Isfahan University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Share this content! On (X network) By
Fabrication and Characterization of Pom/Zro2/Silk Fibroin Composite Scaffolds Publisher



Teimouri A1 ; Ghorbanian L2 ; Salavati H1 ; Chermahini AN3
Authors
Show Affiliations
Authors Affiliations
  1. 1. Chemistry Department, Payame Noor University, Tehran, 19395-4697, Iran
  2. 2. Department of Oral and Maxillofacial Pathology, School of Dentistry, Isfahan University of Medical Sciences, Isfahan, Iran
  3. 3. Department of Chemistry, Isfahan University of Technology, Isfahan, 841543111, Iran

Source: Materials Letters Published:2015


Abstract

Abstract A novel porous polyoxometalates (POM)/zirconia/silk fibroin nanocomposite (POM/ZrO2/SF) was prepared by the freeze-drying method. XRD, FT-IR and SEM characterized the physicochemical structures of the products, demonstrating the formation of the scaffold with nano-architecture. The immersion of POM/ZrO2/SF scaffolds in the simulated body fluid (SBF) showed in vitro bone-bioactivity. The developed POM/ZrO2/SF scaffolds could be a promising candidate in preparing scaffolds for tissue engineering application. © 2015 Elsevier B.V.
Related Docs
View other Related Docs
1. Nano-Composite of Silk Fibroin-Chitosan/Nano Zro2 for Tissue Engineering Applications: Fabrication and Morphology, International Journal of Biological Macromolecules (2015)
2. Zn-Substituted Mg2sio4 Nanoparticles-Incorporated Pcl-Silk Fibroin Composite Scaffold: A Multifunctional Platform Towards Bone Tissue Regeneration, Materials Science and Engineering C (2021)
3. Development of Porous Photopolymer Resin-Swcnt Produced by Digital Light Processing Technology Using for Bone Femur Application, Archives of Bone and Joint Surgery (2021)
4. Fabrication of 3D Porous Polyurethane-Graphene Oxide Scaffolds by a Sequential Two-Step Processing for Non-Load Bearing Bone Defects, Physica Scripta (2024)
5. Fabrication and Characterization of Novel Diopside/Silk Fibroin Nanocomposite Scaffolds for Potential Application in Maxillofacial Bone Regeneration, International Journal of Biological Macromolecules (2013)
6. Fabrication and Characterization of Silk/Forsterite Composites for Tissue Engineering Applications, Ceramics International (2014)
7. Synergetic Effect of Bioglass and Nano Montmorillonite on 3D Printed Nanocomposite of Polycaprolactone/Gelatin in the Fabrication of Bone Scaffolds, International Journal of Biological Macromolecules (2024)
8. Development and Investigation of Novel Alginate-Hyaluronic Acid Bone Fillers Using Freeze Drying Technique for Orthopedic Field, Nanomedicine Research Journal (2020)
Experts (# of related papers)
View all Related Experts
Saeed Karbasi (78)
Mohammad Rafienia (49)
Other Related Docs
9. Synthesis and Characterization of Bioactive Glass Coated Forsterite Scaffold for Tissue Engineering Applications, Journal of Alloys and Compounds (2017)
10. Fabrication and Characterization of Novel Polyhydroxybutyrate-Keratin/Nanohydroxyapatite Electrospun Fibers for Bone Tissue Engineering Applications, International Journal of Biological Macromolecules (2022)
11. A Femoral Shape Porous Scaffold Bio-Nanocomposite Fabricated Using 3D Printing and Freeze-Drying Technique for Orthopedic Application, Materials Chemistry and Physics (2022)
12. Evaluation of Physical, Mechanical and Biological Properties of Bioglass/Titania Scaffold Coated With Poly (3-Hydroxybutyrate)-Chitosan for Bone Tissue Engineering Applications, Materials Technology (2020)
13. Fabrication and Characterization of Nanostructure Diopside Scaffolds Using the Space Holder Method: Effect of Different Space Holders and Compaction Pressures, Materials and Design (2016)
14. Evaluation of Physical, Mechanical and Biological Properties of Β-Tri-Calcium Phosphate/Poly-3-Hydroxybutyrate Nano Composite Scaffold for Bone Tissue Engineering Application, Materials Technology (2021)
15. Preparation and Characterization of Silk-Chitosan Composite As a Three- Dimensional Tool for Culturing Osteoblast-Like Cells, Journal of Isfahan Medical School (2015)
16. Evaluation of the Effects of Nano-Tio2 on Bioactivity and Mechanical Properties of Nano Bioglass-P3hb Composite Scaffold for Bone Tissue Engineering, Journal of Materials Science: Materials in Medicine (2016)
17. Electrospun Captopril-Loaded Pcl-Carbon Quantum Dots Nanocomposite Scaffold: Fabrication, Characterization, and in Vitro Studies, Polymers for Advanced Technologies (2020)
18. Mechanical Evaluation of Nhap Scaffold Coated With Poly-3-Hydroxybutyrate for Bone Tissue Engineering, Journal of Nanoscience and Nanotechnology (2013)
19. Adipose-Derived Stem Cells Growth and Proliferation Enhancement Using Poly (Lactic-Co-Glycolic Acid) (Plga)/Fibrin Nanofiber Mats, Journal of Applied Biotechnology Reports (2021)
20. Silk Fibroin-Chondroitin Sulfate-Alginate Porous Scaffolds: Structural Properties and in Vitro Studies, Journal of Applied Polymer Science (2014)
21. A Novel Nano-Composite Scaold for Cartilage Tissue Engineering, Scientia Iranica (2018)
22. Fabrication and Characterization of Hydroxyapatite-Coated Forsterite Scaffold for Tissue Regeneration Applications, Bulletin of Materials Science (2015)
23. Effects of Nano-Bioactive Glass on Structural, Mechanical and Bioactivity Properties of Poly (3-Hydroxybutyrate) Electrospun Scaffold for Bone Tissue Engineering Applications, Materials Technology (2019)
24. Natural Hydroxyapatite/Diopside Nanocomposite Scaffold for Bone Tissue Engineering Applications: Physical, Mechanical, Bioactivity and Biodegradation Evaluation, Materials Technology (2022)
25. Physical and Mechanical Properties of a Poly-3-Hydroxybutyratecoated Nanocrystalline Hydroxyapatite Scaffold for Bone Tissue Engineering, Journal of Porous Materials (2012)
26. Preparation of a Novel Biodegradable Nanocomposite Scaffold Based on Poly (3-Hydroxybutyrate)/Bioglass Nanoparticles for Bone Tissue Engineering, Journal of Materials Science: Materials in Medicine (2010)
27. Incorporation of Nanohydroxyapatite and Vitamin D3 Into Electrospun Pcl/Gelatin Scaffolds: The Influence on the Physical and Chemical Properties and Cell Behavior for Bone Tissue Engineering, Polymers for Advanced Technologies (2018)
28. A Modular Approach to 3D-Printed Bilayer Composite Scaffolds for Osteochondral Tissue Engineering, Journal of Materials Science: Materials in Medicine (2024)
29. A New Approach to Fabrication of Cs/Bg/Cnt Nanocomposite Scaffold Towards Bone Tissue Engineering and Evaluation of Its Properties, Applied Surface Science (2015)
30. Magnesium-Zinc-Graphene Oxide Nanocomposite Scaffolds for Bone Tissue Engineering, Arabian Journal of Chemistry (2023)
31. Tunable Cellular Interactions and Physical Properties of Nanofibrous Pcl-Forsterite: Gelatin Scaffold Through Sequential Electrospinning, Composites Science and Technology (2013)
32. Fabrication and Characterization of 3D-Printed Composite Scaffolds of Coral-Derived Hydroxyapatite Nanoparticles/Polycaprolactone/Gelatin Carrying Doxorubicin for Bone Tissue Engineering, Journal of Materials Science: Materials in Medicine (2024)
33. Baghdadite/Polycaprolactone Nanocomposite Scaffolds: Preparation, Characterisation, and in Vitro Biological Responses of Human Osteoblast-Like Cells (Saos-2 Cell Line), Materials Technology (2020)
34. Effects of Multi-Wall Carbon Nanotubes on Structural and Mechanical Properties of Poly(3-Hydroxybutyrate)/Chitosan Electrospun Scaffolds for Cartilage Tissue Engineering, Bulletin of Materials Science (2017)
35. Highly Porous 3D Printed Scaffold Incorporated With Graphene Oxide-Merwinite and Coated With Igf1 Loaded Nanofibers for Calvarial Defect Repair, Journal of Polymers and the Environment (2024)
36. Sodium Alginate/Magnesium Oxide Nanocomposite Scaffolds for Bone Tissue Engineering, Polymers for Advanced Technologies (2018)
37. Incorporating Fingolimod Through Poly(Lactic-Co-Glycolic Acid) Nanoparticles in Electrospun Polyurethane/Polycaprolactone/Gelatin Scaffold: An in Vitro Study for Nerve Tissue Engineering, Polymers for Advanced Technologies (2022)
38. Plasma Surface Modification of Electrospun Polyhydroxybutyrate (Phb) Nanofibers to Investigate Their Performance in Bone Tissue Engineering, International Journal of Biological Macromolecules (2023)
39. Nano/Micro Hybrid Scaffold of Pcl or P3hb Nanofibers Combined With Silk Fibroin for Tendon and Ligament Tissue Engineering, Journal of Applied Biomaterials and Functional Materials (2015)
40. Fabrication and Characterization of Chitosan-Gelatin/Single-Walled Carbon Nanotubes Electrospun Composite Scaffolds for Cartilage Tissue Engineering Applications, Polymers for Advanced Technologies (2022)
41. A Novel Flexible, Conductive, and Three-Dimensional Reduced Graphene Oxide/Polyurethane Scaffold for Cell Attachment and Bone Regeneration, Materials and Design (2022)
42. Preparation and Characterization of Poly Ε-Caprolactone-Gelatin/Multi-Walled Carbon Nanotubes Electrospun Scaffolds for Cartilage Tissue Engineering Applications, International Journal of Polymeric Materials and Polymeric Biomaterials (2020)
43. Preparation of Fibrin/Poly Vinyl Alcohol Electrospun Nanofibers Scaffold for Tissue Engineering Applications, Journal of Isfahan Medical School (2016)
44. 3D Printed Polylactic Acid-Based Nanocomposite Scaffold Stuffed With Microporous Simvastatin-Loaded Polyelectrolyte for Craniofacial Reconstruction, International Journal of Biological Macromolecules (2024)
45. Blood Compatibility and Cell Response Improvement of Poly Glycerol Sebacate/Poly Lactic Acid Scaffold for Vascular Graft Applications, Journal of Biomedical Materials Research - Part A (2021)
46. Zeolitic Imidazolate Frameworks: From Bactericidal Properties to Tissue Regeneration, Journal of Controlled Release (2023)
47. Cytocompatibility and Antibacterial Properties of Coaxial Electrospun Nanofibers Containing Ciprofloxacin and Indomethacin Drugs, Polymers (2022)
48. Gehlenite Nanobioceramic: Sol-Gel Synthesis, Characterization, and in Vitro Assessment of Its Bioactivity, Materials Letters (2018)
49. Nanostructure, Molecular Dynamics Simulation and Mechanical Performance of Pcl Membranes Reinforced With Antibacterial Nanoparticles, Journal of Applied and Computational Mechanics (2021)
50. Synthetic Electrospun Nanofibers As a Supportive Matrix in Osteogenic Differentiation of Induced Pluripotent Stem Cells, Journal of Biomaterials Science, Polymer Edition (2022)