Isfahan University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Share this content! On (X network) By
Effect of Ferric Sulfate Contamination on the Bonding Effectiveness of Etch-And-Rinse and Self-Etch Adhesives to Superficial Dentin Publisher



Ebrahimi SF1 ; Shadman N1 ; Abrishami A2
Authors
Show Affiliations
Authors Affiliations
  1. 1. Department of Operative Dentistry, Faculty of Dentistry, Kerman University of Medical Sciences, Kerman, Iran
  2. 2. Department of Orthodontics, Isfahan University of Medical Sciences, Isfahan, Iran

Source: Journal of Conservative Dentistry Published:2013


Abstract

Aim: This study investigated the effect of one hemostatic agent on the shear bond strength of self-etch and etch-and-rinse adhesive systems. Materials and Methods: Sixty extracted third molars were selected. After preparing a flat surface of superficial dentin, they were randomly divided into six groups. Adhesives were Tetric N-Bond, AdheSE, and AdheSE One F. Before applying adhesives, surfaces were contaminated with ViscoStat for 60 s in three groups and rinsed. Then composite were attached to surfaces and light cured. After thermocycling, the bond strength was calculated and failure modes were determined by stereomicroscope. The data were analyzed by t-test and one-way ANOVA with P < 0.05 as the level of significance. Results: ViscoStat had significantly decreased the shear bond strength of AdheSE (P < 0.0001) to dentin. Modes of failures in all groups were mainly adhesive. Conclusion: Contamination had an adverse effect on the shear bond strength of AdheSE and reduced it.
Related Docs
View other Related Docs
1. Marginal Integrity of Low-Shrinkage and Methacrylate-Based Composite Resins: Effect of Three Different Hemostatic Agents, Journal of Clinical and Experimental Dentistry (2016)
2. Effect of Trichloroacetic Acid Hydrogel on Self-Etch Adhesive Bond Strength to Dental Tissues, Journal of Contemporary Dental Practice (2013)
3. Composite Resin Bond Strength to Caries-Affected Dentin Contaminated With 3 Different Hemostatic Agents, General Dentistry (2016)
4. The Effect of Washing Water Temperature on Resin-Dentin Micro-Shear Bond Strength, Dental Research Journal (2016)
5. Effect of Mtad on the Shear Bond Strength of Self-Etch Adhesives to Dentin, Dental Research Journal (2012)
6. Effect of Thermocycling and Water Storage on Bond Longevity of Two Self-Etch Adhesives, General Dentistry (2013)
7. Comparative Evaluation of Microtensile Bond Strength of Four Glass-Containing Materials With Primary Teeth Dentin, Iranian Journal of Pediatrics (2019)
8. Effect of Desensitizer Application on Shear Bond Strength of Composite Resin to Bleached Enamel, Indian Journal of Dental Research (2013)
Experts (# of related papers)
View all Related Experts
Farzaneh Shirani (16)
Atiyeh Feiz (14)
Other Related Docs
9. Evaluation of Microleakage in Resin Composites Bonded to an Er:Yag Laser and Bur-Prepared Root and Coronal Dentin Using Different Bonding Agents, Journal of Lasers in Medical Sciences (2021)
10. The Effect of Application of Sonic Vibration on the Bond Strength of Glass Fiber Post to Root Dentin Using Duo-Link and Theracem Cements: An in Vitro Study, Dental Hypotheses (2022)
11. Histologic Evaluation of Human Pulp Response to Total Etch and Self Etch Adhesive Systems, Iranian Red Crescent Medical Journal (2013)
12. The Effect of Trichloracetic Acid As a Hemostatic and Etching Agent on the Morphological Characteristics and Shear Bond Strength of Resin Composite to Enamel, Operative Dentistry (2010)
13. To Compare the Microleakage Among Experimental Adhesives Containing Nanoclay Fillers After the Storages of 24 Hours and 6 Months, Open Dentistry Journal (2011)
14. A New Solvent-Free One-Step Self-Etch Adhesive: Bond Strength to Tooth Structures, Journal of Contemporary Dental Practice (2013)
15. In-Vitro Comparison of the Effect of Different Bonding Strategies on the Micro-Shear Bond Strength of a Silorane-Based Composite Resin to Dentin, Dental Research Journal (2016)
16. Comparison of Shear Bond Strength of Rebonded Stainless Steel Brackets With Three Different Enamel Surface Conditioning Methods, Dental Research Journal (2023)
17. Effect of Postbleaching Application of an Antioxidant on Enamel Bond Strength of Three Different Adhesives, Medicina Oral, Patologia Oral y Cirugia Bucal (2011)
18. Effect of Root Canal Rinsing Protocol on Dentin Bond Strength of Two Resin Cements Using Three Different Method of Test, Journal of Clinical and Experimental Dentistry (2016)
19. Effect of Dentin Dehydration and Composite Resin Polymerization Mode on Bond Strength of Two Self-Etch Adhesives, Contemporary Clinical Dentistry (2016)
20. Influence of Filler Existence on Microleakage of a Self-Etch Adhesive System, Journal of Conservative Dentistry (2014)
21. Effect of Storage Environment on the Bond Strength of Reattachment of Crown Fragments to Fractured Teeth, Journal of Conservative Dentistry (2011)
22. Impact of Silver Diamine Fluoride on Composite Resin Bond Strength: An in Vitro Study With Various Adhesive Systems, Heliyon (2025)
23. Effects of Ethanol Concentrations of Acrylate Based Dental Adhesives on Microtensile Composite Dentin Bond Strength and Hybrid Layer Structure of a 10 Wt% Polyhedral Oligomeric Silsesquioxane (Poss) Incorporated Bonding Agent, Dental Research Journal (2018)
24. Shear Bond Strengths and Morphological Evaluation of Filled and Unfilled Adhesive Interfaces to Enamel and Dentine, International Journal of Dentistry (2012)
25. Bond Strength Evaluation of Ceramic Restorations With Immediate Dentin Sealing: A Systematic Review and Meta-Analysis, Journal of Dentistry (Iran) (2024)
26. Effect of Bioactive Glass‑Containing Dentin Adhesives on Microshear Bond Strength of Composite Restorations, Dental Research Journal (2023)
27. Adhesion to Er:Yag Laser and Bur Prepared Root and Crown Dentine, Australian Dental Journal (2012)
28. Comparison of Shear Bond Strength and Enamel Surface Changing Between the Two-Step Etching and Primer and Self-Etch Primer Methods in Rebonding of Orthodontic Brackets: An in Vitro Study, Dental Research Journal (2019)
29. Enhancing Adhesive Performance With N, N, N', N'-Tetrakis (2-Pyridyl Methyl) Ethylenediamine Matrix Metalloproteinase Inhibitors: A Comprehensive Study of Degree of Conversion, Microleakage, and Micro-Tensile Bond Strength in Dental Adhesives, Journal of Conservative Dentistry and Endodontics (2025)
30. Evaluation of the Effect of Anti-Covid-19 Mouthwashes on Shear Bond Strength of Composite Resin Restorations to Dentin and Enamel: An in Vitro Study, BioMed Research International (2022)
31. Effect of Different Surface Treatment With Panaviav5 on Shear Bond Strength of Metal Brackets to Silver Amalgam, Dental Research Journal (2021)
32. Comparison of Microleakage of Composite Restorations Using Fifth and Sixth Generation Dentin Bonding Agent: An in Vivo Study, Journal of Contemporary Dental Practice (2012)
33. Interfacial Fracture Toughness of Universal Adhesive Systems Treated With an Antioxidant, Journal of Clinical and Experimental Dentistry (2018)
34. Poly(Acrylic Acid) Grafted Montmorillonite As Novel Fillers for Dental Adhesives: Synthesis, Characterization and Properties of the Adhesive, Dental Materials (2012)
35. Effect of Pre-Etching on Sealing Ability of Two Current Self-Etching Adhesives, Journal of Research in Medical Sciences (2005)
36. In Vitro Study of Microleakage of Different Techniques of Surface Preparation Used in Pits and Fissures, Indian Journal of Dental Research (2012)
37. Effect of Different Chemical Disinfectants on the Flexural Strength of Heat-Polymerized Acrylic Resins, The European journal of prosthodontics and restorative dentistry (2013)
38. Effects of Rinsing Water Temperature and Preheated Composites on Microleakage of Composite Restorations With Two Bonding Agents, Frontiers in Dentistry (2022)
39. A Comparative Study of Cervical Composite Restorations Microleakage Using Dental Universal Bonding and Two-Step Self-Etch Adhesive, Journal of Contemporary Dental Practice (2021)
40. Effect of Prewarming And/Or Delayed Light Activation on Resin-Modified Glass Ionomer Bond Strength to Tooth Structures, Operative Dentistry (2012)
41. Effect of Different Protective Bases on Ph Changes and Hydrogen Peroxide Microleakage During Intracoronal Bleaching, Frontiers in Dentistry (2023)
42. Resin Bonding Using Etch-And-Rinse and Self-Etch Adhesives to Decalcified Deciduous Enamel After Bioactive Glass Air Abrasion, The journal of contemporary dental practice (2014)
43. Effects of Post Surface Conditioning Before Silanization on Bond Strength Between Fiber Post and Resin Cement, Journal of Advanced Prosthodontics (2013)
44. A 12-Month Clinical Evaluation of Pit-And-Fissure Sealants Placed With and Without Etch-And-Rinse and Self-Etch Adhesive Systems in Newly-Erupted Teeth, Journal of Applied Oral Science (2012)
45. The Effect of Denture Adhesive on the Efficiency of Complete Denture in Patients With Different Alveolar Ridges, Dental Research Journal (2018)
46. Bond Strength of Composite Resin to White Mineral Trioxide Aggregate: Effect of Different Surface Treatments, Journal of Conservative Dentistry (2018)
47. Effect of Adhesive Resin As a Modeling Liquid on Elution of Resin Composite Restorations, International Journal of Dentistry (2021)
48. The Effect of Acrylate-Based Dental Adhesive Solvent Content on Microleakage in Composite Restorations, Dental Research Journal (2016)
49. Effect of Surface Treatments on Fracture Resistance of Root Filled Teeth With Bonded Fibre Posts, Dental Traumatology (2014)
50. The Effect of Silver Diamine Fluoride on the Bond Strength of Glass Ionomer to the Enamel of Primary Teeth, Dental Research Journal (2023)