Tehran University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Share this content! On (X network) By
Fracture Strength and Three-Dimensional Marginal Evaluation of Biocompatible High-Performance Polymer Versus Pressed Lithium Disilicate Crowns Publisher Pubmed



Arshad M1 ; Hassantash S2 ; Chinian S2 ; Sadr A3 ; Habibzadeh S4
Authors
Show Affiliations
Authors Affiliations
  1. 1. Dental Research Center, Dentistry Research Institute, Tehran University of Medical Sciences, Tehran, Iran, Associate Professor, Department of Prosthodontics, School of Dentistry, International Campus, Tehran University of Medical Sciences, Tehran, Iran
  2. 2. Graduate student, School of Dentistry, Tehran University of Medical Sciences, Tehran, Iran
  3. 3. Biomimetics Biomaterials Biophotonics Biomechanics & Technology Laboratory, Department of Restorative Dentistry, University of Washington, Seattle, Wash, United States
  4. 4. Associate Professor, Department of Prosthodontics, School of Dentistry, International Campus, Tehran University of Medical Sciences, Tehran, Iran, Associate Professor, Dental Research Center, Dentistry Research Institute, Tehran University of Medical Sciences, Tehran, Iran

Source: Journal of Prosthetic Dentistry Published:2023


Abstract

Statement of problem: Despite the acceptable physical properties of biocompatible high-performance polymer (BioHPP), little is known about the marginal accuracy and fracture strength of restorations made from this material. Purpose: This in vitro study assessed the marginal and internal adaptation and fracture strength of teeth restored with lithium disilicate (LD) ceramics and BioHPP monolithic crowns. Material and methods: Twenty-four extracted premolars were prepared for complete coverage crowns and divided into 2 groups to receive pressed IPS e.max LD, or computer-aided design and computer-aided manufacturing (CAD-CAM) BioHPP monolithic crowns. After adhesive cementation, the marginal and internal adaptations of the restorations were evaluated by microcomputed tomography at 18 points for each crown. Specimens were subjected to 6000 thermal cycles at 5 °C and 55 °C and 200 000 load cycles of 100 N at a frequency of 1.2 Hz. The fracture strength of the restorations was then measured in a universal testing machine at a crosshead speed of 0.5 mm/min. Data were analyzed via an independent-sample t-test (α=.05). Results: The mean ±standard deviation of marginal gap was 138.8 ±43.6 μm for LD and 242.1 ±70.7 μm for BioHPP groups (P=.001). The mean ±standard deviation value of absolute marginal discrepancy was 193.8 ±60.8 μm for LD and 263.5 ±97.6 μm for BioHPP groups (P=.06). The internal occlusal and axial gap measurements were 547.5 ±253.1 μm and 197.3 ±54.8 μm for LD (P=.03) and 360 ±62.9 μm and 152.8 ±44.8 μm for BioHPP (P=.04). The mean ±standard deviation of internal space volume was 15.3 ±11.8 μm³ for LD and 24.1 ±10.7 μm³ for BioHPP (P=.08). The mean ±standard deviation of fracture strength was 2509.8 ±680 N for BioHPP and 1090.4 ±454.2 MPa for LD groups (P<.05). Conclusions: The marginal adaptation of pressed lithium disilicate crowns was better, while BioHPP crowns displayed greater fracture strength. Marginal gap width was not correlated with fracture strength in either group. © 2023 Editorial Council for The Journal of Prosthetic Dentistry
Related Docs
View other Related Docs
1. Marginal Adaptation of Implant Prostheses Fabricated by Different Materials in Excessive Crown Height Space Before and After Veneering, Frontiers in Dentistry (2021)
2. Effect of Die Materials on Marginal and Internal Adaptation of Zirconia Copings: An in Vitro Study, Open Dentistry Journal (2021)
3. The Effect of Preparation Design on the Fracture Resistance and Adaptation of the Cerec Ceramic Endocrowns, Clinical and Experimental Dental Research (2023)
4. Fit of Cobalt-Chromium Copings Fabricated by the Selective Laser Melting Technology and Casting Method: A Comparative Evaluation Using a Profilometer, Dental Research Journal (2020)
5. Comparison of Marginal and Internal Adaptation in Endocrowns Milled From Translucent Zirconia and Zirconium Lithium Silicate, International Journal of Dentistry (2021)
6. Marginal and Internal Adaptation of Single Crowns and Fixed Dental Prostheses by Using Digital and Conventional Workflows: A Systematic Review and Meta-Analysis, Journal of Prosthetic Dentistry (2021)
7. In Vivo and in Vitro Comparison of Internal and Marginal Fit of Digital and Conventional Impressions for Full-Coverage Fixed Restorations: A Systematic Review and Meta-Analysis, Journal of Evidence-Based Dental Practice (2019)
8. Comparison of Three-Dimensional Digital Technique With Two-Dimensional Replica Method for Measuring Marginal and Internal Fit of Full Coverage Restorations, Journal of Advanced Prosthodontics (2020)
Experts (# of related papers)
View all Related Experts
Marzieh Alikhasi (7)
Safoura Ghodsi (7)
Other Related Docs
9. Marginal Fit of Monolithic Versus Layered Zirconia Crowns Assessed With 2 Marginal Gap Methods, Journal of Prosthetic Dentistry (2023)
10. Comparison of Marginal Adaptation of Different Implant-Supported Metal-Free Frameworks Before and After Cementation, International Journal of Prosthodontics (2019)
11. Comparing Retention and Internal Adaptation of Different Implant-Supported, Metal-Free Frameworks, International Journal of Prosthodontics (2018)
12. Do 3D Printed and Milled Tooth-Supported Complete Monolithic Zirconia Crowns Differ in Accuracy and Fit? a Systematic Review and Meta-Analysis of in Vitro Studies, Journal of Prosthetic Dentistry (2025)
13. How Adjustment Could Affect Internal and Marginal Adaptation of Cad/Cam Crowns Made With Different Materials, Journal of Advanced Prosthodontics (2020)
14. Comparison of Marginal and Internal Adaptation of Provisional Polymethyl Methacrylate Restorations Fabricated by Two Three‑Dimensional Printers:An in Vitro Study, Dental Research Journal (2023)
15. A Clinical Comparison of Digital and Conventional Impression Techniques Regarding Finish Line Locations and Impression Time, Journal of Esthetic and Restorative Dentistry (2020)
16. Comparison of the Marginal and Internal Fit of Pmma Interim Crowns Printed With Different Layer Thicknesses in 3D-Printing Technique, Clinical and Experimental Dental Research (2023)
17. Evaluating the Effect of Different Combination of Impression and Pouring Materials on Marginal and Internal Adaptation of Zirconia Crowns; [Evaluacion Del Efecto De Diferentes Combinaciones De Materiales De Impresion Y Vertido En La Adaptacion Marginal E Interna De Las Coronas De Circonio.], Journal of Oral Research (2020)