Band Pass Filter Plan in Fluoroscopy for High Energy Range Publisher



Khorshidi A¹ ; Abdollahi A¹ ; Pirouzi A¹ ; Hosseini SH^{1, 2} Show Affiliations
Source: SN Applied Sciences Published:2020

Abstract

In fluoroscopy, the absorption edge, the energy range, and the X-ray spectrum peak are the most important factors in filtration to obtain a proper image. Here, an experimental study was conducted to determine the filters that remove low-energy spectrums and attenuate high-energy ranges so that they cannot fundamentally affect image quality and diminish the absorbed dose by the patient. Considering the attenuation curves of proper elements besides accessibility and productivity issues, three elements were investigated that comprised Copper, Lead and Tin with diverse thicknesses in the X-ray energy range of 100 to 125 keV. Also, a simulation study by Monte Carlo N-Particle code was performed with an accuracy of 99%. The findings demonstrated that the use of a 0.1 mm lead filter retains the best image quality along with a significant reduction in the dose ratio obtained by raising milliampere. Multi or auxiliary filters require additional testing to achieve better image quality. In order to obtain the best possible X-ray band pass spectrum, the analysis of the attenuation and absorption profiles of the various elements plays an essential role in the calculation of the output intensities. © 2019, Springer Nature Switzerland AG.