Soft Tissue Simulant Materials in X-Ray-Based Imaging in Dentomaxillofacial Radiology: A Scoping Review Publisher Pubmed



Soltani P^{1, 2} ; Devlin H^{3, 4} ; Aydin U⁵ ; Tafti KT⁶ ; Baghaei K⁶ Show Affiliations
Source: Oral Radiology Published:2024

Abstract

Introduction: In in-vitro dental radiographic research, simulation of soft tissue is required to replicate the clinical condition as close as possible. This study aimed to find out which soft tissue simulation material have been studied to use in dentomaxillofacial radiology and showed similarity in radiodensity to the soft tissues of the maxillofacial region. Methods: In this scoping review, Web of Science, Embase, Scopus, Google scholar and PubMed databases were searched on April 9, 2023, considering the following PICOS: Population: soft tissue simulants, Intervention: X-ray-based imaging, Comparison: —, Outcome: properties of the soft tissue simulants, Study design: in-vitro studies. Screening, study selection, and data extraction were performed by two independent researchers. A third team member was consulted in the case of disagreement. Quality assessment of the included studies was made using Quality Assessment Tool For In-Vitro Studies (QUIN Tool). Results: Of the initial 1172 articles retrieved in the database search, 13 studies were included in the review. Seven studies had a low risk of bias. In 8 studies, computed tomography (CT) or cone beam computed tomography (CBCT), in 4 studies intraoral radiography, and in 2 studies panoramic radiography was used (one study has used CT/CBCT and panoramic radiography). The studies varied in the radiographic modality, acquisition parameters, selected outcomes, and gold standard. In the majority of the studies (n = 10, 77%), acrylic resin derivatives were used in the soft tissue simulant formula alone or as a major component. Wax was used in the simulant material in 8 studies (62%). In addition, in 3 studies (23%) ice/water was used as the main simulant. Conclusion: Ballistic gelatin, expanded 2-cm thick polystyrene with or without 1-cm utility wax, and 0.5 cm of acrylic resin were shown to have a radiographic density similar to soft tissue in standardized studies employing CBCT scanning. For intraoral radiographs, using self-polymerizing acrylic resin, utility wax, and wood, as well as a polymethylmethacrylate box filled with water in thicknesses ranging from 4 to 45 mm, provides suitable radiographic contrast. However, for 4 and 8 mm of wax and 4 mm of water, the radiographic contrast is not appropriate. In addition, 13–17 mm wax and 14.5 mm acrylic resin showed acceptable soft tissue densities in intraoral radiography. Further studies using different imaging modalities with standardized conditions and objective metrics are required to confirm the most appropriate soft tissue simulant material for in-vitro dental radiographic research. © The Author(s) under exclusive licence to Japanese Society for Oral and Maxillofacial Radiology 2023.