Tehran University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Share this content! By
Evaluation of 3D-Printed Polylactic Acid As a Bone Substitute: An Animal Study in a Rat Model Publisher Pubmed



Vp Ashok Velayudhan PILLAI ; Kg Mohanraj Karthik GANESH ; S Maiti SUBHABRATA ; Dn Veeraiyan Deepak NALLASWAMY ; Ag Heboyan Artak G
Authors

Source: Clinical and Experimental Dental Research Published:2025


Abstract

Objectives: Bone repair and regeneration are important processes for treating bone defects and injuries. However, traditional bone grafts like autografts and allografts have limitations, such as complications at the donor site and immune rejection. As a result, there is growing interest in using polylactic acid (PLA), a biodegradable and biocompatible material, as a synthetic bone substitute. This study aims to evaluate the effectiveness of 3D-printed PLA scaffolds as bone substitutes using a rat model. Material and Methods: PLA scaffolds with dimensions of 2 × 2 × 4 mm and 2 × 2 × 8 mm were fabricated using the CUBEX-TRIO 3D printer. Twelve male Wistar rats were divided into four groups based on defect size (4 and 8 mm) and observation period (4 weeks and 8 weeks). The surgical procedures involved creating discontinuity defects in the rats' zygoma and implanting PLA scaffolds that were stabilized with a bio-membrane. Bone regeneration was assessed through radiographic analysis and histological examination. Results: Radiographic analysis confirmed the formation of bone in the grafted regions. Histological analysis revealed connective tissue formation at the defect edges and scaffold surface at both 4 and 8 weeks. In the 4 mm defect group, the transformation of connective tissue into chondrocytes and endochondral ossification was observed at 8 weeks, indicating successful bone regeneration. However, in the 8 mm defect group, bone formation was not as evident, suggesting limitations in the osteoinductive potential of PLA scaffolds for larger defects. Conclusions: The 3D-printed PLA scaffolds show promise as bone substitutes for small to moderate-sized defects due to their effective biocompatibility and osteoinductive potential. Further studies are needed to optimize their performance for larger defects, potentially enhancing their clinical application in bone repair and regeneration. © 2025 Elsevier B.V., All rights reserved.
Related Docs
View other Related Docs
1. Functionalized 3D-Printed Scaffolds for Enhanced Osteogenesis and Guided Bone Regeneration, Journal of Materials Chemistry B (2025)
2. Fabrication and Characterization of 3D Collagen/ Polycaprolactone/ Hydroxyapatite Nanoparticles Scaffold Using 3D Printing Method for Repairing Damaged Bone Tissue, International Journal of Engineering, Transactions B: Applications (2025)
3. Application of Bioreactors to Improve Functionality of Bone Tissue Engineering Constructs: A Systematic Review, Current Stem Cell Research and Therapy (2017)
Experts (# of related papers)
View all Related Experts
Naghmeh Bahrami (4)
Mahmoud Azami (4)
Other Related Docs
4. Platelet-Rich Plasma Incorporated Electrospun Pva-Chitosan-Ha Nanofibers Accelerates Osteogenic Differentiation and Bone Reconstruction, Gene (2019)
5. Baghdadite Nanoparticle-Coated Poly L-Lactic Acid (Plla) Ceramics Scaffold Improved Osteogenic Differentiation of Adipose Tissue-Derived Mesenchymal Stem Cells, Journal of Biomedical Materials Research - Part A (2019)
6. Enhancing in Vitro Osteogenic Differentiation of Mesenchymal Stem Cells Via Sustained Dexamethasone Delivery in 3D-Printed Hybrid Scaffolds Based on Polycaprolactone-Nanohydroxyapatite/Alginate-Gelatin for Bone Regeneration, Journal of Biological Engineering (2025)
7. Electrospun Poly (3-Hydroxybutyrate-Co-3-Hydroxyvalerate)/Hydroxyapatite Scaffold With Unrestricted Somatic Stem Cells for Bone Regeneration, ASAIO Journal (2015)
8. Nanocomposite Scaffold Seeded With Mesenchymal Stem Cells for Bone Repair, Cell Biology International (2019)
9. Evaluation of the Effect of Adipose Tissue-Derived Stem Cells on the Quality of Bone Healing Around Implants, Connective Tissue Research (2016)
10. The Fundamentals of Tissue Engineering in the Process of Alveolar Bone Regeneration, Journal of Oral and Maxillofacial Surgery, Medicine, and Pathology (2025)
11. Enhanced Bone Tissue Regeneration Using a 3D-Printed Poly(Lactic Acid)/Ti6al4v Composite Scaffold With Plasma Treatment Modification, Scientific Reports (2023)
12. Kaempferol-Loaded Bioactive Glass-Based Scaffold for Bone Tissue Engineering: In Vitro and in Vivo Evaluation, Scientific Reports (2023)
13. Bone Repair With Differentiated Osteoblasts From Adipose-Derived Stem Cells in Hydroxyapatite/Tricalcium Phosphate in Vivo, International Journal of Preventive Medicine (2016)
14. In Vitro and in Vivo Investigation of Poly(Lactic Acid)/Hydroxyapatite Nanoparticle Scaffold Containing Nandrolone Decanoate for the Regeneration of Critical-Sized Bone Defects, Nanomedicine Journal (2020)
15. Recent Advances on 3D-Printed Pcl-Based Composite Scaffolds for Bone Tissue Engineering, Frontiers in Bioengineering and Biotechnology (2023)
16. A 3D-Printed Bone Scaffold of Carboxymethyl Chitosan/Gelatin/Akermanite: Synthesis and Evaluation, Journal of Polymers and the Environment (2025)
17. A Critical Review on the 3D Bioprinting in Large Bone Defects Regeneration, Bioprinting (2024)
18. The Potential of the Mineralized Bone Allograft Block As an Appropriate Candidate for Bone Tissue Engineering in Periodontology, Journal of Materials Research (2023)
19. Tetracycline Hydrochloride-Containing Poly (Ε-Caprolactone)/Poly Lactic Acid Scaffold for Bone Tissue Engineering Application: In Vitro and in Vivo Study, International Journal of Polymeric Materials and Polymeric Biomaterials (2019)
20. Bone Tissue Engineering Using 3-D Polycaprolactone/Gelatin Nanofibrous Scaffold Containing Berberine: In Vivo and in Vitro Study, Polymers for Advanced Technologies (2022)