Tehran University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Share this content! On (X network) By
Development of a Model for Modulus of Polymer Halloysite Nanotube Nanocomposites by the Interphase Zones Around Dispersed and Networked Nanotubes Publisher Pubmed



Zare Y1 ; Rhee KY2
Authors
Show Affiliations
Authors Affiliations
  1. 1. Biomaterials and Tissue Engineering Research Group, Department of Interdisciplinary Technologies, Breast Cancer Research Center, Motamed Cancer Institute, ACECR, Tehran, Iran
  2. 2. Department of Mechanical Engineering (BK21 Four), College of Engineering, Kyung Hee University, 1 Seocheon, Giheung, Gyeonggi, Yongin, 449-701, South Korea

Source: Scientific Reports Published:2022


Abstract

Theoretical studies on the mechanical properties of halloysite nanotube (HNT)-based nanocomposites have neglected the HNT network and interphase section, despite the fact that the network and interphase have significant stiffening efficiencies. In the present study, the advanced Takayanagi equation for determining the modulus of nanocomposites is further developed by considering the interphase zones around the dispersed and networked HNTs above percolation onset. Furthermore, simple equations are provided to determine the percolation onset of HNTs and the volume portions of HNTs and interphase section in the network. The experimental values obtained for many samples and the assessments of all relevant factors validate the proposed model. The high ranges of HNT concentration, interphase depth, HNT modulus, HNT length, network modulus, interphase modulus, interphase concentration, and network fraction enhance the system modulus. However, the low levels of HNT radius, percolation onset, and matrix modulus can intensify the reinforcing effect. Notably, the moduli of the dispersed HNTs and the surrounding interphase negligibly affect the modulus of the samples. Moreover, HNTs cannot reinforce the polymer medium when the HNT volume fraction is lower than 0.01 and the interphase depth is less than 5 nm. © 2022, The Author(s).
Related Docs
View other Related Docs
1. An Applicable Model for the Modulus of Polymer Halloysite Nanotubes Samples by the Characteristics of Halloysite Nanotubes, Interphase Zone and Filler/Interphase Network, Colloids and Surfaces A: Physicochemical and Engineering Aspects (2021)
2. Expansion of Takayanagi Model by Interphase Characteristics and Filler Size to Approximate the Tensile Modulus of Halloysite-Nanotube-Filled System, Journal of Materials Research and Technology (2022)
3. Tensile Modulus of Polymer Halloysite Nanotube Systems Containing Filler–Interphase Networks for Biomedical Requests, Materials (2022)
4. A Modified Version of Conventional Halpin-Tsai Model for the Tensile Modulus of Polymer Halloysite Nanotube Nanocomposites by Filler Network and Nearby Interphase, Surfaces and Interfaces (2023)
5. A Simple Model for Determining the Strength of Polymer Halloysite Nanotube Systems, Composites Part B: Engineering (2021)
6. Simulation of Tensile Strength for Halloysite Nanotubes/Polymer Composites, Applied Clay Science (2021)
7. Crucial Interfacial Shear Strength to Consider an Imperfect Interphase in Halloysite-Nanotube-Filled Biomedical Samples, Journal of Materials Research and Technology (2022)
8. Percolation Onset and Electrical Conductivity for a Multiphase System Containing Carbon Nanotubes and Nanoclay, Journal of Materials Research and Technology (2021)
Other Related Docs
9. Progressing of Kovacs Model for Conductivity of Graphene-Filled Products by Total Contact Resistance and Actual Filler Amount, Engineering Science and Technology# an International Journal (2022)
10. The Strengthening Efficacy of Filler/Interphase Network in Polymer Halloysite Nanotubes System After Mechanical Percolation, Journal of Materials Research and Technology (2021)
11. A Two-Step Technique Established by Simple Models to Estimate the Tensile Strength of Halloysite Nanotubes-Filled Nanocomposites, Polymer Testing (2021)
12. A Novel Technique Including Two Steps for Modulus Prediction in Polymer Halloysite Nanotube Composites, Scientific Reports (2024)
13. Tuning of a Mechanics Model for the Electrical Conductivity of Cnt-Filled Samples Assuming Extended Cnt, European Physical Journal Plus (2022)
14. Simulation of Young's Modulus for Clay-Reinforced Nanocomposites Assuming Mechanical Percolation, Clay-Interphase Networks and Interfacial Linkage, Journal of Materials Research and Technology (2020)
15. Simple Models for Tensile Modulus of Shape Memory Polymer Nanocomposites at Ambient Temperature, Nanotechnology Reviews (2022)
16. Development of Jang–Yin Model for Effectual Conductivity of Nanocomposite Systems by Simple Equations for the Resistances of Carbon Nanotubes, Interphase and Tunneling Section, European Physical Journal Plus (2021)
17. Polymer Tunneling Resistivity Between Adjacent Carbon Nanotubes (Cnt) in Polymer Nanocomposites, Journal of Physics and Chemistry of Solids (2020)
18. Effect of Contact Resistance on the Electrical Conductivity of Polymer Graphene Nanocomposites to Optimize the Biosensors Detecting Breast Cancer Cells, Scientific Reports (2022)
19. Estimation of Average Contact Number of Carbon Nanotubes (Cnts) in Polymer Nanocomposites to Optimize the Electrical Conductivity, Engineering with Computers (2022)
20. Micromechanics Simulation of Electrical Conductivity for Carbon-Nanotube-Filled Polymer System by Adjusting Ouali Model, European Physical Journal Plus (2021)
21. A Simple Model for Gas Barrier Performance of Polymer Nanocomposites Considering Filler Alignment Angle and Diffusion Direction, Composites Science and Technology (2022)
22. Multiphase Approach for Calculation of Tunneling Conductivity of Graphene-Polymer Nanocomposites to Optimize Breast Cancer Biosensors, Composites Science and Technology (2023)
23. The Interphase Degradation in a Nanobiosensor Including Biopolymers and Carbon Nanotubes, Sensors and Actuators# A: Physical (2021)
24. Conduction Transportation From Graphene to an Insulative Polymer Medium: A Novel Approach for the Conductivity of Nanocomposites, Nanotechnology Reviews (2024)
25. Multifactorial Predicting of Conductivity in Polymer Nanocomposites With Graphene: Insights Into Imperfect Interphase Conduction, Polymer Composites (2025)
26. Electrical Conductivity of Graphene-Containing Composites by the Conduction and Volume Share of Networked Interphase and the Properties of Tunnels Applicable in Breast Cancer Sensors, Journal of Materials Science (2022)
27. Development of an Advanced Takayanagi Equation for the Electrical Conductivity of Carbon Nanotube-Reinforced Polymer Nanocomposites, Journal of Physics and Chemistry of Solids (2021)
28. Advancement of a Model for Electrical Conductivity of Polymer Nanocomposites Reinforced With Carbon Nanotubes by a Known Model for Thermal Conductivity, Engineering with Computers (2022)
29. Assessment of Electrical Conductivity of Polymer Nanocomposites Containing a Deficient Interphase Around Graphene Nanosheet, Scientific Reports (2024)
30. Advanced Models for Modulus and Strength of Carbon-Nanotube-Filled Polymer Systems Assuming the Networks of Carbon Nanotubes and Interphase Section, Mathematics (2021)
31. Simulation of Tensile Strength for Polymer Hydroxyapatite Nanocomposites by Interphase and Nanofiller Dimensions, Polymer Composites (2024)
32. Advancement of the Power-Law Model and Its Percolation Exponent for the Electrical Conductivity of a Graphene-Containing System As a Component in the Biosensing of Breast Cancer, Polymers (2022)
33. Effects of Interfacial Shear Strength on the Operative Aspects of Interphase Section and Tensile Strength of Carbon-Nanotube-Filled System: A Modeling Study, Results in Physics (2021)
34. Osteogenesis Capability of Three-Dimensionally Printed Poly(Lactic Acid)-Halloysite Nanotube Scaffolds Containing Strontium Ranelate, Nanotechnology Reviews (2022)
35. Significances of Effective Interphase Characteristics on the Pukanszky Interfacial Factor and Strength of Halloysite-Containing Composites After Mechanical Percolation Onset, Surfaces and Interfaces (2023)
36. Effects of a Deficient Interface, Tunneling Size and Interphase Depth on the Percolation Inception, Percentage of Graphene in the Nets and Conductivity of Nanocomposites, Diamond and Related Materials (2024)
37. Simulating of Effective Conductivity for Grapheme–Polymer Nanocomposites, Scientific Reports (2023)
38. Progressing of a Power Model for Electrical Conductivity of Graphene-Based Composites, Scientific Reports (2023)
39. Modeling of Electrical Conductivity for Graphene-Filled Products Assuming Interphase, Tunneling Effect, and Filler Agglomeration Optimizing Breast Cancer Biosensors, Materials (2022)
40. Modeling of Mechanical Behaviors and Interphase Properties of Polymer/Nanodiamond Composites for Biomedical Products, Journal of Materials Research and Technology (2022)
41. Tensile Modulus of Polymer Halloysite Nanotubes Nanocomposites Assuming Stress Transferring Through an Imperfect Interphase, Scientific Reports (2024)
42. Renovating Nanocomposite Design: A Novel Conductivity Model for Polymer Graphene Systems Incorporating Interphase and Tunneling Zones, Polymer Composites (2025)
43. Percolation Onset and Conductivity of Nanocomposites Assuming an Incomplete Dispersion of Graphene Nanosheets in a Polymer Matrix, Physical Chemistry Chemical Physics (2023)
44. Effective Conductivity of Carbon-Nanotube-Filled Systems by Interfacial Conductivity to Optimize Breast Cancer Cell Sensors, Nanomaterials (2022)
45. Expression of Characteristic Tunneling Distance to Control the Electrical Conductivity of Carbon Nanotubes-Reinforced Nanocomposites, Journal of Materials Research and Technology (2020)
46. Development and Simplification of a Micromechanic Model for Conductivity of Carbon Nanotubes-Reinforced Nanocomposites, Journal of Polymer Research (2021)
47. From Nano to Macro in Graphene-Polymer Nanocomposites: A New Methodology for Conductivity Prediction, Colloids and Surfaces A: Physicochemical and Engineering Aspects (2024)
48. An Innovative Model for Conductivity of Graphene-Based System by Networked Nano-Sheets, Interphase and Tunneling Zone, Scientific Reports (2022)
49. Advanced Predicting of Conductivity for Carbon Nanofiber Polymer Systems: Incorporating of Nanofiber, Interphase, and Tunneling Impacts, Surfaces and Interfaces (2025)
50. Development of a Theoretical Model for Estimating the Electrical Conductivity of a Polymeric System Reinforced With Silver Nanowires Applicable for the Biosensing of Breast Cancer Cells, Journal of Materials Research and Technology (2022)