Pvc Membrane and All-Solid-Sate Sensor for the Potentiometric Analysis of Trimipramine Publisher



Sharifisistani M¹ ; Faridbod F^{2, 3} ; Rashedi H^{1, 4} ; Davarkhah N²
Source: International Journal of Electrochemical Science Published:2019

Abstract

Two symmetrical and asymmetrical potentiometric membrane electrodes were developed and evaluated for the analysis Trimipramine (TMP). The symmetrical electrode was a poly(vinyl chloride) (PVC) membrane electrode (PME), a similar membrane of which was further used on an all-solid-state (ASS) electrode to make the asymmetrical ASS-PME. Both instruments function based on the ion-exchange between aqueous solutions of TMP and an organic phase (i.e. the PVC membrane) optimally composed of 6% of an ion-pair of TMP-TPB, 63% of dibutyl phthalate, 30% of PVC and 1% of NaTPB. The optimal electrodes revealed a Nernstian behavior. The ASS electrode was prepared using a conductive composite of graphite, MWCNTs, and epoxy resin which was coated on a copper wire. The ASS-PME, on the other hand, was prepared by covering the ASS electrode with a thin layer of the optimal PVC membrane. The PME and ASS-PME revealed Nernstian slopes of 57.1±0.3 and 58.2±0.4 mV/decade over the concentration ranges of 1.0x10-6 -1.0x10-2 and 1.0x10-7 -1.0x10-4 M. The method of using the instruments was validated and the applicability of sensors for quality control analyses of TMP in pharmaceutical formulations, was also evaluated. © 2019 The Authors. Published by ESG. All Rights Reserved.