Isfahan University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Share this content! On (X network) By
Magnesium/Nano-Hydroxyapatite Composite for Bone Reconstruction: The Effect of Processing Method Publisher



Khodaei M1 ; Nejatidanesh F2 ; Shirani MJ3 ; Iyengar S4 ; Sina H5 ; Savabi O6
Authors
Show Affiliations
Authors Affiliations
  1. 1. Department of Materials Science and Engineering, Golpayegan University of Technology, Golpayegan, 8771765651, Iran
  2. 2. Dental Materials Research Center, Dental Research Institute, School of Dentistry, Isfahan University of Medical Sciences, Isfahan, 8174673461, Iran
  3. 3. Post graduate student of Prosthodontics, Student Research Committee, School of Dentistry, Isfahan University of Medical Sciences, Isfahan, 8174673461, Iran
  4. 4. Materials Engineering Division, Faculty of Engineering, Lund University, Lund, 11822100, Sweden
  5. 5. European Spallation Source ERIC, Lund, 17622100, Sweden
  6. 6. Dental Research Center, Dental Research Institute, School of Dentistry, Isfahan University of Medical Sciences, Isfahan, 8174673461, Iran

Source: Journal of Bionic Engineering Published:2020


Abstract

Nano-ceramic particles can serve as reinforcing agents for metallic materials to improve their mechanical properties. However, it is important to ensure chemical compatibility between the matrix and particles. In the present study, magnesium composites with and without nano-hydroxyapatite (nHA) particles were fabricated for bone reconstruction applications. Two different techniques were used, Conventional Sintering (CS) of powder compacts and Spark Plasma Sintering (SPS) of pre-compacted powder. Results showed that a 10 wt% addition of nHA particles to magnesium, followed by SPS improved the compression strength by 27%. CS did not lead to any significant improvement compared to SPS processing. X-ray diffraction data after CS revealed the formation of unfavorable phases due to chemical reactions between nHA particles and the magnesium matrix, while these phases were absent after SPS processing. The mechanical properties of the specimens fabricated by CS were much inferior to those processed using SPS. The shorter processing time associated with SPS leaded to reduced interaction between nHA particles and the Mg-matrix, compared to CS. © 2020, Jilin University.
Related Docs
View other Related Docs
1. The Effect of the Nano- Bioglass Reinforcement on Magnesium Based Composite, Journal of the Mechanical Behavior of Biomedical Materials (2019)
2. Magnesium/Nano-Hydroxyapatite Porous Biodegradable Composite for Biomedical Applications, Materials Research Express (2019)
3. Synthesis and Characterization of Nanosized Magnesium-Doped Fluorapatite Powder and Coating for Biomedical Application, Journal of Sol-Gel Science and Technology (2015)
4. Magnesium-Zinc-Graphene Oxide Nanocomposite Scaffolds for Bone Tissue Engineering, Arabian Journal of Chemistry (2023)
5. Biodegradable Magnesium Bone Implants Coated With a Novel Bioceramic Nanocomposite, Materials (2020)
6. In Vivo Study of Nanostructured Akermanite/Peo Coating on Biodegradable Magnesium Alloy for Biomedical Applications, Journal of Biomedical Materials Research - Part A (2015)
7. Structural Comparison of Natural and Synthetic Nanocrystalline Hydroxyapatite, Journal of Isfahan Medical School (2012)
8. Synthesis and Dissolution Behavior of Nanosized Silicon and Magnesium Co-Doped Fluorapatite Obtained by High Energy Ball Milling, Ceramics International (2014)
Experts (# of related papers)
View all Related Experts
Saeed Karbasi (15)
Omid Savabi (11)
Other Related Docs
9. Comparing Nanostructured Hydroxyapatite Coating on Az91 Alloy Samples Via Sol-Gel and Electrophoretic Deposition for Biomedical Applications, IEEE Transactions on Nanobioscience (2014)
10. Evaluation of Physical and Mechanical Properties of Fi-Tri-Calcium Phosphate/Poly-3-Hydroxybutyrate Nanocomposite Scaffold for Bone Tissue Engineering Application, Scientia Iranica (2017)
11. Nanostructured Merwinite Bioceramic Coating on Mg Alloy Deposited by Electrophoretic Deposition, Ceramics International (2014)
12. Recent Advances on Akermanite Calcium-Silicate Ceramic for Biomedical Applications, International Journal of Applied Ceramic Technology (2021)
13. Preparation and Bioactivity Evaluation of Bone-Like Hydroxyapatite Nanopowder, Journal of Materials Processing Technology (2008)
14. Sodium Alginate/Magnesium Oxide Nanocomposite Scaffolds for Bone Tissue Engineering, Polymers for Advanced Technologies (2018)
15. Incorporation of Nanohydroxyapatite and Vitamin D3 Into Electrospun Pcl/Gelatin Scaffolds: The Influence on the Physical and Chemical Properties and Cell Behavior for Bone Tissue Engineering, Polymers for Advanced Technologies (2018)
16. Preparation, Chemistry and Physical Properties of Bone-Derived Hydroxyapatite Particles Having a Negative Zeta Potential, Materials Chemistry and Physics (2012)
17. Fabrication of Elastin Additive on Polymethyl Methacrylate and Hydroxyapatite-Based Bioactive Bone Cement, Materials Chemistry and Physics (2022)
18. Synthesis, Characterization, in Vitro Bioactivity and Biocompatibility Evaluation of Hydroxyapatite/Bredigite (Ca7mgsi4o16) Composite Nanoparticles, JOM (2016)
19. Physical and Mechanical Properties of a Poly-3-Hydroxybutyratecoated Nanocrystalline Hydroxyapatite Scaffold for Bone Tissue Engineering, Journal of Porous Materials (2012)
20. Effect of Calcium Silicate Nanoparticle on Surface Feature of Calcium Phosphates Hybrid Bio-Nanocomposite Using for Bone Substitute Application, Powder Technology (2020)
21. In Vivo Assessments of Bioabsorbable Az91 Magnesium Implants Coated With Nanostructured Fluoridated Hydroxyapatite by Mao/Epd Technique for Biomedical Applications, Materials Science and Engineering C (2015)
22. Calcitonin-Loaded Octamaleimic Acid–Silsesquioxane Nanoparticles in Hydrogel Scaffold Support Osteoinductivity in Bone Regeneration, Pharmaceutical Development and Technology (2021)
23. Natural Hydroxyapatite/Diopside Nanocomposite Scaffold for Bone Tissue Engineering Applications: Physical, Mechanical, Bioactivity and Biodegradation Evaluation, Materials Technology (2022)
24. Biodegradation Assessment of Nanostructured Fluoridated Hydroxyapatite Coatings on Biomedical Grade Magnesium Alloy, Ceramics International (2014)
25. Fabrication and Characterization Nanostructured Forsterite Foams With High Compressive Strength, Desired Porosity and Suitable Bioactivity for Biomedical Applications, Journal of Sol-Gel Science and Technology (2017)
26. Novel Sol–Gel-Derived Hardystonite-Based Biomagnetic Nanoparticles for Hyperthermia Applications, Journal of Sol-Gel Science and Technology (2016)
27. Improvement of in Vitro Behavior of an Mg Alloy Using a Nanostructured Composite Bioceramic Coating, Journal of Materials Science: Materials in Medicine (2018)
28. Synthesis, Characterization and Bioactivity Evaluation of Nano-Structured Hydroxyapatite, WIT Transactions on Engineering Sciences (2009)
29. Effect of Alumina Contents on Phase Stability and Mechanical Properties of Magnesium Fluorapatite/Alumina Composites, Journal of the Mechanical Behavior of Biomedical Materials (2014)
30. Improvement in Osseointegration of Tricalcium Phosphate-Zircon for Orthopedic Applications: An in Vitro and in Vivo Evaluation, Medical and Biological Engineering and Computing (2020)
31. Fabrication and Characterization of Hydroxyapatite-Coated Forsterite Scaffold for Tissue Regeneration Applications, Bulletin of Materials Science (2015)
32. Mechanical Evaluation of Nhap Scaffold Coated With Poly-3-Hydroxybutyrate for Bone Tissue Engineering, Journal of Nanoscience and Nanotechnology (2013)
33. The Influence of Bioglass Nanoparticles on the Biodegradation and Biocompatibility of Poly (3-Hydroxybutyrate) Scaffolds, International Journal of Artificial Organs (2012)
34. Effects of Bioglass Nanoparticles on Bioactivity and Mechanical Property of Poly(3-Hydroxybutirate) Scaffolds, Scientia Iranica (2013)
35. Electrophoretic Deposition of Nanostructured Hydroxyapatite Coating on Az91 Magnesium Alloy Implants With Different Surface Treatments, Applied Surface Science (2013)
36. Fabrication and Evaluation of Amalgam/Nano Hydroxyapatite Composites for Dental Restoration, Materials Research Express (2018)
37. Piezo-Biphasic Scaffold Based on Polycaprolactone Containing Batio3 and Hydroxyapatite Nanoparticles Using Three-Dimensional Printing for Bone Regeneration, International Journal of Applied Ceramic Technology (2025)
38. Coating of Biodegradable Magnesium Alloy Bone Implants Using Nanostructured Diopside (Camgsi 2 O 6 ), Applied Surface Science (2014)
39. An in Vitro Evaluation of Novel Nha/Zircon Plasma Coating on 316L Stainless Steel Dental Implant, Progress in Natural Science: Materials International (2014)
40. Lithium Metasilicate Glass‑Ceramic Fabrication Using Spark Plasma Sintering, Dental Research Journal (2023)
41. Morphology and Degradation of Poly (3-Hydroxybutyrate)/ Nano-Hydroxyapatite Scaffold Used in Tissue Engineering, Journal of Isfahan Medical School (2012)
42. Analysis of Amorphous Structure With Polycaprolactone-Hydroxyapatite Nanoparticles Fabricated by 3D Bioprinter Technique for Bone Tissue Engineering, Ceramics International (2023)
43. Investigation on Bioactivity and Cytotoxicity of Mesoporous Nano-Composite Mcm-48/Hydroxyapatite for Ibuprofen Drug Delivery, Ceramics International (2014)
44. Controlling the Degradation Rate of Az91 Magnesium Alloy Via Sol-Gel Derived Nanostructured Hydroxyapatite Coating, Materials Science and Engineering C (2013)
45. Evaluation of the Effects of Nano-Tio2 on Bioactivity and Mechanical Properties of Nano Bioglass-P3hb Composite Scaffold for Bone Tissue Engineering, Journal of Materials Science: Materials in Medicine (2016)
46. Global Criterion Optimization Method for Improving the Porosity of Porous Scaffolds Containing Magnetic Nanoparticles: Fabrication and Finite Element Analysis, Materials Science and Engineering: B (2023)
47. Surface Characteristics and Bioactivity of a Novel Natural Ha/Zircon Nanocomposite Coated on Dental Implants, BioMed Research International (2014)
48. Evaluation of Physical, Mechanical and Biological Properties of Β-Tri-Calcium Phosphate/Poly-3-Hydroxybutyrate Nano Composite Scaffold for Bone Tissue Engineering Application, Materials Technology (2021)
49. Evaluating and Modeling the Mechanical Properties of the Prepared Plga/Nano-Bcp Composite Scaffolds for Bone Tissue Engineering, Journal of Materials Science and Technology (2011)
50. Nano-Biphasic Calcium Phosphate Ceramic for the Repair of Bone Defects, Journal of Craniofacial Surgery (2018)