Isfahan University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Share this content! On (X network) By
Effects of Debonding of Orthodontic Brackets on Topography and Surface Roughness of Composite Restorations Publisher Pubmed



Moradi M1 ; Hormozi E2 ; Shamohammadi M3 ; Rakhshan V4
Authors
Show Affiliations
Authors Affiliations
  1. 1. Department of Orthodontics, School of Dentistry, North Khorasan University of Medical Sciences, Bojnurd, Iran
  2. 2. Department of Orthodontics, School of Dentistry, Isfahan University of Medical Sciences, Isfahan, Iran
  3. 3. Department of Orthodontics, Ahvaz Jundishapur University of Medical Sciences, School of dentistry, Ahvaz, Iran
  4. 4. Department of Dental Anatomy, faculty of dentistry, Azad University, Tehran, Iran

Source: International Orthodontics Published:2018


Abstract

Background: To increase bond strength of brackets bonded to composite restorations, underlying composite restorations are usually roughened. This and subsequent bracket debonding might deteriorate smoothness of composite restoration, leading to clinical and aesthetic problems. Since this was not assessed before, this study was conducted. Methods: Seventy intact human premolars were collected and filled with composite restorations. They were randomly divided into 3 groups: control (n = 10), surface treatments before bracket bonding (bur, sandblasting, overall n = 40), and surface roughening without bracket bonding (bur, sandblasting, overall n = 20). The 40 specimens with bracket bonding steps were divided into two subgroups of with and without polishing after debonding of brackets (each n = 10). After aging the composites in two steps and treating surfaces according to abovementioned protocols, their surface topographies were evaluated under stereomicroscopy (80 ×), scanning electron microscopy (using Zachrisson-Arthun index, at 500 × and 1000 × zooms), and by profilometry. Profilometry parameters and Zachrisson-Arthun index were statistically compared among different groups (α = 0.05, 0.005). Results: According to Kruskal-Wallis test, all profilometry parameters or the Zachrisson and Arthun index were significantly different between groups involving bracket debonding and control (P ≤ 0.001). Three-way ANOVA indicated that bracket debonding, polishing after debonding, and surface treatments before bracket bonding had a significant effect on Ra and Rz (P ≤ 0.05). Tukey post hoc test showed that bur and sandblasting methods were not significantly different (P > 0.05). Conclusion: Bur-roughening or sandblasting of composite surface before bonding brackets can increase surface roughness, while polishing can reduce it back to control levels. © 2018
Related Docs
View other Related Docs
1. Effects of Debonding of Orthodontic Brackets on Topography and Surface Roughness of Composite Restorations; [Effets De La Depose Des Attaches Orthodontiques Sur La Topographie Et La Rugosite De Surface Des Restaurations En Composite], International Orthodontics (2018)
2. Comparison of Shear Bond Strength and Enamel Surface Changing Between the Two-Step Etching and Primer and Self-Etch Primer Methods in Rebonding of Orthodontic Brackets: An in Vitro Study, Dental Research Journal (2019)
3. Comparison of Microleakage of Composite Restorations Using Fifth and Sixth Generation Dentin Bonding Agent: An in Vivo Study, Journal of Contemporary Dental Practice (2012)
4. Effect of Different Surface Treatment With Panaviav5 on Shear Bond Strength of Metal Brackets to Silver Amalgam, Dental Research Journal (2021)
5. The Effect of Remineralization Pretreatments on the Enamel Bond Strength of Demineralized and Sound Enamel: An in Vitro Study, Dental Research Journal (2025)
6. Effect of Laser Irradiation on Push-Out Bond Strength of Dental Fiber Posts to Composite Resin Core Buildups: A Systematic Review and Meta-Analysis, Photodiagnosis and Photodynamic Therapy (2019)
7. Comparative Evaluation of Microtensile Bond Strength of Four Glass-Containing Materials With Primary Teeth Dentin, Iranian Journal of Pediatrics (2019)
8. The Effect of Acrylate-Based Dental Adhesive Solvent Content on Microleakage in Composite Restorations, Dental Research Journal (2016)
Experts (# of related papers)
View all Related Experts
Pouran Samimi (6)
Kamyar Fathpour (5)
Other Related Docs
9. Bond Strength of Composite Resin to White Mineral Trioxide Aggregate: Effect of Different Surface Treatments, Journal of Conservative Dentistry (2018)
10. The Effect of Denture Adhesive on the Efficiency of Complete Denture in Patients With Different Alveolar Ridges, Dental Research Journal (2018)
11. Evaluation of the Effectiveness of Four Composite Polishing Systems: An in Vitro Study, International Journal of Prosthodontics and Restorative Dentistry (2024)
12. Enhancing Adhesive Performance With N, N, N', N'-Tetrakis (2-Pyridyl Methyl) Ethylenediamine Matrix Metalloproteinase Inhibitors: A Comprehensive Study of Degree of Conversion, Microleakage, and Micro-Tensile Bond Strength in Dental Adhesives, Journal of Conservative Dentistry and Endodontics (2025)
13. Comparative Evaluation of Effects of Different Surface Treatment Methods on Bond Strength Between Fiber Post and Composite Core, Journal of Advanced Prosthodontics (2012)
14. Resin Bonding Using Etch-And-Rinse and Self-Etch Adhesives to Decalcified Deciduous Enamel After Bioactive Glass Air Abrasion, The journal of contemporary dental practice (2014)
15. Evaluation of Light Curing Distance and Mylar Strips Color on Surface Hardness of Two Different Dental Composite Resins, Open Dentistry Journal (2014)
16. Effect of Fluoride Dentifrices on the Microhardness of Deciduous Enamel Surfaces, Oral Health and Preventive Dentistry (2012)
17. Porcelain Color Alteration After Orthodontic Bonding Using Three Different Surface Preparation Methods, Dental Research Journal (2018)
18. Mechanical and Dentin Bond Strength Properties of the Nanosilver Enriched Glass Ionomer Cement, Journal of Clinical and Experimental Dentistry (2019)
19. Evaluate the Difference in Failure Rates Between Amalgam and Composite Resin Posterior Restorations: A Systematic Review and Meta-Analysis, International Journal of Pharmaceutical Research (2020)
20. Effect of Bioactive Glass‑Containing Dentin Adhesives on Microshear Bond Strength of Composite Restorations, Dental Research Journal (2023)
21. Bond Strength Evaluation of Ceramic Restorations With Immediate Dentin Sealing: A Systematic Review and Meta-Analysis, Journal of Dentistry (Iran) (2024)
22. Shear Bond Strengths and Morphological Evaluation of Filled and Unfilled Adhesive Interfaces to Enamel and Dentine, International Journal of Dentistry (2012)
23. Reconstruction of Natural Smile and Splinting With Natural Tooth Pontic Fiber-Reinforced Composite Bridge, Case Reports in Dentistry (2022)
24. Impact of Silver Diamine Fluoride on Composite Resin Bond Strength: An in Vitro Study With Various Adhesive Systems, Heliyon (2025)
25. Prevention and Treatment of White Spot Lesions in Orthodontic Patients, Contemporary Clinical Dentistry (2017)
26. Evaluation of Three Restorative Techniques for Primary Anterior Teeth With Extensive Carious Lesions: A 1-Year Clinical Study, Journal of Dentistry for Children (2013)
27. A Comparative Study of Fracture Resistance of Endodontically Treated Compromised Teeth With Different Post Systems: An in Vitro Study, Open Dentistry Journal (2023)
28. Effect of Addition of Bioactive Glass to Resin Modified Glass Ionomer Cement on Enamel Demineralization Under Orthodontic Brackets, Journal of Clinical and Experimental Dentistry (2019)
29. Five Year Clinical Outcomes and Survival of Chairside Cad/Cam Ceramic Laminate Veneers — a Retrospective Study, Journal of Prosthodontic Research (2018)
30. Influence of Filler Existence on Microleakage of a Self-Etch Adhesive System, Journal of Conservative Dentistry (2014)
31. Effect of Dentin Dehydration and Composite Resin Polymerization Mode on Bond Strength of Two Self-Etch Adhesives, Contemporary Clinical Dentistry (2016)
32. Effect of Thermocycling and Water Storage on Bond Longevity of Two Self-Etch Adhesives, General Dentistry (2013)
33. Effect of Postbleaching Application of an Antioxidant on Enamel Bond Strength of Three Different Adhesives, Medicina Oral, Patologia Oral y Cirugia Bucal (2011)
34. Comparison of Microleakage in Class Ii Cavities Restored With Silorane-Based and Methacrylate-Based Composite Resins Using Different Restorative Techniques Over Time, Dental Research Journal (2015)
35. Comparison of Shear Strength of Metal and Ceramic Orthodontic Brackets Cemented to Zirconia Depending on Surface Treatment: An in Vitro Study, European Journal of Dentistry (2019)
36. Effect of Different Surface Treatment Methods on the Shear Bond Strength of Resin Composite/Zirconia for Intra-Oral Repair of Zirconia Restorations, European Journal of Dentistry (2023)
37. Comparison of Shear Bond Strength of Rebonded Stainless Steel Brackets With Three Different Enamel Surface Conditioning Methods, Dental Research Journal (2023)
38. Effect of Trichloroacetic Acid Hydrogel on Self-Etch Adhesive Bond Strength to Dental Tissues, Journal of Contemporary Dental Practice (2013)
39. In-Vitro Comparison of the Effect of Different Bonding Strategies on the Micro-Shear Bond Strength of a Silorane-Based Composite Resin to Dentin, Dental Research Journal (2016)
40. Interfacial Fracture Toughness of Universal Adhesive Systems Treated With an Antioxidant, Journal of Clinical and Experimental Dentistry (2018)
41. A New Solvent-Free One-Step Self-Etch Adhesive: Bond Strength to Tooth Structures, Journal of Contemporary Dental Practice (2013)
42. Comparison of Marginal and Internal Adaptation of Cad/Cam and Conventional Cement Retained Implant-Supported Single Crowns, Implant Dentistry (2016)
43. Effect of Sodium Ascorbate on the Shear Bond Strength of Orthodontic Brackets to Bleached Enamel Using Universal Dental Adhesive, Dental Research Journal (2023)
44. Effect of Ferric Sulfate Contamination on the Bonding Effectiveness of Etch-And-Rinse and Self-Etch Adhesives to Superficial Dentin, Journal of Conservative Dentistry (2013)
45. Comparison of Lithium Disilicate–Reinforced Glass Ceramic Surface Treatment With Hydrofluoric Acid, Nd:Yag, and Co2 Lasers on Shear Bond Strength of Metal Brackets, Clinical Oral Investigations (2021)
46. Effect of Dentin Conditioning on Bond Strength of Fiber Posts and Dentin Morphology: A Review, American Journal of Dentistry (2014)
47. A Comparison of Acrylic and Multilithic Teeth Bond Strengths to Acrylic Denture Base Material, Journal of Contemporary Dental Practice (2009)
48. Effect of Ceramic Thickness on the Polymerization Quality and Film Thickness of Dual-Polymerizing Versus Heated Light-Polymerizing Adhesive Cement, Journal of Prosthetic Dentistry (2024)
49. Effect of Mtad on the Shear Bond Strength of Self-Etch Adhesives to Dentin, Dental Research Journal (2012)
50. Marginal Microleakage of Resin-Modified Glass-Ionomer and Composite Resin Restorations: Effect of Using Etch-And-Rinse and Self-Etch Adhesives, Indian Journal of Dental Research (2012)