Isfahan University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Share this content! On (X network) By
Finite Element Analysis of the Influence of Implant Inclination on Stress Distribution in Mandibular Overdentures Publisher Pubmed



Ebadian B1 ; Mosharraf R2 ; Khodaeian N2
Authors
Show Affiliations
Authors Affiliations
  1. 1. Torabinejad Dental Implant Research Center, Department of Prosthodontics, Isfahan University of Medical Sciences, Isfahan, Iran
  2. 2. Torabinejad Dental Material Research Center, Department of Prosthodontics, Isfahan University of Medical Sciences, Isfahan, Iran

Source: Journal of Oral Implantology Published:2015


Abstract

The purpose of this finite element study was to evaluate the influence of implant inclination on the stress pattern in the bone surrounding the implants that support mandibular overdentures. The models used in this study were 3-implant-supported mandibular overdentures with a bar-and-clip attachment system. Each model was modified according to the distal implant inclination (0 and 20°). A unilateral vertical load was applied unilaterally to the first molar and first premolar of the overdenture, and the stress distribution in the bone was analyzed. Implant inclination decreased the stress distribution pattern in bone surrounding the implants when the load was applied on the molar site, but when applied at the premolar site, similar stress value changes were not found. Within the limitation of this study, it seems that the inclination of splinted implants in mandibular overdentures does not have any adverse effect on stress distribution pattern values around the implant. © 2015, Allen Press Inc. All rights reserved.
Related Docs
View other Related Docs
1. Effect of Cantilever Length on Stress Distribution Around Implants in Mandibular Overdentures Supported by Two and Three Implants, European Journal of Dentistry (2016)
2. Stress Analysis of Mandibular Implant-Retained Overdenture With Independent Attachment System: Effect of Restoration Space and Attachment Height, General Dentistry (2015)
3. The Effect of Implant Angulation and Splinting on Stress Distribution in Implant Body and Supporting Bone: A Finite Element Analysis, European Journal of Dentistry (2015)
4. Stress Analysis of Ball and Locator Attachments and Bone in Overdenture Supported by Tissue Level and Bone Level Implants: A Three-Dimensional Finite Element Analysis, Journal of International Oral Health (2016)
5. Retention of Implant-Supported Overdenture With Bar/Clip and Stud Attachment Designs, Journal of Oral Implantology (2013)
6. Implant-Retained Mandibular Bar-Supported Overlay Dentures: A Finite Element Stress Analysis of Four Different Bar Heights, Journal of Oral Implantology (2012)
7. Stress Analysis of Different Prosthesis Materials in Implant-Supported Fixed Dental Prosthesis Using 3D Finite Element Method, Dental Hypotheses (2014)
8. Effect of Type of Luting Agents on Stress Distribution in the Bone Surrounding Implants Supporting a Three-Unit Fixed Dental Prosthesis: 3D Finite Element Analysis, Dental Research Journal (2015)
Experts (# of related papers)
View all Related Experts
Mansour Rismanchian (17)
Amirhossein Fathi (13)
Other Related Docs
9. Stress Analysis of Endodontically Treated Tooth-Implant Different Connectors Designs in Maxillary Posterior Region: A Finite Element Analysis, European Journal of Dentistry (2024)
10. The Effect of Abutment Angulation and Crown Material Compositions on Stress Distribution in 3-Unit Fixed Implant-Supported Prostheses: A Finite Element Analysis, International Journal of Dentistry (2022)
11. The Effect of Placement Depth of Platform-Switched Implants on Periimplant Cortical Bone Stress: A 3-Dimensional Finite Element Analysis, Implant Dentistry (2013)
12. Effect of Shape and Design of the Internal Connection of Tissue-Level and Bone-Level Implants on Detorque Values and Removal Forces: An in Vitro Study, Journal of Prosthetic Dentistry (2024)
13. The Effects of Splinting Periodontally Compromised Removable Partial Denture Abutments on Bone Stresses: A Three-Dimensional Finite Element Study, Journal of Dental Sciences (2010)
14. Effect of Macro-Design of Immediately Loaded Implants on Micromotion and Stress Distribution in Surrounding Bone Using Finite Element Analysis, Implant Dentistry (2009)
15. Micromotion and Stress Distribution of Immediate Loaded Implants: A Finite Element Analysis, Clinical Implant Dentistry and Related Research (2009)
16. Comparison of Full-Arch Mandibular Reconstruction With Dental Implants Using Completely Splinted or Segmentally Splinted Prostheses With Two Different Occlusal Schemes: A Finite-Element Analysis, Journal of Prosthodontics (2024)
17. How the Initial Retentive Force of Implant‑Supported Overdentures Can Be Affected With Splinted and Unsplinted Attachments Systems, Dental Research Journal (2021)
18. Comparison of Stress and Strain Distribution Patterns in Canine Implant and Maxillary Bone in Three Occlusal Schemes Using Finite Element Analysis, European Journal of Dentistry (2024)
19. The Correlation of Clinical Outcomes (Marginal Bone Loss, Probing Depth, and Patient Satisfaction) With Different Prosthetic Aspects of Implant Overdentures: A Five-Year Retrospective Cohort Study, Journal of Oral Implantology (2020)
20. Evaluation of the Three-Dimensional Accuracy of Implant Impression Techniques in Two Simulated Clinical Conditions by Optical Scanning, International Journal of Oral and Maxillofacial Implants (2015)
21. Dental Implants Immediate Loading Versus the Standard 2-Staged Protocol: An Experimental Study in Dogs, Journal of Oral Implantology (2012)
22. Finite Element Method Analysis of Stress Distribution to Supporting Tissues in a Class Iv Aramany Removable Partial Denture (Part Ii: Bone and Mucosal Membrane), Journal of Contemporary Dental Practice (2008)
23. Stability of Implant-Abutment Connection in Three Different Systems After Fatigue Test, Journal of Indian Prosthodontic Society (2022)
24. Effect of Different Impression Materials and Techniques on the Dimensional Accuracy of Implant Definitive Casts, Dental Research Journal (2015)
25. Assessment of the Relationship Between Maximum Occlusal Force and Median Mandibular Flexure in Adults: A Clinical Trial Study, Journal of Indian Prosthodontic Society (2020)
26. Applicability of Cone Beam Computed Tomography Gray Values for Estimation of Primary Stability of Dental Implants; [Aplicabilidade Dos Valores De Cinza Da Tomografia Computadorizada De Feixe Conico Na Estimativa Da Estabilidade Primaria De Implantes Dentarios], Brazilian Dental Science (2021)
27. Investigating the Effect of Nonrigid Connectors on the Success of Tooth-And-Implant-Supported Fixed Partial Prostheses in Maxillary Anterior Region: A Finite Element Analysis (Fea), International Journal of Dentistry (2021)
28. Clinical Performance of Implant Supported Mandibular Overdentures With Cantilever Bar and Stud Attachments: A Retrospective Study, Clinical Implant Dentistry and Related Research (2022)
29. Effects of Thread Shape on Strength and Stability of Dental Miniscrews Against Orthodontic Forces, Procedia Manufacturing (2019)
30. Panoramic-Based Radiographic Indices As Indicators of Bone Mineral Density at the Lumbar Spine; [Wskazniki Wyznaczane Na Zdjeciach Pantomograficznych Jako Parametry Gestosci Kosci Czesci Ledzwiowej Kregoslupa], Dental and Medical Problems (2015)
31. The Effects of Implant Design, Bone Quality, and Insertion Process on Primary Stability of Dental Implants: An In-Vitro Study, International Journal of Biomedical Engineering and Technology (2020)
32. Comparison of the Accuracy of Open-Tray and Snap-On Impression Techniques of Implants With Different Angulations, Dental Research Journal (2019)
33. Long-Term Clinical Outcomes of Single Crowns or Short Fixed Partial Dentures Supported by Short (≤6 Mm) Dental Implants: A Systematic Review, European Journal of Dentistry (2024)
34. The Effect of Ferrule/Crown Ratio and Post Length on the Applied Stress and Strain Distribution to the Endodontically Treated Maxillary Central Teeth: A Finite Element Analysis, Frontiers in Dentistry (2023)
35. Buckling Analysis of a Functionally Graded Implant Model for Treatment of Bone Fractures: A Numerical Study, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (2017)
36. One-Year Clinical and Radiographic Assessment of Fluoride-Enhanced Implants on Immediate Non-Functional Loading in Posterior Maxilla and Mandible: A Pilot Prospective Clinical Series Study, Clinical Oral Implants Research (2011)
37. Significance of the Width of Keratinized Mucosa on the Health Status of the Supporting Tissue Around Implants Supporting Overdentures., The Journal of oral implantology (2009)
38. Comparison of the Outcomes and Complications of Three-Unit Porcelain-Fused-To-Metal Tooth-Implant-Supported Prostheses With Implant-Supported Prostheses: A Systematic Review and Meta-Analysis, Dental Research Journal (2023)
39. Does the Crown-Implant Ratio Affect the Survival and Complications of Implant-Supported Prostheses? a Systematic Review, Journal of Prosthetic Dentistry (2024)
40. Effects of Impression Coping Design, Impression Technique, and Dental Undercuts on the Accuracy of Implant Impressions Assessed by 3-Dimensional Optical Scanning: An in Vitro Study, Implant Dentistry (2016)
41. Flexural Strength of Interim Resin Materials for Fixed Prosthodontics, Journal of Prosthodontics (2009)
42. Average Annual Crestal Bone Loss of Iti Implants Following the First Year of Loading, Journal of Research in Medical Sciences (2006)
43. A Comparative Study of Fracture Resistance of Endodontically Treated Compromised Teeth With Different Post Systems: An in Vitro Study, Open Dentistry Journal (2023)
44. Bone Loss-Related Factors in Tissue and Bone Level Dental Implants: A Systematic Review of Clinical Trials, Journal of the Korean Association of Oral and Maxillofacial Surgeons (2021)
45. Effects of Immediate Orthodontic and Orthopedic Forces on Peri-Miniscrew Bones: Histomorphologic and Histomorphometric Assessment in Dogs, International Journal of Dentistry (2012)
46. Investigation of Peri-Implant Bone Healing Using Autologous Plasma Rich in Growth Factors in the Canine Mandible After 12 Weeks: A Pilot Study, Open Dentistry Journal (2011)
47. Comparative Evaluation of the Effect of Core Type and Antirotational Post on Stress Distribution in an Endodontically Treated Maxillary First Molar: Fea, International Journal of Dentistry (2022)
48. Functional Treatment of Skeletal Class Ii Malocclusion Using Bone-Anchored Devices and Intermaxillary Elastics, Dental Hypotheses (2015)
49. Clinical Outcomes of Dental Implants Placed in the Augmented Maxillary Sinus:A 5‑Year Retrospective Study, Dental Research Journal (2025)
50. Comparison of the Effect of Four Different Abutment Screw Torques on Screw Loosening in Single Implant-Supported Prosthesis After the Application of Mechanical Loading, International Journal of Dentistry (2021)