Tehran University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Faculty Members have conducted research related to the Evaluating the Final Color of Restorations With Three Cad/Cam Core Materials (Co-Cr, Zirconia, and Peek), Veneered by Two Methods (Indirect Cad/Cam Composite and Heat-Pressed Ceramics)
Somayeh Zeighami
Somayeh Zeighami

Associate Professor of Prosthodontics

Department Dental Prosthesis

School of Dentistry

Tehran University of Medical Sciences

All Documents
1. Effect of Occlusal Scheme and Bone-Level Implant Number and Position on Stress Distribution in Kennedy Class Ii Implant-Assisted Removable Partial Dentures: A 3D Finite Element Analysis, Clinical and Experimental Dental Research (2025)
2. Accuracy of Maxillary Full-Arch Digital Impressions of Tooth and Implant Models Made by Two Intraoral Scanners, Clinical and Experimental Dental Research (2024)
3. Reconstruction of Gingival Mask Around Cad-Cam Bar and Ball Attachment in Implant-Retained Overdenture, Case Reports in Dentistry (2024)
4. Evaluating the Final Color of Restorations With Three Cad/Cam Core Materials (Co-Cr, Zirconia, and Peek), Veneered by Two Methods (Indirect Cad/Cam Composite and Heat-Pressed Ceramics), International Journal of Dentistry (2023)
5. Comparing the Surface Behavior of Conventional and Cad-Cam Feldspathic Porcelains in the Face of Laser-Assisted Bleaching and Post-Bleach Polishing, Journal of Lasers in Medical Sciences (2022)
6. Comparison of Retention and Fracture Load of Endocrowns Made From Zirconia and Zirconium Lithium Silicate After Aging: An in Vitro Study, BMC Oral Health (2022)
7. Comparison of Fracture Resistance and Failure Mode in Digitally Milled Restorations With Rapid Layering by Indirect Composite Resin: An in Vitro Study, International Journal of Oral and Maxillofacial Implants (2021)
8. Comparison of Marginal and Internal Adaptation in Endocrowns Milled From Translucent Zirconia and Zirconium Lithium Silicate, International Journal of Dentistry (2021)
9. Evaluation of the Colour and Translucency Parameter of Conventional and Computer-Aided Design and Computer-Aided Manufacturing (Cad-Cam) Feldspathic Porcelains After Staining and Laser-Assisted Bleaching, Journal of Conservative Dentistry (2021)
10. Retention and Clinical Performance of Zirconia Crowns: A Comprehensive Review, International Journal of Dentistry (2020)
11. Comparison of Marginal Adaptation of Different Implant-Supported Metal-Free Frameworks Before and After Cementation, International Journal of Prosthodontics (2019)
12. Comparative Evaluation of the Effect of Impression Materials and Trays on the Accuracy of Angulated Implants Impressions, Journal of Clinical and Experimental Dentistry (2018)
13. Comparing Retention and Internal Adaptation of Different Implant-Supported, Metal-Free Frameworks, International Journal of Prosthodontics (2018)
14. Effect of Angle and Type of Customized Abutment (Castable & Cast-To) on Torque Loss and Fracture Resistance After Cyclic Loading, Open Dentistry Journal (2018)
15. The Effect of Flat Dual-Cure Stabilizer Occlusal Splint in Pain Relief of Individuals Suffering From Migraine Headaches, Open Dentistry Journal (2018)
16. Effect of Sandblasting Angle and Distance on Biaxial Flexural Strength of Zirconia-Based Ceramics, Journal of Contemporary Dental Practice (2017)
17. Effect of Repeated Firings on Microtensile Bond Strength of Bi-Layered Lithium Disilicate Ceramics (E.Max Cad and E.Max Press), Journal of Contemporary Dental Practice (2016)
18. Full Mouth Reconstruction of a Bruxer With Severely Worn Dentition: A Clinical Report, Case Reports in Dentistry (2015)