Isfahan University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Share this content! On (X network) By
Fabrication and Evaluation of a Nerve Guidance Conduit Capable of Ca2+ Ion Release to Accelerate Axon Extension in Peripheral Nerve Regeneration Publisher Pubmed



Zargar Kharazi A1 ; Dini G2 ; Naser R1
Authors
Show Affiliations
Authors Affiliations
  1. 1. Biomaterials Nanotechnology and Tissue Engineering faculty, School of Advanced Medical Technology, Isfahan University of Medical Sciences, Isfahan, 8174673461, Iran
  2. 2. Department of Nanotechnology Engineering, Faculty of Advanced Sciences and Technologies, University of Isfahan, Isfahan, 81746-73441, Iran

Source: Journal of Biomedical Materials Research - Part A Published:2018


Abstract

In this study, biodegradable nanocomposites consisting of poly (glycerol sebacate) (PGS) elastomeric matrix and the reinforcing phase of calcium titanate (CaTiO3) nanoparticles were fabricated as a nerve guidance conduit (NGC) for peripheral nerve regeneration. CaTiO3 nanoparticles were synthesized via the sol-gel method and calcined at 800°C for 60 min. PGS elastomer was synthesized via the polycondensation reaction of glycerol and sebacate (1:1) and 2.5 and 5 wt. percentages of the synthesized CaTiO3 nanoparticles were added to the PGS prepolymer solution. The composites obtained were heated in order to make crosslinks in the pre-polymer. CaTiO3 nanoparticles, PGS elastomer, and the composites fabricated were characterized in terms of their structural, chemical, physical, mechanical, and cell response properties to evaluate the feasibility of using the nanocomposite for NGC applications. The results indicated that CaTiO3 nanoparticles were 50 nm in size. When the nanoparticles were added to the PGS, the elastic modulus and tensile strength of the nanocomposite reached values of about 1 and 0.5 MPa, respectively that are near those of natural nerves. The degradation behavior and swelling of the nanocomposites, as compared with those of the PGS elastomer, were controlled by introducing CaTiO3 into the PGS, which swelling limitation could prevent nerve compression. It was observed that Ca2+ ions established chemical bonds with PGS, which led to high crosslink densities that, in turn, contribute to improved mechanical properties of the composite. The Ca2+ ions released from the nanocomposite samples were in the nontoxic range. The PC12 cell line on the surface of the nanocomposite specimens showed good cell adhesion and proliferation with improved axon outgrowth and extension. Based on the results obtained the fabricated PGS/CaTiO3 nanocomposite may be recommended as a suitable NGC with desirable effects on peripheral nerve regeneration. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2181-2189, 2018. © 2018 Wiley Periodicals, Inc.
Experts (# of related papers)
Other Related Docs
34. Pcl-Forsterite Nanocomposite Fibrous Membranes for Controlled Release of Dexamethasone, Journal of Materials Science: Materials in Medicine (2015)
36. Development of Novel Aligned Nanofibrous Composite Membranes for Guided Bone Regeneration, Journal of the Mechanical Behavior of Biomedical Materials (2013)