Performance Evaluation of Chitosan in the Adsorption of Antibiotic Metronidazole From Aquatic Environments: Molding Using Response Surface Methodology Based on Central Composite Design, Isotherm and Kinetic Studies

Performance Evaluation of Chitosan in the Adsorption of Antibiotic Metronidazole From Aquatic Environments: Molding Using Response Surface Methodology Based on Central Composite Design, Isotherm and Kinetic Studies Publisher

Salari M¹ ; Shabanloo A² ; Darvish Motevalli M³ ; Nazmara S⁴ ; Eslami F⁵

Show Affiliations

1. Dept. of Environmental Health Engineering, School of Public Health, Hamadan University of Medical Science, Student Research Committee, Hamadan, Iran
2. Dept. of Environmental Health Engineering, School of Public Health, Hamadan University of Medical Science, Hamadan, Iran
3. Dept. of Environmental Health Engineering, School of Public Health, Isfahan University of Medical Sciences, Isfahan, Iran
4. Dept. of Environmental Health Engineering, School of Public Health, Tehran University of Medical Sciences, Tehran, Iran
5. Dept. of Environmental Health Engineering, School of Public Health, Jiroft University of Medical Sciences, Jiroft, Iran

Source: Journal of Knowledge and Health in Basic Medical Sciences Published:2019

Abstract

Introduction: Antibiotics presence in drinking waters causes health problems for humans. The present study investigated chitosan potential in the adsorption of antibiotic Metronidazole from aquatic environments. Methods: The current study was conducted in an experimental scale in a batch system. The effect of input variables including pH, operating time, chitosan dose, and Metronidazole concentration on the adsorption performance was investigated in a central composite design upon on response surface methodology. Isotherm and kinetic studies also were explored in optimum condition of inputs variables. To detect the residual concentration of Metronidazole, the DR 5000 spectrophotometer at the 320 nm wavelength was applied. Results: The results showed that the adsorption process follows a second-order polynomial model with F-value=990.936 and P<0.0001, R2=0.9989 and Adj-R2=0.9979. The optimum level of independent variables includes pH=4.74, contact time= 60 min, chitosan dose=1.5 g/L and Metronidazole concentration=20 mg/L, in which the highest removal efficiency was obtained about 85%. In the following, it was observed that the adsorption process corresponds to Langmuir isotherm and pseudo-first-order kinetic models with R2 value of 0.9965 and 0.9859, respectively. Conclusion: In this study, it was observed that the chitosan has a high ability in the adsorption of Metronidazole; therefore, chitosan compound can be proposed as neutral adsorbent with major potential in adsorption of Metronidazole and other similar antibiotics from aqueous environments. © 2019, Shahroud University of Medical Sciences. All rights reserved.

Related Docs

View other Related Docs

1. High Performance Removal of Phenol From Aqueous Solution by Magnetic Chitosan Based on Response Surface Methodology and Genetic Algorithm, Journal of Molecular Liquids (2019)

2. Efficiency of Magnitized Graphene Oxide Nanoparticles in Removal of 2,4-Dichlorophenol From Aqueous Solution, Journal of Mazandaran University of Medical Sciences (2017)

3. Process Modeling of Municipal Solid Waste Compost Ash for Reactive Red 198 Dye Adsorption From Wastewater Using Data Driven Approaches, Scientific Reports (2021)

4. Occurrence and Fate of Most Prescribed Antibiotics in Different Water Environments of Tehran, Iran, Science of the Total Environment (2018)

5. Evaluation of Magnetic Zsm-5 Composite Performance in 2, 4 Dichlorophenol Removal From Synthetic Solutions: Response Surface Method (Rsm) Modeling and Isotherm, Kinetic and Thermodynamic Studies, Desalination and Water Treatment (2019)

6. Recent Progress on the Remediation of Metronidazole Antibiotic As Emerging Contaminant From Water Environments Using Sustainable Adsorbents: A Review, Journal of Water Process Engineering (2023)

7. Environmental Risk Assessments of Multiclass Pharmaceutical Active Compounds: Selection of High Priority Concern Pharmaceuticals Using Entropy-Utility Functions, Environmental Science and Pollution Research (2021)

8. Antibiotic Detection in a Hospital Wastewater and Comparison of Their Removal Rate by Activated Sludge and Earthworm-Based Vermifilteration: Environmental Risk Assessment, Process Safety and Environmental Protection (2020)

Experts (# of related papers)

View all Related Experts

Mohammadhadi Dehghani Tafti (4)

Mahmood Alimohammadi (1)

Style	Citing Format
MLA	Salari M, et al.. "Performance Evaluation of Chitosan in the Adsorption of Antibiotic Metronidazole From Aquatic Environments: Molding Using Response Surface Methodology Based on Central Composite Design, Isotherm and Kinetic Studies." Journal of Knowledge and Health in Basic Medical Sciences, vol. 14, no. 1, 2019, pp. 3-11.
APA	Salari M, Shabanloo A, Darvish Motevalli M, Nazmara S, Eslami F (2019). Performance Evaluation of Chitosan in the Adsorption of Antibiotic Metronidazole From Aquatic Environments: Molding Using Response Surface Methodology Based on Central Composite Design, Isotherm and Kinetic Studies. Journal of Knowledge and Health in Basic Medical Sciences, 14(1), 3-11.
Chicago	Salari M, Shabanloo A, Darvish Motevalli M, Nazmara S, Eslami F. "Performance Evaluation of Chitosan in the Adsorption of Antibiotic Metronidazole From Aquatic Environments: Molding Using Response Surface Methodology Based on Central Composite Design, Isotherm and Kinetic Studies." Journal of Knowledge and Health in Basic Medical Sciences 14, no. 1 (2019): 3-11.
Harvard	Salari M et al. (2019) 'Performance Evaluation of Chitosan in the Adsorption of Antibiotic Metronidazole From Aquatic Environments: Molding Using Response Surface Methodology Based on Central Composite Design, Isotherm and Kinetic Studies', Journal of Knowledge and Health in Basic Medical Sciences, 14(1), pp. 3-11.
Vancouver	Salari M, Shabanloo A, Darvish Motevalli M, Nazmara S, Eslami F. Performance Evaluation of Chitosan in the Adsorption of Antibiotic Metronidazole From Aquatic Environments: Molding Using Response Surface Methodology Based on Central Composite Design, Isotherm and Kinetic Studies. Journal of Knowledge and Health in Basic Medical Sciences. 2019;14(1):3-11.
BibTex	@article{ author = {Salari M and Shabanloo A and Darvish Motevalli M and Nazmara S and Eslami F}, title = {Performance Evaluation of Chitosan in the Adsorption of Antibiotic Metronidazole From Aquatic Environments: Molding Using Response Surface Methodology Based on Central Composite Design, Isotherm and Kinetic Studies}, journal = {Journal of Knowledge and Health in Basic Medical Sciences}, volume = {14}, number = {1}, pages = {3-11}, year = {2019} }
RIS	TY - JOUR AU - Salari M AU - Shabanloo A AU - Darvish Motevalli M AU - Nazmara S AU - Eslami F TI - Performance Evaluation of Chitosan in the Adsorption of Antibiotic Metronidazole From Aquatic Environments: Molding Using Response Surface Methodology Based on Central Composite Design, Isotherm and Kinetic Studies JO - Journal of Knowledge and Health in Basic Medical Sciences VL - 14 IS - 1 SP - 3 EP - 11 PY - 2019 ER -

Science Communicator Platform

Authors

Authors Affiliations

Abstract