Isfahan University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Share this content! On (X network) By
Effect of Post Heat Treatment on Surface Properties of Hydrogen Peroxide (H2o2) Treated Titanium Publisher



Mirdamadi SH1 ; Khodaei M2 ; Valanezhad A3 ; Watanabe I3 ; Nejatidanesh F1 ; Savabi O4
Authors
Show Affiliations
Authors Affiliations
  1. 1. Dental Materials Research Center, Dental Research Institute, School of Dentistry, Isfahan University of Medical Sciences, Isfahan, Iran
  2. 2. Materials Engineering Group, Golpayegan College of Engineering, Isfahan University of Technology, Golpayegan, 87717-67498, Iran
  3. 3. Department of Dental and Biomedical Materials Science, Nagasaki University, Nagasaki, Japan
  4. 4. Dental Research Center, Dental Research Institute, School of Dentistry, Isfahan University of Medical Sciences, Isfahan, Iran

Source: Journal of Materials Research and Technology Published:2022


Abstract

In this study different heat treatment temperatures have been applied for titanium implant after surface modification through chemical treatment by Hydrogen Peroxide (H2O2). X-ray diffraction (XRD) analysis revealed that the main phase at the surface of heat-treated sample at temperatures below than 650 °C is Anatase, moreover, the presence of Anatase, which is dominate along the Raman shift, with noticeable pick intensity is confirmed by Raman spectroscopy technique. Field emission scanning microscopy (FESEM) observation shows that by increasing temperature, the porous structures did not change significantly in terms of morphology. Contact Angle (CA) measurement and Ellipsometry are other techniques which are used to figure out hydrophobicity of the surface and optical properties of the oxide surface, respectively. © 2022 The Author(s)
Related Docs
View other Related Docs
1. The Effect of Different Oxidizing Ions on Hydrogen Peroxide Treatment of Titanium Dental Implant, Surface and Coatings Technology (2018)
2. Optimum Temperature and Chlorine Ion Concentration for Hydrogen Peroxide Treatment of Titanium Dental Implant Material, Journal of Materials Research and Technology (2020)
3. The Side Effects of Surface Modification of Porous Titanium Implant Using Hydrogen Peroxide: Mechanical Properties Aspects, Materials Letters (2016)
4. Surface and Mechanical Properties of Modified Porous Titanium Scaffold, Surface and Coatings Technology (2017)
5. Comparative Evaluation of the Effect of Different Types of Surface Modifiers on Bioactivity of Porous Titanium Implants, Russian Journal of Non-Ferrous Metals (2015)
6. Characterization and in Vitro Evaluation of Nanostructure Barium Titanate Coating on Ti6al4v, Journal of Ceramic Processing Research (2016)
7. Controlled Gentamicin- Strontium Release As a Dual Action Bone Agent: Combination of the Porous Titanium Scaffold and Biodegradable Polymers, Journal of Alloys and Compounds (2017)
8. The Effect of Vacuum Leak Rate on Sintering of Porous Titanium Scaffold, e-Journal of Surface Science and Nanotechnology (2019)
Experts (# of related papers)
View all Related Experts
Omid Savabi (6)
Jaber Yaghini (2)
Other Related Docs
9. Effect of Spacer Type and Cold Compaction Pressure on Structural and Mechanical Properties of Porous Titanium Scaffold, Powder Metallurgy (2015)
10. Synthesis and in Vitro Evaluation of Electrodeposited Barium Titanate Coating on Ti6al4v, Journal of Medical Signals and Sensors (2016)
11. Investigation of the Antibacterial Effect of Laser Irradiation and Chemical Agent on Human Oral Biofilms Contaminated Titanium Discs, Photodiagnosis and Photodynamic Therapy (2019)
12. Morphology-Dependent Immunomodulatory Coating of Hydroxyapatite/Peo for Magnesium-Based Bone Implants, ACS Applied Materials and Interfaces (2023)
13. Comparison of Antimicrobial Effect of Several Decontaminating Methods on Contaminatedtitanium Discs, Dental Research Journal (2022)
14. Surface Modification of Ti6al4 V Implants by Heat, H2o2 and Alkali Treatments, Surface Engineering (2016)
15. Porous Titanium Scaffold Coated Using Forsterite/Poly-3-Hydroxybutyrate Composite for Bone Tissue Engineering, Surface and Coatings Technology (2019)