Corrigendum to “3D Printing of Complicated Gelma-Coated Alginate/Tri‑Calcium Silicate Scaffold for Accelerated Bone Regeneration” [Int. J. Biol. Macromol. 229 (2023) 636–653, (S0141813022031889), (10.1016/J.Ijbiomac.2022.12.267)] Publisher Pubmed



N Beheshtizadeh NIMA ; A Farzin ALI ; S Rezvantalab SIMA ; Z Pazhouhnia ZAHRA ; Nl Lotfibakhshaiesh Nasrin L ; J Ai JAFAR ; A Noori ALIREZA ; M Azami MAHMOUD
Source: International Journal of Biological Macromolecules Published:2025

Abstract

The authors regret that certain figures in the published paper were incorrectly arranged and labeled due to inadvertent errors during the figure preparation process. This corrigendum provides the necessary corrections, as detailed below: Specific corrections include: • Fig. 6c: Updated SEM image of 3D-printed Alg scaffolds with 10 wt% C₃S.• Fig. 8c: Revised live/dead images of GelMA-coated specimens (Day 2) for improved clarity.• Fig. 8e: Corrected SEM images where the GelMA-coated specimen and Alg-10 % C₃S specimen (scale bar: 50 μm) were inadvertently swapped. For transparency, the original SEM images (without cell highlighting) are provided to prevent misinterpretation.These corrections address the figure errors without impacting the study's conclusions, which remain fully supported by the data and analyses. The updates enhance the manuscript's accuracy while maintaining the original findings. The authors apologize for any inconvenience caused.[Figure presented][Figure presented] © 2025 Elsevier B.V., All rights reserved.