Tehran University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Share this content! On (X network) By
Investigation of Operational Parameters Influencing in Treatment of Dye From Water by Electro-Fenton Process Publisher



Rahmani AR1 ; Shabanloo A2 ; Fazlzadeh M3 ; Poureshgh Y4
Authors
Show Affiliations
Authors Affiliations
  1. 1. Faculty of Health and Research Center for Health Sciences, Department of Environmental Health Engineering, Hamadan University of Medical Sciences, Hamadan, Iran
  2. 2. Department of Environmental Health Engineering, School of Public Health, Hamadan University of Medical Sciences, Hamadan, Iran
  3. 3. Department of Environmental Health Engineering, School of Public Health, Ardabil University of Medical Sciences, Ardabil, Iran
  4. 4. Department of Environmental Health Engineering, School of Public Health, Tehran University of Medical Sciences, Tehran, Iran

Source: Desalination and Water Treatment Published:2016


Abstract

In this paper, the degradation of Acid Black 1 (AB1) and Acid Blue 113 (AB113) of azo dyes was studied by electro-Fenton process using an iron electrode to generate Fe2+ ions in a batch reactor. In order to reach the maximum efficiency of the process, effective parameters such as: solution pH, operating time, current density, H2O2, and dye concentration were investigated. The experimental data indicated that pH, H2O2 and dye concentration played an important role in the process. The results showed that decolorization decreased with increasing pH; for instance, the maximum decolorization efficiencies 27 and 47% were obtained, respectively, for AB113 and AB1 at pH 11 and reaction time = 10 min. The best conditions for both dyes were obtained at reaction time of 10 min, pH 3.0, H2O2 concentration of 100 mg/L and current density of 5 mA/cm2. In this case, COD removal rates were, respectively, 83.5 and 92.3% for AB113 and AB1 after 30 min. © 2016 Balaban Desalination Publications. All rights reserved.
Related Docs
1. Photoperoxi-Coagulation Using Activated Carbon Fiber Cathode As an Efficient Method for Benzotriazole Removal From Aqueous Solutions: Modeling, Optimization and Mechanism, Journal of Photochemistry and Photobiology A: Chemistry (2016)
2. Dissociation of Acid Blue 113 Dye From Aqueous Solutions Using Activated Persulfate by Zero Iron Nanoparticle From Green Synthesis: The Optimization Process With Rsm-Bbd Model: Mineralization and Reaction Kinetic Study, Biomass Conversion and Biorefinery (2024)
3. Application of a Three-Dimensional Electrochemical Process Catalyzed by Mwcnts-Oh As Particle Electrode for Ciprofloxacin Removal From Aqueous Solutions, Desalination and Water Treatment (2021)
4. Photocatalytic Degradation and Mineralization of Diazinon in Aqueous Solution Using Nano-Tio2(Degussa, P25): Kinetic and Statistical Analysis, Desalination and Water Treatment (2015)