Isfahan University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Share this content! On (X network) By
Biofiltration of Formaldehyde, Acetaldehyde, and Acrolein From Polluted Airstreams Using a Biofilter Publisher



Jamshidi A1 ; Hajizadeh Y2, 3 ; Amin MM2, 3 ; Kiani G4 ; Haidari R5 ; Falahinejad K6 ; Parseh I4
Authors
Show Affiliations
Authors Affiliations
  1. 1. Department of Environmental Health Engineering, School of Health, Yasuj University of Medical Sciences, Yasuj, Iran
  2. 2. Environment Research Center, Research Institute for Primordial Prevention of Non-communicable disease, and Department of Environmental Health Engineering, School of Health, Isfahan University of Medical Sciences, Isfahan, Iran
  3. 3. Environment Research Center, Research Institute for Primordial Prevention of Non-communicable disease, and Department of Environmental Health Engineering, School of Health, Isfahan University of Medical Sciences, Isfahan, Iran
  4. 4. Student Research Committee and Department of Environmental Health Engineering, School of Health, Isfahan University of Medical Sciences, Isfahan, Iran
  5. 5. HSE expert of Oil Industries Commissioning and Operation (OICO) Company, Iran
  6. 6. Department of Environmental Management, Islamic Azad University, Ahvaz, Iran

Source: Journal of Chemical Technology and Biotechnology Published:2018


Abstract

BACKGROUND: Aldehydes inhalation can adversely affect human and environmental health. This study was carried out to investigate the removal efficiency (RE) of three aldehydes including formaldehyde (FA), acetaldehyde (ACT), and acrolein (ACR) from airstreams using a biofilter packed with a new mixture of compost-scoria-sugarcane bagasse. Influence of inlet concentrations (0.63–25.15 mg/m3), empty bed residence time (EBRT) (40, 80, and 120 s), and bed height on the biofilter efficiency were measured for three separate 90-day periods. RESULTS: The mean RE of FA, ACT, and ACR were 92.6 ± 4.6, 85.3 ± 6.2, and 86.3 ± 5.7%, respectively. The mean RE at EBRTs of 40, 80, and 120 s was 84.9 ± 6.1, 87.9 ± 6.2, and 91.4 ± 5.1%, respectively. Results showed that the RE decreased with increasing inlet concentration, so that the minimum RE (80.2 ± 4.7%) was observed at the inlet concentration of 78.5–25.15 mg m-3. Also, more than 68% of the overall RE occurred in section 1 of the biofilter, where the mean bacterial population (7.51 log10CFU g-1) was higher than that in section 2 (7.02 log10CFU g-1). CONCLUSIONS: Owing to the high RE and negligible pressure drop of the bed, it can be concluded that a biofilter with the same conditions is a satisfactory technique to remove aldehydes from polluted air. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry
Other Related Docs
15. Evaluation of Flat Sheet Membrane Bioreactor Efficiency for Municipal Wastewater Treatment, International Journal of Environmental Health Engineering (2012)
17. Biological Excess Sludge Reduction in Adsorption/Bio-Oxidation Process by Enhancing Predators' Growth, International Journal of Environmental Health Engineering (2020)
26. Activated Carbon Production From Rdf and Its Use for Dioxin Removal From Flue Gas of Waste Incinerators, International Journal of Environmental Health Engineering (2012)
27. Crotonaldehyde Removal From Polluted Air Using a Biofilter Packed With a Mixed Bed, Journal of Industrial and Engineering Chemistry (2018)
29. Comparison of the Biological Nh3 Removal Characteristics of a Three Stage Biofilter With a One Stage Biofilter, International Journal of Environmental Science and Technology (2006)