Isfahan University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Share this content! On (X network) By
Evaluation of Light Curing Distance and Mylar Strips Color on Surface Hardness of Two Different Dental Composite Resins Publisher



Mousavinasab SM1 ; Barekatain M2 ; Sadeghi E3 ; Nourbakhshian F4 ; Davoudi A4
Authors
Show Affiliations
Authors Affiliations
  1. 1. Restorative Dentistry Department, Torabinejad Dental Research Center and Dental Materials Research Center, School of Dentistry, Isfahan University of Medical Sciences and Islamic Azad University (Khorasgan branch), Isfahan, Iran
  2. 2. Restorative Dentistry Department, Islamic Azad University (Khorasgan branch), Isfahan, Iran
  3. 3. Islamic Azad University (Khorasgan branch), Isfahan, Iran
  4. 4. School of Dentistry, Isfahan University of Medical Sciences, Isfahan, Iran

Source: Open Dentistry Journal Published:2014


Abstract

Introduction: Hardness is one of the basic properties of dental materials, specially composite resins which is relevant to their polymerization. The aim of this study was to evaluate the effect of light curing distance and the color of clear Mylar strips on surface hardness of Silorane-based (SCR) and Methacrylate-based composite resins (MCR). Materials and methods: 40 samples of MCRs (Filtek Z250) and SCRs (Filtek P90) were prepared in size of 5 mm×2 mm (80 samples in total). The samples divided into 8 groups (10 samples in each one) based on the color of clear Mylar strips (white or blue) and distance from light curing source (0 mm or 2 mm). All the samples cured for 40 second and stored in incubator for 24 hours in 37°C temperature. Surface hardness test was done by Vickers test machine and the collected data were analyzed by one-way ANOVA and paired T-test by using SPSS software version 13 at significant level of 0.05. Results: MCRs cured with blue Mylar strips from 0 mm distance had the highest (114.5 kg/mm2) and SCRs cured with white Mylar strips from 2 mm distance had the lowest (42.2 kg/mm2) mean of surface hardness. Also, the results of comparison among SCRs and MCRs showed significant differences among all groups (all P values <0.01). Conclusion: The hardness decreased as the distance increased and the blue Mylar strips provided higher hardness than clear ones. Also, Filtek Z250 showed higher hardness compared to Filtek P90. © Mousavinasab et al.
Related Docs
View other Related Docs
1. The Effect of Acrylate-Based Dental Adhesive Solvent Content on Microleakage in Composite Restorations, Dental Research Journal (2016)
2. Comparison of Microleakage in Class Ii Cavities Restored With Silorane-Based and Methacrylate-Based Composite Resins Using Different Restorative Techniques Over Time, Dental Research Journal (2015)
3. Effects of Rinsing Water Temperature and Preheated Composites on Microleakage of Composite Restorations With Two Bonding Agents, Frontiers in Dentistry (2022)
4. Effect of Prewarming And/Or Delayed Light Activation on Resin-Modified Glass Ionomer Bond Strength to Tooth Structures, Operative Dentistry (2012)
5. The Effect of Washing Water Temperature on Resin-Dentin Micro-Shear Bond Strength, Dental Research Journal (2016)
6. Effect of Desensitizer Application on Shear Bond Strength of Composite Resin to Bleached Enamel, Indian Journal of Dental Research (2013)
7. Comparison of Color Stability and Fracture Resistance of Two Temporary Fiber-Reinforced Fixed Partial Denture Materials, Dental Research Journal (2019)
8. Effect of Two Whitening Toothpastes on Composite Resin Restorations Discolored by 0.2% Chlorhexidine Mouthwash, Frontiers in Dentistry (2022)
Experts (# of related papers)
View all Related Experts
Pouran Samimi (11)
Atiyeh Feiz (10)
Other Related Docs
9. Effect of Ceramic Thickness on the Polymerization Quality and Film Thickness of Dual-Polymerizing Versus Heated Light-Polymerizing Adhesive Cement, Journal of Prosthetic Dentistry (2024)
10. Comparison of Immediate and Delayed Light-Curing on Nano-Indentation Creep and Contraction Stress of Dual-Cured Resin Cements, Journal of the Mechanical Behavior of Biomedical Materials (2016)
11. In-Vitro Comparison of the Effect of Different Bonding Strategies on the Micro-Shear Bond Strength of a Silorane-Based Composite Resin to Dentin, Dental Research Journal (2016)
12. Marginal Integrity of Low-Shrinkage and Methacrylate-Based Composite Resins: Effect of Three Different Hemostatic Agents, Journal of Clinical and Experimental Dentistry (2016)
13. Thermal Rise During Photopolymerization and Degree of Conversion of Bulk Fill and Conventional Resin Composites, Dental Research Journal (2020)
14. Comparison of Color Stability of Two Resin Composites in Blood Area, Dental Hypotheses (2017)
15. Effect of Three Nanobiomaterials on the Surface Roughness of Bleached Enamel, Contemporary Clinical Dentistry (2015)
16. Effect of Dentin Dehydration and Composite Resin Polymerization Mode on Bond Strength of Two Self-Etch Adhesives, Contemporary Clinical Dentistry (2016)
17. Shear Bond Strengths and Morphological Evaluation of Filled and Unfilled Adhesive Interfaces to Enamel and Dentine, International Journal of Dentistry (2012)
18. Porcelain Color Alteration After Orthodontic Bonding Using Three Different Surface Preparation Methods, Dental Research Journal (2018)
19. Efficacy of Diode Laser Irradiation During Dental Bleaching in Preventing Enamel Damage Caused by Bleaching, Dental Research Journal (2018)
20. Marginal Gap, Internal Fit, and Fracture Load of Leucite-Reinforced Ceramic Inlays Fabricated by Cerec Inlab and Hot-Pressed Techniques, Journal of Prosthodontics (2011)
21. Effects of Post Surface Conditioning Before Silanization on Bond Strength Between Fiber Post and Resin Cement, Journal of Advanced Prosthodontics (2013)
22. Comparison of Shear Bond Strength and Enamel Surface Changing Between the Two-Step Etching and Primer and Self-Etch Primer Methods in Rebonding of Orthodontic Brackets: An in Vitro Study, Dental Research Journal (2019)
23. Comparative Evaluation of Effects of Different Surface Treatment Methods on Bond Strength Between Fiber Post and Composite Core, Journal of Advanced Prosthodontics (2012)
24. The Effect of Time and Storage Environment on Dimensional Changes of Acrylic Resin Post Patterns, Open Dentistry Journal (2015)
25. Effect of Phosphoric Acid Etching of Enamel Margins on the Microleakage of a Simplified All-In-One and a Self-Etch Adhesive System, Operative Dentistry (2009)
26. Effects of Debonding of Orthodontic Brackets on Topography and Surface Roughness of Composite Restorations, International Orthodontics (2018)
27. Resin Bonding Using Etch-And-Rinse and Self-Etch Adhesives to Decalcified Deciduous Enamel After Bioactive Glass Air Abrasion, The journal of contemporary dental practice (2014)
28. Evaluation of the Apical Microleakage of Mta Fillapex, Ah26, and Endofill Sealers; [Avaliacao Da Microinfiltracao Apical De Cimentos Mta Fillapex Ah26 E Endofill], Brazilian Dental Science (2020)
29. Influence of Intracanal Irrigants on Coronal Fracture Resistance of Endodontically Treated and Bleached Teeth: An in Vitro Study, Contemporary Clinical Dentistry (2017)
30. Effects of Number of Firings and Veneer Thickness on the Color and Translucency of 2 Different Zirconia-Based Ceramic Systems, Journal of Prosthetic Dentistry (2019)
31. Effect of Fluoride Dentifrices on the Microhardness of Deciduous Enamel Surfaces, Oral Health and Preventive Dentistry (2012)
32. Adhesion to Er:Yag Laser and Bur Prepared Root and Crown Dentine, Australian Dental Journal (2012)
33. Mechanical and Dentin Bond Strength Properties of the Nanosilver Enriched Glass Ionomer Cement, Journal of Clinical and Experimental Dentistry (2019)
34. Effect of Several Bleaching Agents on Teeth Stained With a Resin-Based Sealer, International Endodontic Journal (2014)
35. The Effect of Intraorifice Barriers (Theracal Lc, Lime-Lite and Ionoseal) on the Fracture Resistance and Failure Patterns of Endodontically Treated Teeth Submitted to Intracoronal Bleaching, Dental Research Journal (2023)
36. Effect of Bioactive Glass‑Containing Dentin Adhesives on Microshear Bond Strength of Composite Restorations, Dental Research Journal (2023)
37. Bond Strength Evaluation of Ceramic Restorations With Immediate Dentin Sealing: A Systematic Review and Meta-Analysis, Journal of Dentistry (Iran) (2024)
38. Effects of Ethanol Concentrations of Acrylate Based Dental Adhesives on Microtensile Composite Dentin Bond Strength and Hybrid Layer Structure of a 10 Wt% Polyhedral Oligomeric Silsesquioxane (Poss) Incorporated Bonding Agent, Dental Research Journal (2018)
39. Fracture Toughness of Bleached Enamel: Effect of Applying Three Different Nanobiomaterials by Nanoindentation Test, Contemporary Clinical Dentistry (2016)
40. Resin-Based Ceramic Matrix Composite Materials in Dentistry, Advances in Ceramic Matrix Composites (2014)
41. Effect of Polishing and Universal Bonding Application on Mercury Release From Aged Amalgam After Exposure to Bleaching Agents, Frontiers in Dentistry (2024)
42. Effect of Resin-Modified Glass Ionomer Containing Bioactive Glass on the Flexural Strength and Morphology of Demineralized Dentin., Operative dentistry (2013)
43. Prevention and Treatment of White Spot Lesions in Orthodontic Patients, Contemporary Clinical Dentistry (2017)
44. A Comparative Study of Cervical Composite Restorations Microleakage Using Dental Universal Bonding and Two-Step Self-Etch Adhesive, Journal of Contemporary Dental Practice (2021)
45. Evaluation of Flexural Strength of Denture-Based Materials Reinforced With Al2o3, Sio2, Tio2, and Zro2 Nanoparticles: A Systematic Review and Meta-Analysis, Gomal Journal of Medical Sciences (2023)
46. A Comparative Study of Fracture Resistance of Endodontically Treated Compromised Teeth With Different Post Systems: An in Vitro Study, Open Dentistry Journal (2023)
47. Effect of the Processing Cycle on Dimensional Changes of Heat-Polymerized Denture Base Resins, Dental Research Journal (2015)
48. Effect of Addition of Bioactive Glass to Resin Modified Glass Ionomer Cement on Enamel Demineralization Under Orthodontic Brackets, Journal of Clinical and Experimental Dentistry (2019)
49. Innovations in Bonding to Zirconia Based Ceramics: Part Iii. Phosphate Monomer Resin Cements, Dental Materials (2010)
50. Comparison of Mta, Cem Cement, and Biodentine As Coronal Plug During Internal Bleaching: An in Vitro Study, International Journal of Dentistry (2020)