Isfahan University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Share this content! On (X network) By
The Accuracy of Linear and Angular Measurements in the Different Regions of the Jaw in Cone-Beam Computed Tomography Views Publisher



Abdinian M1 ; Baninajarian H2
Authors
Show Affiliations
Authors Affiliations
  1. 1. Department of Oral and Maxillofacial Radiology, Dental Implants Research Center, Isfahan University of Medical Sciences, Isfahan, Iran
  2. 2. Dental Students Research Center, School of Dentistry, Isfahan University of Medical Sciences, Hezarjerib St, Isfahan, Iran

Source: Dental Hypotheses Published:2017


Abstract

Introduction: The use of cone-beam computed tomography (CBCT) has increased lately. The aim of this study was to evaluate the accuracy of linear and angular measurements by CBCT in the different areas of the jaws. Materials and Methods: In this study, the mesiodistal width and height as well as the angular measurements were ascertained in four different sites of the mandibular and maxillary jaws (anterior, canine, premolar, and molar regions). Each area was outlined by gutta-percha as opaque markers. The measurements were obtained by a digital caliper (as gold standard) and on CBCT views including 'three-dimensional' and 'panaroma' (section thickness of 5 and 10 mm). Data were analyzed by the one-way analysis of variance (ANOVA). Results: The means [standard deviation (SD)] of measurement accuracy of all groups were more than 90%. There was no significant difference between the means (SD) of measurement accuracy of all views (oneway ANOVA, P > 0.05). The means (SD) of measurement accuracy of all views in four regions of the jaws had no significant difference (one-way ANOVA, P > 0.05). Conclusion: This study showed that CBCT imaging has a high degree of measurement accuracy in all three horizontal, vertical, and angular measurements as well as the 'panorama' (5- and 10-mm thicknesses) and 'three-dimensional' views in all the areas of the jaws. Therefore, the use of CBCT in the linear and angular measurements of the dentomaxillofacial region can be recommended. © 2017 Dental Hypotheses.
Related Docs
View other Related Docs
1. Impact of Using Standard and High‑Resolution Exposure Modalities of Cone‑Beam Computed Tomography (Cbct) System for Dental Implants Dimension Measurements, Advanced Biomedical Research (2023)
2. Accuracy of Linear Measurements of Galileos Cone Beam Computed Tomography in Normal and Different Head Positions, International Journal of Dentistry (2012)
3. The Effect of Changing Focal Trough in a Panoramic Device on the Accuracy of Distance Measurements, Dental Hypotheses (2018)
4. Accuracy and Reliability of Linear Measurements Using Tangential Projection and Cone Beam Computed Tomography, Dental Research Journal (2015)
5. Comparison of the Absorbed Doses of Eyes, Thyroid and Parotid Glands in Dental Cone Beam Computed Tomography (Cbct) and Panoramic Examinations Using Cranex® 3D, Journal of Isfahan Medical School (2016)
6. Detection of Vertical Root Fractures Using Cone-Beam Computed Tomography in the Presence and Absence of Gutta-Percha, Scientific World Journal (2018)
7. Prevalence of C-Shaped Canals and Three-Rooted Mandibular Molars in the Iranian Population by Using Cone-Beam Computed Tomography, Clinical and Experimental Dental Research (2023)
8. Removing Distortion of Periapical Radiographs in Dental Digital Radiography Using Embedded Markers in an External Frame, Journal of Medical Signals and Sensors (2012)
Experts (# of related papers)
View all Related Experts
Parisa Soltani (15)
Mojdeh Mehdizadeh (14)
Other Related Docs
9. Evaluation of the Effect of Amalgam Fillings on the Diagnosis of Proximal Caries Using Cone‑Beam Computed Tomography Technique, Dental Research Journal (2023)
10. Effect of Field of View on Detection of Condyle Bone Defects Using Cone Beam Computed Tomography, Journal of Craniofacial Surgery (2016)
11. Cone-Beam Computed Tomographic Analysis of Canal Transportation and Centering Ability of Single-File Systems, Journal of Endodontics (2018)
12. Age Estimation Based on Pulp–Tooth Volume Ratio of Anterior Teeth in Cone-Beam Computed Tomographic Images in a Selected Population: A Cross-Sectional Study, Applied Sciences (Switzerland) (2021)
13. Comparison of Intraoral Digital Radiography and Cone-Beam Computed Tomography in the Measurement of Periodontal Bone Defects; [Porownanie Radiografii Cyfrowej I Tomografii Stozkowej W Ocenie Wielkosci Periodontologicznych Ubytkow Kostnych], Dental and Medical Problems (2020)
14. Comparison of Accuracy Between Pulp/Tooth Ratio and Tooth Coronal Index Methods for Dental Age Estimation Using Digital Panoramic Radiographs, Pesquisa Brasileira em Odontopediatria e Clinica Integrada (2023)
15. Evaluation of the Relationship Between Mandibular Third Molar and Mandibular Canal by Different Algorithms of Cone-Beam Computed Tomography, Journal of Contemporary Dental Practice (2015)
16. Efficacy of Two Radiographic Algorithms for Detection of Peri-Implant Bone Defects on Cone-Beam Computed Tomography Scans, BMC Oral Health (2025)
17. Accuracy of Tooth-Implant Impressions: Comparison of Five Different Techniques, Clinical and Experimental Dental Research (2023)
18. An Ex Vivo Analysis of Apical Transportation in Root Canals Prepared With Bt Race Rotary and Hand K-Flexofile by Cone Beam Computed Tomography, Journal of Mazandaran University of Medical Sciences (2020)
19. Comparison of Clinical and Radiographic Success Between Mta and Biodentine in Pulpotomy of Primary Mandibular Second Molars With Irreversible Pulpitis: A Randomized Double-Blind Clinical Trial, International Journal of Dentistry (2022)
20. Functional Needs in Orthognathic Patients With Different Sagittal Skeletal Discrepancies, Oral Surgery, Oral Medicine, Oral Pathology and Oral Radiology (2024)
21. Panoramic-Based Radiographic Indices As Indicators of Bone Mineral Density at the Lumbar Spine; [Wskazniki Wyznaczane Na Zdjeciach Pantomograficznych Jako Parametry Gestosci Kosci Czesci Ledzwiowej Kregoslupa], Dental and Medical Problems (2015)
22. Radiographic Assessment of Third Molars Development and It's Relation to Dental and Chronological Age in an Iranian Population, Dental Research Journal (2015)
23. Comparison of Condylar Bone Density in Cone-Beam Computed Tomographic Images of Patients With and Without Temporomandibular Joint Disorders, Journal of Orofacial Sciences (2021)
24. Do Metal Artifact Reduction Algorithms Influence the Detection of Implant-Related Injuries to the Inferior Alveolar Canal in Cbct Images?, BMC Oral Health (2024)
25. Evaluation of the Cbct Imaging Accuracy in the Volumetric Assessment of Unilateral Alveolar Cleft, Journal of Stomatology, Oral and Maxillofacial Surgery (2021)
26. Applicability of Cone Beam Computed Tomography Gray Values for Estimation of Primary Stability of Dental Implants; [Aplicabilidade Dos Valores De Cinza Da Tomografia Computadorizada De Feixe Conico Na Estimativa Da Estabilidade Primaria De Implantes Dentarios], Brazilian Dental Science (2021)
27. Effect of Digital Noise Reduction on the Accuracy of Endodontic File Length Determination, Imaging Science in Dentistry (2013)
28. Comparison of Ultrasonography, Magnetic Resonance Imaging and Cone Beam Computed Tomography for Detection of Foreign Bodies in Maxillofacial Region, Journal of Clinical and Diagnostic Research (2017)
29. Comparison of Periapical Parallel Radiography With Cbct With Different Field of Views (Fov) for the Detection of Periapical Lesions, Dental Research Journal (2024)
30. Analysis of Artifacts in Oral and Maxillofacial Histopathologic Sections and Related Reasons, Dental Research Journal (2019)
31. Comparison of Full-Arch Mandibular Reconstruction With Dental Implants Using Completely Splinted or Segmentally Splinted Prostheses With Two Different Occlusal Schemes: A Finite-Element Analysis, Journal of Prosthodontics (2024)
32. Assessment of the Relationship Between Maximum Occlusal Force and Median Mandibular Flexure in Adults: A Clinical Trial Study, Journal of Indian Prosthodontic Society (2020)
33. Incidental Findings in Temporomandibular Joint Region Detected by Cone-Beam Computed Tomography: A Retrospective Study, Open Dentistry Journal (2020)
34. Comparison of Accuracy Between Panoramic Radiography, Cone-Beam Computed Tomography, and Ultrasonography in Detection of Foreign Bodies in the Maxillofacial Region: An in Vitro Study, Journal of the Korean Association of Oral and Maxillofacial Surgeons (2018)
35. Effect of Different Impression Materials and Techniques on the Dimensional Accuracy of Implant Definitive Casts, Dental Research Journal (2015)
36. Prediction of Lip Response to Orthodontic Treatment Using a Multivariable Regression Model, Dental Research Journal (2016)
37. Effects of Impression Coping Design, Impression Technique, and Dental Undercuts on the Accuracy of Implant Impressions Assessed by 3-Dimensional Optical Scanning: An in Vitro Study, Implant Dentistry (2016)
38. Evaluation of the Correlation Between Intracranial Pressures Measured by Schiotz Tonometer and Computed Tomography Scan Findings in Craniotomy Patients Before Dura Opening, Journal of Isfahan Medical School (2013)
39. Quantitative Evaluation of the Canalis Sinuosus Relative to Adjacent Structures in Cone-Beam Computed Tomography Images, Journal of Advanced Periodontology and Implant Dentistry (2024)
40. Average Annual Crestal Bone Loss of Iti Implants Following the First Year of Loading, Journal of Research in Medical Sciences (2006)
41. Model of Age Estimation Based on Dental Factors of Unknown Cadavers Among Iranians, Journal of Forensic Sciences (2003)
42. Comparative Evaluation of the Effectiveness of Different Rotary Systems in Removal of Root Canal Filling Materials, Giornale Italiano di Endodonzia (2022)
43. Effects of Immediate Orthodontic and Orthopedic Forces on Peri-Miniscrew Bones: Histomorphologic and Histomorphometric Assessment in Dogs, International Journal of Dentistry (2012)
44. Comparative Evaluation of Apical Constriction Position in Incisor and Molar Teeth: An in Vitro Study, European Journal of Dentistry (2018)
45. Evaluation of the Effect of Direct Sinus Lift Surgery on Maxillary Sinus Volume by Mimics Software, National Journal of Maxillofacial Surgery (2023)
46. Micro-Ct Evaluation of Four Root Canal Obturation Techniques, Scanning (2021)
47. Comparison of Dose-Area Product in Panoramic and Cone-Beam Computed Tomography Radiographies at Adult and Pediatric Age Groups in Yazd Province, Iran, Journal of Isfahan Medical School (2020)
48. A Quantitative Evaluation of the Effectiveness of the Metal Artifact Reduction Algorithm in Cone Beam Computed Tomographic Images With Stainless Steel Orthodontic Brackets and Arch Wires: An Ex Vivo Study, Diagnostics (2024)
49. Evaluation of Relationship Between Exposure Parameters and Maxillofacial Bone Quality With Salivary Glands Absorbed Dose in Cone Beam Computed Tomography Imaging, Journal of Contemporary Dental Practice (2018)
50. The Diagnostic Value of 3-Dimensional Computerized Tomography (3Dct) Scan Indicators of Mandible Bone in Sex Determination of Selected Individuals in Tehran, Medical Journal of the Islamic Republic of Iran (2022)