Isfahan University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Share this content! On (X network) By
An in Vitro Assessment of the Mechanical Characteristics of Nickel-Titanium Orthodontic Wires in Fluoride Solutions With Different Acidities Publisher



Alavi S1 ; Barooti S1 ; Borzabadifarahani A2
Authors
Show Affiliations
Authors Affiliations
  1. 1. Dental Materials Research Center, Departments of Orthodontics, School of Dentistry, Isfahan University of Medical Sciences, Isfahan, Iran
  2. 2. Department of Orthodontics, Warwick Dentistry, Warwick Medical School, University of Warwick, Coventry, Nhs England, Locum Consultant Orthodontist

Source: Journal of Orthodontic Science Published:2015


Abstract

Objectives: The aim was to evaluate the in vitro effects of fluoride solutions with different acidities on load-deflection characteristics of nickel-titanium (NiTi) orthodontic wires. Materials and Methods: In this study, which lasted 30 days, 36 (3 cm long, 0.016 × 0.022 inches, SENT 1622, G & H wire Company, Greenwood, Indiana, USA) NiTi wires, were divided into three experimental groups of 12 each. Two groups were subjected to 0.05 topical fluoride mouthwash with different acidities (G1, pH 4; G2, pH 6.6) for 90 s, twice a day, and kept in normal saline after that. The third group (G3, the control group) was kept in normal saline only. Load and unload forces were measured with three bracket bending test in a universal testing machine (Testometric Co, Rochdale, UK). Loading and unloading plateaus and hysteresis were also recorded. Data were then analyzed using analysis of variance and honestly significant difference Tukey at P < 0.05. Results: During the loading phase, there was a significant difference between deflections (P < 0.001); but there was no interaction effect (P = 0.191) and no significant difference among three groups (P = 0.268). In the unloading phase, there was a significant difference between deflections (P < 0.001) and an interaction effect was also observed (P = 0.008). Further, significant differences noted among three groups (P = 0.037). Only in the unloading phase, at deflections of 2.2 through 0.2 mm, significant differences between the mean force values of the G1 and G3 groups were observed (P = 0.037). Conclusion: Based on this in-vitro study, compared to neutral fluoride solution, daily mouthwash with a fluoride solution with more acidic pH of 4 affected the NiTi wires load-deflection characteristics during the unloading phase. This finding may have clinical implications and can be further validated by in-vivo studies. © 2012 Wolters Kluwer Medknow Publications. All rights reserved.
Other Related Docs