Isfahan University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Share this content! On (X network) By
Determination of Design Parameters of Urban Wastewater Treatment Plants in the Cold Regions of Iran



Sadeghi M1 ; Hashemi H2 ; Teimouri F2
Authors
Show Affiliations
Authors Affiliations
  1. 1. Department of Environmental Health Engineering, School of Health, Shahrekord University of Medical Sciences, Shahrekord, Iran
  2. 2. Environmrnt Research Center, Isfahan University of Medical Sciences, Isfahan, Iran

Source: International Journal of Environmental Health Engineering Published:2012

Abstract

Aims: This study has been conducted to focus on the localization of the design parameters used for the design of wastewater treatment plants in a region of Iran. Materials and Methods: Three wastewater treatment plants were selected (as models) in a cold weather region of Iran. The main characteristics of the wastewater, such as, flow rate and its fluctuations, total solids, and the organic and nutrient contents, which play an important role in the design and operation of the wastewater treatment facilities, were measured for the selected plants during a year. Results: The averages of the design parameters for the investigated plants, including, biochemical oxygen demand (BOD5), chemical oxygen demand (COD), total suspended solids (TSS), volatile suspended solids (VSS), total Kjeldahl nitrogen (TKN), and total phosphorous (TP) were, 41, 60, 65, 47, 8.3, and 0.93 g/capita, respectively. Wastewater production was 177 lit/cap-day with a maximum and minimum coefficient of 1.76 and 0.29, respectively. Conclusions: Using design parameters based on the local characteristics and the real-world conditions of the wastewater, can result in more+operational efficiency in the wastewater plants. It is suggested that the results of this study can be applied to the design of wastewater facilities throughout Iran, with the same local conditions. © 2012 Medknow. All Rights Reserved.
4. Determination of Biokinetic Coefficients for Activated Sludge Processes on Municipal Wastewater, Iranian Journal of Environmental Health Science and Engineering (2011)
Experts (# of related papers)
Other Related Docs
10. Microwave/Hydrogen Peroxide Processes, Advanced Oxidation Processes for Wastewater Treatment: Emerging Green Chemical Technology (2018)
20. Feasibility Energy Recovery Potential of Municipal Solid Waste in Northwest of Iran, International Journal of Environmental Health Engineering (2012)
21. Evaluation of Stability Parameters in In-Vessel Composting of Municipal Solid Waste, Iranian Journal of Environmental Health Science and Engineering (2011)
22. Evaluation of Flat Sheet Membrane Bioreactor Efficiency for Municipal Wastewater Treatment, International Journal of Environmental Health Engineering (2012)
25. Biological Excess Sludge Reduction in Adsorption/Bio-Oxidation Process by Enhancing Predators' Growth, International Journal of Environmental Health Engineering (2020)
32. Accumulation of Heavy Metals in Agricultural Products Irrigated With Treated Municipal Wastewater, International Journal of Environmental Health Engineering (2012)
33. Anaerobic Biodegradation of Ethylene Dichloride in an Anaerobic Sequential Batch Reactor, International Journal of Environmental Health Engineering (2012)
34. The Study of Leachate Treatment by Using Three Advanced Oxidation Process Based Wet Air Oxidation, Iranian Journal of Environmental Health Science and Engineering (2013)
39. Composting Leachate Treatment by an Anaerobic Migrating Blanket Reactor, Ecology, Environment and Conservation (2015)
41. Measurement and Simulation of Dissolved Oxygen in Zayandehrood River, International Journal of Environmental Health Engineering (2012)
44. Implementation of Hazard Analysis and Critical Control Points in the Drinking Water Supply System, International Journal of Environmental Health Engineering (2012)