Isfahan University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Share this content! On (X network) By
The Effect of Abutment Angulation and Crown Material Compositions on Stress Distribution in 3-Unit Fixed Implant-Supported Prostheses: A Finite Element Analysis Publisher



Mosharraf R1 ; Abbasi M2 ; Givehchian P3
Authors
Show Affiliations
Authors Affiliations
  1. 1. Dental Material Research Center, Department of Prosthodontics, School of Dentistry, Isfahan University of Medical Sciences, Isfahan, Iran
  2. 2. Department of Prosthodontics, School of Dentistry, Shahrekord University of Medical Sciences, Shahrekord, Iran
  3. 3. Dental Implants Research Center, Dental Research Institute, School of Dentistry, Isfahan University of Medical Sciences, Isfahan, Iran

Source: International Journal of Dentistry Published:2022


Abstract

Objective. The aim of this study was to evaluate influence of abutment angulation and restoration material compositions on the stress pattern in dental implants and their surrounding bone. Materials and Methods. In this finite element study, the six different solid 3D models of mandibular 3-unit fixed implant-supported prostheseswere analyzed. In all of these models, a straight abutment was used for anterior implants at the second premolar site, and in order to posterior implant at the second molar site, abutments with three different angles (straight, 15, and 20°) were used. Also, two different restoration material compositions (porcelain fused to base metal (PFBM) and porcelain fused to noble metal (PFNM)) were considered for fixed implant supported restorations. A 450 N static force was exerted in a straight manner along the longitudinal axis of the anterior implant in a tripod, and the stress distribution was measured based on the restoration materials and abutment angulations of the models in the 3 sites of cortical, cancellous bone, and fixtures. The simulation was performed with ABAQUS 6.13 Software. Results. In all models, stress values in surrounding cortical bone were more than in spongy bone. Maximum stress levels in an anterior abutment-implant complex were seen in models with angled implants. In models with parallel implants, the stress level of a molar straight abutment-implant complex was less than that of premolar straight ones. In an angled posterior abutment-implant complex, less stress level was detected compared to straight ones. In all PFNB models, stress values were slightly more and distributed in a wider area of premolar straight abutments. Conclusion. Increasing an abutment angle, increases stress in surrounding bone and straight implant-abutment combination. It seems that the crown material composition affects stress distribution of the implant-abutment combination but does not affect stress distribution of surrounding bone. © 2022 Ramin Mosharraf et al.
Related Docs
View other Related Docs
1. The Effect of Implant Angulation and Splinting on Stress Distribution in Implant Body and Supporting Bone: A Finite Element Analysis, European Journal of Dentistry (2015)
2. Stress Analysis of Different Prosthesis Materials in Implant-Supported Fixed Dental Prosthesis Using 3D Finite Element Method, Dental Hypotheses (2014)
3. Effect of Type of Luting Agents on Stress Distribution in the Bone Surrounding Implants Supporting a Three-Unit Fixed Dental Prosthesis: 3D Finite Element Analysis, Dental Research Journal (2015)
4. Flexural Strengths of Implant-Supported Zirconia Based Bridges in Posterior Regions, Journal of Advanced Prosthodontics (2014)
5. Stress Analysis of Endodontically Treated Tooth-Implant Different Connectors Designs in Maxillary Posterior Region: A Finite Element Analysis, European Journal of Dentistry (2024)
6. The Effect of Placement Depth of Platform-Switched Implants on Periimplant Cortical Bone Stress: A 3-Dimensional Finite Element Analysis, Implant Dentistry (2013)
7. Finite Element Analysis of the Influence of Implant Inclination on Stress Distribution in Mandibular Overdentures, Journal of Oral Implantology (2015)
8. Effect of Cantilever Length on Stress Distribution Around Implants in Mandibular Overdentures Supported by Two and Three Implants, European Journal of Dentistry (2016)
Experts (# of related papers)
View all Related Experts
Mansour Rismanchian (18)
Amirhossein Fathi (14)
Other Related Docs
9. Stability of Implant-Abutment Connection in Three Different Systems After Fatigue Test, Journal of Indian Prosthodontic Society (2022)
10. Comparison of Full-Arch Mandibular Reconstruction With Dental Implants Using Completely Splinted or Segmentally Splinted Prostheses With Two Different Occlusal Schemes: A Finite-Element Analysis, Journal of Prosthodontics (2024)
11. Implant-Retained Mandibular Bar-Supported Overlay Dentures: A Finite Element Stress Analysis of Four Different Bar Heights, Journal of Oral Implantology (2012)
12. Investigating the Effect of Nonrigid Connectors on the Success of Tooth-And-Implant-Supported Fixed Partial Prostheses in Maxillary Anterior Region: A Finite Element Analysis (Fea), International Journal of Dentistry (2021)
13. Retentive Strength of Implant-Supported Base Metal Copings Over Short Metal Abutments Using Different Luting Agents and Surface Treatments, Implant Dentistry (2014)
14. Evaluation of the Three-Dimensional Accuracy of Implant Impression Techniques in Two Simulated Clinical Conditions by Optical Scanning, International Journal of Oral and Maxillofacial Implants (2015)
15. Retention of Implant-Supported Overdenture With Bar/Clip and Stud Attachment Designs, Journal of Oral Implantology (2013)
16. The Anterior Palate As a Donor Site in Maxillofacial Bone Grafting: A Quantitative Anatomic Study, Journal of Oral and Maxillofacial Surgery (2005)
17. Stress Analysis of Ball and Locator Attachments and Bone in Overdenture Supported by Tissue Level and Bone Level Implants: A Three-Dimensional Finite Element Analysis, Journal of International Oral Health (2016)
18. Fabricating Dental Implants With Predesigned Structure, Emerging Technologies in Oral and Maxillofacial Surgery (2023)
19. Comparison of Marginal and Internal Adaptation of Cad/Cam and Conventional Cement Retained Implant-Supported Single Crowns, Implant Dentistry (2016)
20. Stress Analysis of Mandibular Implant-Retained Overdenture With Independent Attachment System: Effect of Restoration Space and Attachment Height, General Dentistry (2015)
21. Finite Element Method Analysis of Stress Distribution to Supporting Tissues in a Class Iv Aramany Removable Partial Denture (Part Ii: Bone and Mucosal Membrane), Journal of Contemporary Dental Practice (2008)
22. Effect of Shape and Design of the Internal Connection of Tissue-Level and Bone-Level Implants on Detorque Values and Removal Forces: An in Vitro Study, Journal of Prosthetic Dentistry (2024)
23. The Effects of Splinting Periodontally Compromised Removable Partial Denture Abutments on Bone Stresses: A Three-Dimensional Finite Element Study, Journal of Dental Sciences (2010)
24. Effect of Macro-Design of Immediately Loaded Implants on Micromotion and Stress Distribution in Surrounding Bone Using Finite Element Analysis, Implant Dentistry (2009)
25. Effect of Different Impression Materials and Techniques on the Dimensional Accuracy of Implant Definitive Casts, Dental Research Journal (2015)
26. Micromotion and Stress Distribution of Immediate Loaded Implants: A Finite Element Analysis, Clinical Implant Dentistry and Related Research (2009)
27. Effect of Using Nano and Micro Airborne Abrasive Particles on Bond Strength of Implant Abutment to Prosthesis, Brazilian Dental Journal (2015)
28. Clinical Outcomes of Dental Implants Placed in Fresh Sockets: A Five-Year Retrospective Study, Saudi Dental Journal (2024)
29. Comparison of Stress and Strain Distribution Patterns in Canine Implant and Maxillary Bone in Three Occlusal Schemes Using Finite Element Analysis, European Journal of Dentistry (2024)
30. Five Year Clinical Outcomes of Metal Ceramic and Zirconia-Based Implant-Supported Dental Prostheses: A Retrospective Study, Journal of Dentistry (2020)
31. Comparison of the Accuracy of Open-Tray and Snap-On Impression Techniques of Implants With Different Angulations, Dental Research Journal (2019)
32. Applicability of Cone Beam Computed Tomography Gray Values for Estimation of Primary Stability of Dental Implants; [Aplicabilidade Dos Valores De Cinza Da Tomografia Computadorizada De Feixe Conico Na Estimativa Da Estabilidade Primaria De Implantes Dentarios], Brazilian Dental Science (2021)
33. How the Initial Retentive Force of Implant‑Supported Overdentures Can Be Affected With Splinted and Unsplinted Attachments Systems, Dental Research Journal (2021)
34. Long-Term Clinical Outcomes of Single Crowns or Short Fixed Partial Dentures Supported by Short (≤6 Mm) Dental Implants: A Systematic Review, European Journal of Dentistry (2024)
35. The Effect of Ferrule/Crown Ratio and Post Length on the Applied Stress and Strain Distribution to the Endodontically Treated Maxillary Central Teeth: A Finite Element Analysis, Frontiers in Dentistry (2023)
36. Buckling Analysis of a Functionally Graded Implant Model for Treatment of Bone Fractures: A Numerical Study, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (2017)
37. Assessment of the Relationship Between Maximum Occlusal Force and Median Mandibular Flexure in Adults: A Clinical Trial Study, Journal of Indian Prosthodontic Society (2020)
38. One-Year Clinical and Radiographic Assessment of Fluoride-Enhanced Implants on Immediate Non-Functional Loading in Posterior Maxilla and Mandible: A Pilot Prospective Clinical Series Study, Clinical Oral Implants Research (2011)
39. Significance of the Width of Keratinized Mucosa on the Health Status of the Supporting Tissue Around Implants Supporting Overdentures., The Journal of oral implantology (2009)
40. Internal and Marginal Fit Accuracy of Pre-Sintered Cad/Cam Implant-Supported Frameworks Before and After Porcelain Layering, International Journal of Oral and Maxillofacial Implants (2022)
41. Comparison of the Outcomes and Complications of Three-Unit Porcelain-Fused-To-Metal Tooth-Implant-Supported Prostheses With Implant-Supported Prostheses: A Systematic Review and Meta-Analysis, Dental Research Journal (2023)
42. Does the Crown-Implant Ratio Affect the Survival and Complications of Implant-Supported Prostheses? a Systematic Review, Journal of Prosthetic Dentistry (2024)
43. Marginal Accuracy of Cad/Cam Frameworks Fabricated by Presintered Cobalt-Chromium Alloy: A Systematic Review and Meta-Analysis, International Journal of Oral and Maxillofacial Implants (2023)
44. Effects of Impression Coping Design, Impression Technique, and Dental Undercuts on the Accuracy of Implant Impressions Assessed by 3-Dimensional Optical Scanning: An in Vitro Study, Implant Dentistry (2016)
45. Flexural Strength of Interim Resin Materials for Fixed Prosthodontics, Journal of Prosthodontics (2009)
46. Average Annual Crestal Bone Loss of Iti Implants Following the First Year of Loading, Journal of Research in Medical Sciences (2006)
47. A Comparative Study of Fracture Resistance of Endodontically Treated Compromised Teeth With Different Post Systems: An in Vitro Study, Open Dentistry Journal (2023)
48. Bone Loss-Related Factors in Tissue and Bone Level Dental Implants: A Systematic Review of Clinical Trials, Journal of the Korean Association of Oral and Maxillofacial Surgeons (2021)
49. Investigation of Peri-Implant Bone Healing Using Autologous Plasma Rich in Growth Factors in the Canine Mandible After 12 Weeks: A Pilot Study, Open Dentistry Journal (2011)
50. Design of a Textile Composite Bone Plate Using 3D-Finite Element Method, Materials and Design (2010)