Isfahan University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Share this content! On (X network) By
Effect of Adhesive Resin As a Modeling Liquid on Elution of Resin Composite Restorations Publisher



Maalekipour M1 ; Safari M1 ; Barekatain M1 ; Fathi A2
Authors
Show Affiliations
Authors Affiliations
  1. 1. Department of Operative Dentistry, Dental School, Islamic Azad University, Isfahan (Khurasgan) Branch, Arghavaniye, Khurasgan, Isfahan, Iran
  2. 2. Dental Material Research Center, Department of Prosthodontics, School of Dentistry, Isfahan University of Medical Sciences, Isfahan, Iran

Source: International Journal of Dentistry Published:2021


Abstract

Background. Adhesive resin is increasingly used as a modeling liquid for composite. Based on previous studies, elution of some components from the composite mass negatively affects the oral tissues. Since few studies have focused on the effect of adhesive resin on composite mass, this study aimed to investigate the effect of dental adhesion factors as modeling liquid on the elution of substances from composite restorations. Materials and Methods. Sixty-four composite specimens (6 × 2 mm diameter × height) were prepared in four groups (n = 16) by using a Teflon ring. Composite mass was incrementally applied in four layers (0.5 mm). The control group contained no material between the layers, but other groups had one of the single bond, SE bond, and wetting resin adhesives between the layers. Specimens were immersed in distilled water and methanol. The amount of released triethylene glycol dimethacrylate (TEGDMA), urethane dimethacrylate (UDMA), and camphorquinone (CQ) was monitored by gas chromatography after 24 hours and 7 days. Data were analyzed with SPSS software through Kruskal-Wallis and Mann-Whitney U tests (α = 0.05). Results. The highest rate of released TEGDMA comonomer was seen in the wetting resin group in the water medium. The highest rate of released UDMA monomer was seen in SE bond and wetting resin groups in the methanol medium after 24 hours. The highest amount of released CQ in the methanol medium was observed in the SE bond group after 7 days. Conclusion. Single bond adhesive can be used as modeling liquid since it has no significant effect on the elution of components from composite mass. Whereas, wetting resin and SE bond adhesives are not suitable to be used as modeling liquid due to the high amounts of released TEGDMA and UDMA. © 2021 Mohammadreza Maalekipour et al.
Related Docs
View other Related Docs
1. Enhancing Adhesive Performance With N, N, N', N'-Tetrakis (2-Pyridyl Methyl) Ethylenediamine Matrix Metalloproteinase Inhibitors: A Comprehensive Study of Degree of Conversion, Microleakage, and Micro-Tensile Bond Strength in Dental Adhesives, Journal of Conservative Dentistry and Endodontics (2025)
2. Effect of Mtad on the Shear Bond Strength of Self-Etch Adhesives to Dentin, Dental Research Journal (2012)
3. Composite Resin Bond Strength to Caries-Affected Dentin Contaminated With 3 Different Hemostatic Agents, General Dentistry (2016)
4. A New Solvent-Free One-Step Self-Etch Adhesive: Bond Strength to Tooth Structures, Journal of Contemporary Dental Practice (2013)
5. Poly(Acrylic Acid) Grafted Montmorillonite As Novel Fillers for Dental Adhesives: Synthesis, Characterization and Properties of the Adhesive, Dental Materials (2012)
6. Effect of Thermocycling and Water Storage on Bond Longevity of Two Self-Etch Adhesives, General Dentistry (2013)
7. Effect of Dentin Dehydration and Composite Resin Polymerization Mode on Bond Strength of Two Self-Etch Adhesives, Contemporary Clinical Dentistry (2016)
8. Effects of Ethanol Concentrations of Acrylate Based Dental Adhesives on Microtensile Composite Dentin Bond Strength and Hybrid Layer Structure of a 10 Wt% Polyhedral Oligomeric Silsesquioxane (Poss) Incorporated Bonding Agent, Dental Research Journal (2018)
Experts (# of related papers)
View all Related Experts
Farzaneh Shirani (15)
Atiyeh Feiz (10)
Other Related Docs
9. Shear Bond Strengths and Morphological Evaluation of Filled and Unfilled Adhesive Interfaces to Enamel and Dentine, International Journal of Dentistry (2012)
10. Cytotoxicity of Orthodontic Bonding Adhesive Resins on Human Oral Fibroblasts, European Journal of Orthodontics (2010)
11. Comparative Evaluation of Microtensile Bond Strength of Four Glass-Containing Materials With Primary Teeth Dentin, Iranian Journal of Pediatrics (2019)
12. Repair Strength of Dimethacrylate‑Based Composites Resins: Effect of Sandblasting, Adhesive Bonding, and Thermocycling, Dental Research Journal (2023)
13. Effect of Ferric Sulfate Contamination on the Bonding Effectiveness of Etch-And-Rinse and Self-Etch Adhesives to Superficial Dentin, Journal of Conservative Dentistry (2013)
14. To Compare the Microleakage Among Experimental Adhesives Containing Nanoclay Fillers After the Storages of 24 Hours and 6 Months, Open Dentistry Journal (2011)
15. Interfacial Fracture Toughness of Universal Adhesive Systems Treated With an Antioxidant, Journal of Clinical and Experimental Dentistry (2018)
16. In-Vitro Comparison of the Effect of Different Bonding Strategies on the Micro-Shear Bond Strength of a Silorane-Based Composite Resin to Dentin, Dental Research Journal (2016)
17. Marginal Integrity of Low-Shrinkage and Methacrylate-Based Composite Resins: Effect of Three Different Hemostatic Agents, Journal of Clinical and Experimental Dentistry (2016)
18. Effect of Trichloroacetic Acid Hydrogel on Self-Etch Adhesive Bond Strength to Dental Tissues, Journal of Contemporary Dental Practice (2013)
19. Effect of Different Chemical Disinfectants on the Flexural Strength of Heat-Polymerized Acrylic Resins, The European journal of prosthodontics and restorative dentistry (2013)
20. Influence of Filler Existence on Microleakage of a Self-Etch Adhesive System, Journal of Conservative Dentistry (2014)
21. Effects of Rinsing Water Temperature and Preheated Composites on Microleakage of Composite Restorations With Two Bonding Agents, Frontiers in Dentistry (2022)
22. Bond Strength Evaluation of Ceramic Restorations With Immediate Dentin Sealing: A Systematic Review and Meta-Analysis, Journal of Dentistry (Iran) (2024)
23. Effect of Bioactive Glass‑Containing Dentin Adhesives on Microshear Bond Strength of Composite Restorations, Dental Research Journal (2023)
24. The Effect of Washing Water Temperature on Resin-Dentin Micro-Shear Bond Strength, Dental Research Journal (2016)
25. Resin Bonding Using Etch-And-Rinse and Self-Etch Adhesives to Decalcified Deciduous Enamel After Bioactive Glass Air Abrasion, The journal of contemporary dental practice (2014)
26. Bond Strength of Composite Resin to White Mineral Trioxide Aggregate: Effect of Different Surface Treatments, Journal of Conservative Dentistry (2018)
27. The Effect of Acrylate-Based Dental Adhesive Solvent Content on Microleakage in Composite Restorations, Dental Research Journal (2016)
28. Sealing Ability of Mta and Cem Cement As Root-End Fillings of Human Teeth in Dry, Saliva or Bloodcontaminated Conditions, Iranian Endodontic Journal (2010)
29. Evaluation of Light Curing Distance and Mylar Strips Color on Surface Hardness of Two Different Dental Composite Resins, Open Dentistry Journal (2014)
30. Influence of Enzymatic and Chemical Degradation on Zirconia Resin Bond Strength After Different Surface Treatments, American Journal of Dentistry (2010)
31. Influence of Intracanal Irrigants on Coronal Fracture Resistance of Endodontically Treated and Bleached Teeth: An in Vitro Study, Contemporary Clinical Dentistry (2017)
32. Effect of Different Protective Bases on Ph Changes and Hydrogen Peroxide Microleakage During Intracoronal Bleaching, Frontiers in Dentistry (2023)
33. Effect of Prewarming And/Or Delayed Light Activation on Resin-Modified Glass Ionomer Bond Strength to Tooth Structures, Operative Dentistry (2012)
34. Pharmaceutical Evaluation of Ziziphus Jujuba Mucoadhesive Buccal Film, Journal of Reports in Pharmaceutical Sciences (2015)
35. Effect of Fluoride Dentifrices on the Microhardness of Deciduous Enamel Surfaces, Oral Health and Preventive Dentistry (2012)
36. Porcelain Color Alteration After Orthodontic Bonding Using Three Different Surface Preparation Methods, Dental Research Journal (2018)
37. Adhesion to Er:Yag Laser and Bur Prepared Root and Crown Dentine, Australian Dental Journal (2012)
38. Mechanical and Dentin Bond Strength Properties of the Nanosilver Enriched Glass Ionomer Cement, Journal of Clinical and Experimental Dentistry (2019)
39. The Effect of Intraorifice Barriers (Theracal Lc, Lime-Lite and Ionoseal) on the Fracture Resistance and Failure Patterns of Endodontically Treated Teeth Submitted to Intracoronal Bleaching, Dental Research Journal (2023)
40. Effect of Cleaning Methods on Retentive Values of Saliva-Contaminated Implant-Supported Zirconia Copings, Clinical Oral Implants Research (2018)
41. Resin-Based Ceramic Matrix Composite Materials in Dentistry, Advances in Ceramic Matrix Composites (2014)
42. Impact of Silver Diamine Fluoride on Composite Resin Bond Strength: An in Vitro Study With Various Adhesive Systems, Heliyon (2025)
43. Effect of Polishing and Universal Bonding Application on Mercury Release From Aged Amalgam After Exposure to Bleaching Agents, Frontiers in Dentistry (2024)
44. Effect of Resin-Modified Glass Ionomer Containing Bioactive Glass on the Flexural Strength and Morphology of Demineralized Dentin., Operative dentistry (2013)
45. Prevention and Treatment of White Spot Lesions in Orthodontic Patients, Contemporary Clinical Dentistry (2017)
46. Effect of Storage Environment on the Bond Strength of Reattachment of Crown Fragments to Fractured Teeth, Journal of Conservative Dentistry (2011)
47. An in Vitro Evaluation of the Compressive Strength and Shear Bond Strength of Resin-Modified Glass-Ionomer Cement Containing Purified Powder of Salvia Officinalis, Dental Research Journal (2020)
48. A Comparative Study of Cervical Composite Restorations Microleakage Using Dental Universal Bonding and Two-Step Self-Etch Adhesive, Journal of Contemporary Dental Practice (2021)
49. Efficacy of the Resin Infiltration Technique in Preventing Initial Caries Progression: A Systematic Review and Meta-Analysis, Pediatric dentistry (2019)
50. Evaluation of Three Restorative Techniques for Primary Anterior Teeth With Extensive Carious Lesions: A 1-Year Clinical Study, Journal of Dentistry for Children (2013)