dentistry (Iran) (2024)
29. Effect of Cleaning Methods on Retentive Values of Saliva-Contaminated Implant-Supported Zirconia Copings, Clinical Oral Implants Research (2018)
30. Shear Bond Strengths and Morphological Evaluation of Filled and Unfilled Adhesive Interfaces to Enamel and Dentine, International Journal of Dentistry (2012)
31. Fracture Toughness of Bleached Enamel: Effect of Applying Three Different Nanobiomaterials by Nanoindentation Test, Contemporary Clinical Dentistry (2016)
32. Adhesion to Zirconia: An Umbrella Review, International Journal of Adhesion and Adhesives (2023)
33. Evaluation of Flexural Strength of Denture-Based Materials Reinforced With Al2o3, Sio2, Tio2, and Zro2 Nanoparticles: A Systematic Review and Meta-Analysis, Gomal Journal of Medical Sciences (2023)
34. Flexural Strength of Interim Resin Materials for Fixed Prosthodontics, Journal of Prosthodontics (2009)
35. Comparison of Translucency and Opalescence Among Different Dental Monolithic Ceramics, Journal of Prosthetic Dentistry (2021)
36. Evaluating the Effect of High-Translucent Zirconia Thickness and Substrate Shade on the Final Color of the Restoration, Clinical and Experimental Dental Research (2025)
37. Effect of the Processing Cycle on Dimensional Changes of Heat-Polymerized Denture Base Resins, Dental Research Journal (2015)
38. Innovations in Bonding to Zirconia Based Ceramics: Part Iii. Phosphate Monomer Resin Cements, Dental Materials (2010)
39. Effects of Rinsing Water Temperature and Preheated Composites on Microleakage of Composite Restorations With Two Bonding Agents, Frontiers in Dentistry (2022)
40. Comparing the Color Match of Monolithic Cad-Cam Dental Ceramics With the Vita Classical Shade Guide, Journal of Prosthetic Dentistry (2024)
41. Five Year Clinical Outcomes and Survival of Chairside Cad/Cam Ceramic Laminate Veneers — a Retrospective Study, Journal of Prosthodontic Research (2018)
42. Relation of Cad/Cam Zirconia Dental Implant Abutments With Periodontal Health and Final Aesthetic Aspects; a Systematic Review, Journal of Clinical and Experimental Dentistry (2023)
43. Effect of Thermocycling and Water Storage on Bond Longevity of Two Self-Etch Adhesives, General Dentistry (2013)
44. Effect of Postbleaching Application of an Antioxidant on Enamel Bond Strength of Three Different Adhesives, Medicina Oral, Patologia Oral y Cirugia Bucal (2011)
45. The Effect of Different Methods of Cleansing Temporary Cement (With and Without Eugenol) on the Final Bond Strength of Implant-Supported Zirconia Copings After Final Cementation: An in Vitro Study, Dental Research Journal (2023)
46. Effect of Different Chemical Disinfectants on the Flexural Strength of Heat-Polymerized Acrylic Resins, The European journal of prosthodontics and restorative dentistry (2013)
47. Thermal Rise During Photopolymerization and Degree of Conversion of Bulk Fill and Conventional Resin Composites, Dental Research Journal (2020)
48. Effect of Trichloroacetic Acid Hydrogel on Self-Etch Adhesive Bond Strength to Dental Tissues, Journal of Contemporary Dental Practice (2013)
49. Effect of Multiple Firings on the Shear Bond Strength of Presintered Cobalt-Chromium Alloy and Veneering Ceramic, Journal of Prosthetic Dentistry (2021)
50. A New Solvent-Free One-Step Self-Etch Adhesive: Bond Strength to Tooth Structures, Journal of Contemporary Dental Practice (2013)