Tehran University of Medical Sciences

Science Communicator Platform

Faculty Members have conducted research related to the Comparison of the Effect of Different Bleaching Regimes of Carbamide Peroxide on Wear of Z250 Composite
Safoura Ghodsi
Safoura Ghodsi

Associate Professor of Prosthodontics

Department Dental Prosthesis

School of Dentistry

Tehran University of Medical Sciences

All Documents
1. Abutment Connection Structural Changes in Dual-Retained and Screw-Retained Metal-Ceramic Implant-Supported Restorations: An in Vitro Study, Part I, BMC Oral Health (2025)
2. Are There Clinical Differences Between 3D-Printed and Milled Complete Dentures? a Systematic Review and Meta-Analysis, International Dental Journal (2025)
3. Are There Clinical Differences Between 3D-Printed and Milled Complete Dentures? a Systematic Review and Meta-Analysis, International Dental Journal (2025)
4. Can Fiber Placement Influence the Fracture Resistance of Endodontically Treated Teeth With Indirect Partial Ceramic Restorations? a Systematic Review and Meta-Analysis, Journal of Prosthetic Dentistry (2025)
5. Do 3D Printed and Milled Tooth-Supported Complete Monolithic Zirconia Crowns Differ in Accuracy and Fit? a Systematic Review and Meta-Analysis of in Vitro Studies, Journal of Prosthetic Dentistry (2025)
6. Do 3D-Printed and Milled Denture Bases Differ in Microbial Activity and Adhesion? a Systematic Review and Meta-Analysis, International Dental Journal (2025)
7. Do 3D-Printed and Milled Denture Bases Differ in Microbial Activity and Adhesion? a Systematic Review and Meta-Analysis, International Dental Journal (2025)
8. Effect of Occlusal Scheme and Bone-Level Implant Number and Position on Stress Distribution in Kennedy Class Ii Implant-Assisted Removable Partial Dentures: A 3D Finite Element Analysis, Clinical and Experimental Dental Research (2025)
9. How Does the Bonding Strength of Reline Materials and Denture Teeth Vary Between 3D-Printed and Milled Complete Denture Bases? a Systematic Review and Meta-Analysis, Clinical and Experimental Dental Research (2025)
10. How Does the Bonding Strength of Reline Materials and Denture Teeth Vary Between 3D-Printed and Milled Complete Denture Bases? a Systematic Review and Meta-Analysis, Clinical and Experimental Dental Research (2025)
11. Response to Letter to the Editor on the Manuscript “Can Fiber Placement Influence the Fracture Resistance of Endodontically Treated Teeth With Indirect Partial Ceramic Restorations? a Systematic Review and Meta-Analysis”, Journal of Prosthetic Dentistry (2025)
12. Are There Clinical Differences Between 3D-Printed and Milled Complete Dentures? a Systematic Review and Meta-Analysis, International Dental Journal (2024)
13. The Effect of Adding Chitosan Nanoparticles on Different Properties of the Adhesive and High-Filled Composite Resin, International Journal of Adhesion and Adhesives (2024)
14. The Effect of Fabrication Procedures and Thermomechanical Loading on the Structural Properties of Screw-Retained Metal-Ceramic Implant Restorations: An in Vitro Study, Journal of Prosthodontics (2024)
15. Effect of Nonthermal Plasma on Shear Bond Strength of Translucent Zirconia in Layering Ceramic, International Journal of Dentistry (2023)
16. Effect of Pretreatment of Root Dentin Surface With Cold Atmospheric Plasma on Improving the Bond Strength of Fiber Post and Resin Cement: In Vitro Study, Clinical and Experimental Dental Research (2023)
17. Evaluation of Marginal and Internal Fit of Cad/Cam Endocrowns With Different Cavity Tapers, International Journal of Prosthodontics (2023)
18. Influence of Nonthermal Argon Plasma on the Micro-Shear Bond Strength Between Resin Cement and Translucent Zirconia, Journal of Conservative Dentistry (2023)
19. Resin Cement Selection for Different Types of Fixed Partial Coverage Restorations: A Narrative Systematic Review, Clinical and Experimental Dental Research (2023)
20. Resin Cement Selection for Different Types of Fixed Partial Coverage Restorations: A Narrative Systematic Review, Clinical and Experimental Dental Research (2023)
21. Comparing the Surface Behavior of Conventional and Cad-Cam Feldspathic Porcelains in the Face of Laser-Assisted Bleaching and Post-Bleach Polishing, Journal of Lasers in Medical Sciences (2022)
22. Comparison of Retention and Fracture Load of Endocrowns Made From Zirconia and Zirconium Lithium Silicate After Aging: An in Vitro Study, BMC Oral Health (2022)
23. Evaluating the Relation of Posterior Occlusal Plane to Ala-Tragal Line According to Age and Sex; [Оценка Отношения Задней Окклюзионной Плоскости К Алатрагальной Линии В Зависимости От Возраста И Пола], Folia Medica (2022)
24. Cement Selection Criteria for Full Coverage Restorations: A Comprehensive Review of Literature, Journal of Clinical and Experimental Dentistry (2021)
25. Comparison of Fracture Resistance and Failure Mode in Digitally Milled Restorations With Rapid Layering by Indirect Composite Resin: An in Vitro Study, International Journal of Oral and Maxillofacial Implants (2021)
26. Comparison of Marginal and Internal Adaptation in Endocrowns Milled From Translucent Zirconia and Zirconium Lithium Silicate, International Journal of Dentistry (2021)
27. Effect of Aging on Fracture Resistance and Torque Loss of Restorations Supported by Zirconia and Polyetheretherketone Abutments: An in Vitro Study, Journal of Prosthetic Dentistry (2021)
28. Evaluation of the Colour and Translucency Parameter of Conventional and Computer-Aided Design and Computer-Aided Manufacturing (Cad-Cam) Feldspathic Porcelains After Staining and Laser-Assisted Bleaching, Journal of Conservative Dentistry (2021)
29. Marginal Adaptation of Implant Prostheses Fabricated by Different Materials in Excessive Crown Height Space Before and After Veneering, Frontiers in Dentistry (2021)
30. Rehabilitation of a Deep Bite Patient With Worn Dentition Using Minimally Invasive Approach: A 3-Year Follow-Up, Clinical Case Reports (2021)
31. A Clinical Comparison of Digital and Conventional Impression Techniques Regarding Finish Line Locations and Impression Time, Journal of Esthetic and Restorative Dentistry (2020)
32. Comparison of Retention and Seating of Implant-Supported Hard and Soft Metal Copings, Frontiers in Dentistry (2020)
33. Comparison of the Efficacy of Platelet-Rich Fibrin and Bone Allograft for Alveolar Ridge Preservation After Tooth Extraction: A Clinical Trial, Frontiers in Dentistry (2020)
34. Evaluating the Effect of Different Combination of Impression and Pouring Materials on Marginal and Internal Adaptation of Zirconia Crowns; [Evaluacion Del Efecto De Diferentes Combinaciones De Materiales De Impresion Y Vertido En La Adaptacion Marginal E Interna De Las Coronas De Circonio.], Journal of Oral Research (2020)
35. Comparison of Marginal Adaptation of Different Implant-Supported Metal-Free Frameworks Before and After Cementation, International Journal of Prosthodontics (2019)
36. Marginal Discrepancy of Single Implant-Supported Metal Copings Fabricated by Various Cad/Cam and Conventional Techniques Using Different Materials, European Journal of Dentistry (2019)
37. The Effect of Milling Metal Versus Milling Wax on Implant Framework Retention and Adaptation, Journal of Prosthodontics (2019)
38. A Review on Translucent Zirconia, The European journal of prosthodontics and restorative dentistry (2018)
39. Assessment of Musculoskeletal Disorders in Iranian Dentists, Annals of Tropical Medicine and Public Health (2018)
40. Comparing Retention and Internal Adaptation of Different Implant-Supported, Metal-Free Frameworks, International Journal of Prosthodontics (2018)
41. Digital Versus Conventional Techniques for Pattern Fabrication of Implant-Supported Frameworks, European Journal of Dentistry (2018)
42. Introducing a Method to Facilitate Making Acrylic Resin Bars for Splinting Multiple Implant Impression Copings, World Journal of Dentistry (2018)
43. Revising Average Condylar Inclinations Using Electronic Pantograph Assessment: A Cross-Sectional Study, Dental Hypotheses (2018)
44. Effect of Sandblasting Angle and Distance on Biaxial Flexural Strength of Zirconia-Based Ceramics, Journal of Contemporary Dental Practice (2017)
45. Increased Bone Quantity Around an Ailing Implant in Esthetic Zone Using Progressive Bone Loading: A Case Report, Dental Hypotheses (2017)
46. Practical Guidelines for Fabricating Mandibular Guide Flange Prostheses: A New Technique for Measuring the Flange Angulation, Prosthetics and Orthotics International (2016)
47. Comparative Evaluation of Fracture Resistance and Mode of Failure of Zirconia and Titanium Abutments With Different Diameters, Journal of Contemporary Dental Practice (2015)
48. Evaluation of the Effect of a Home-Bleaching Agent on the Surface Characteristics of Indirect Esthetic Restorative Materials: Part I-Roughness, Journal of Contemporary Dental Practice (2015)