Isfahan University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Share this content! On (X network) By
Magnesium/Nano-Hydroxyapatite Porous Biodegradable Composite for Biomedical Applications Publisher



Moradi E1 ; Ebrahimianhosseinabadi M1 ; Khodaei M2 ; Toghyani S3
Authors
Show Affiliations
Authors Affiliations
  1. 1. Department of Biomedical Engineering, Faculty of Engineering, University of Isfahan, Isfahan, Iran
  2. 2. Department of Materials Science and Engineering, Golpayegan University of Technology, Golpayegan, Iran
  3. 3. Dental Research Center, School of Dentistry, Isfahan University of Medical Sciences, Isfahan, Iran

Source: Materials Research Express Published:2019


Abstract

The main purpose of this study was to fabricate a magnesium/nano-hydroxyapatite porous composite with appropriate mechanical properties and degradation rate for biomedical applications. Magnesium scaffolds including different weight of nano-hydroxyapatite (0, 2, 4 and 8%) were fabricated using the powder metallurgy method. To study the phase and microstructure, the samples were characterized by x-ray diffraction (XRD) and scanning electron microscopy (SEM). Measurement of the mechanical properties was performed using a compression test, and the porosimetry test was performed by following the Archimedes method. Biodegradation properties of the specimens were evaluated by soaking in the phosphate-buffered saline (PBS). Based on the results, composites with 2 and 4 wt% of nano-hydroxyapatite (nHA) had the optimum characteristics; the yield strength of these composites was about twice and the plateau stress was about three to four times more than that of the pure magnesium. Also, the elastic modulus of these composites (0.25 GPa) was in cancellous bone range. The degradation rate of the composites with 2 and 4 wt% of nano-hydroxyapatite, as compared with pure magnesium, was decreased about 35 to 40 percent. Mg/nHA composite including 2-4 wt% of hydroxyapatite could be, therefore, considered as an appropriate alternative material for degradable load bearing implantation. © 2019 IOP Publishing Ltd.
Related Docs
View other Related Docs
1. Improvement of in Vitro Behavior of an Mg Alloy Using a Nanostructured Composite Bioceramic Coating, Journal of Materials Science: Materials in Medicine (2018)
2. Magnesium/Nano-Hydroxyapatite Composite for Bone Reconstruction: The Effect of Processing Method, Journal of Bionic Engineering (2020)
3. Biodegradable Magnesium Bone Implants Coated With a Novel Bioceramic Nanocomposite, Materials (2020)
4. The Effect of the Nano- Bioglass Reinforcement on Magnesium Based Composite, Journal of the Mechanical Behavior of Biomedical Materials (2019)
5. Nanostructured Merwinite Bioceramic Coating on Mg Alloy Deposited by Electrophoretic Deposition, Ceramics International (2014)
6. Fabrication and Characterization of Porous Co-Cr-Mo/58S Bioglass Nano-Composite by Using Nh4hco3 As Space-Holder, Materials and Design (2015)
7. Surface Modification of Mg-Doped Fluoridated Hydroxyapatite Nanoparticles Using Bioactive Amino Acids As the Coupling Agent for Biomedical Applications, Ceramics International (2015)
8. Improvement of Biodegradability, Bioactivity, Mechanical Integrity and Cytocompatibility Behavior of Biodegradable Mg Based Orthopedic Implants Using Nanostructured Bredigite (Ca7mgsi4o16) Bioceramic Coated Via Asd/Epd Technique, Annals of Biomedical Engineering (2014)
Experts (# of related papers)
View all Related Experts
Saeed Karbasi (26)
Mohammad Rafienia (26)
Other Related Docs
9. Combinatorial Fluorapatite-Based Scaffolds Substituted With Strontium, Magnesium and Silicon Ions for Mending Bone Defects, Materials Science and Engineering C (2021)
10. Mechanical and Cytotoxicity Evaluation of Nanostructured Hydroxyapatite-Bredigite Scaffolds for Bone Regeneration, Materials Science and Engineering C (2016)
11. Synthesis and Characterization of Nanosized Magnesium-Doped Fluorapatite Powder and Coating for Biomedical Application, Journal of Sol-Gel Science and Technology (2015)
12. Controlling the Degradation Rate of Az91 Magnesium Alloy Via Sol-Gel Derived Nanostructured Hydroxyapatite Coating, Materials Science and Engineering C (2013)
13. Controlling the Degradation Rate of Bioactive Magnesium Implants by Electrophoretic Deposition of Akermanite Coating, Ceramics International (2014)
14. Morphology and Degradation of Poly (3-Hydroxybutyrate)/ Nano-Hydroxyapatite Scaffold Used in Tissue Engineering, Journal of Isfahan Medical School (2012)
15. Structural Comparison of Natural and Synthetic Nanocrystalline Hydroxyapatite, Journal of Isfahan Medical School (2012)
16. Electrophoretic Deposition of Nanostructured Hydroxyapatite Coating on Az91 Magnesium Alloy Implants With Different Surface Treatments, Applied Surface Science (2013)
17. The Influence of Bioglass Nanoparticles on the Biodegradation and Biocompatibility of Poly (3-Hydroxybutyrate) Scaffolds, International Journal of Artificial Organs (2012)
18. Synthesis and Dissolution Behavior of Nanosized Silicon and Magnesium Co-Doped Fluorapatite Obtained by High Energy Ball Milling, Ceramics International (2014)
19. Synthesis, Characterization and Bioactivity Evaluation of Nano-Structured Hydroxyapatite, WIT Transactions on Engineering Sciences (2009)
20. Comparing Nanostructured Hydroxyapatite Coating on Az91 Alloy Samples Via Sol-Gel and Electrophoretic Deposition for Biomedical Applications, IEEE Transactions on Nanobioscience (2014)
21. Biodegradation Assessment of Nanostructured Fluoridated Hydroxyapatite Coatings on Biomedical Grade Magnesium Alloy, Ceramics International (2014)
22. Magnesium-Zinc-Graphene Oxide Nanocomposite Scaffolds for Bone Tissue Engineering, Arabian Journal of Chemistry (2023)
23. In Vivo Study of Nanostructured Diopside (Camgsi 2 O 6 ) Coating on Magnesium Alloy As Biodegradable Orthopedic Implants, Applied Surface Science (2014)
24. In Vivo Study of Nanostructured Akermanite/Peo Coating on Biodegradable Magnesium Alloy for Biomedical Applications, Journal of Biomedical Materials Research - Part A (2015)
25. Effects of Nano-Biphasic Calcium Phosphate Composite on Bioactivity and Osteoblast Cell Behavior in Tissue Engineering Applications, Journal of Medical Signals and Sensors (2016)
26. In Vitro Analysis of Electrophoretic Deposited Fluoridated Hydroxyapatite Coating on Micro-Arc Oxidized Az91 Magnesium Alloy for Biomaterials Applications, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science (2015)
27. Sol-Gel Derived Mesoporous 45S5 Bioactive Glass Containing Mg and Zr Ions: Synthesis, Characterization, and in Vitro Biological Investigation, Arabian Journal of Chemistry (2024)
28. The Electrospun Poly(Ε-Caprolactone)/Fluoridated Hydroxyapatite Nanocomposite for Bone Tissue Engineering, Polymers for Advanced Technologies (2020)
29. Effect of Cao Additive on the Properties of Plasma Electrolytic Oxidation Coatings on Az31 Mg Alloy, Journal of Materials Engineering and Performance (2025)
30. Surface Microstructure and in Vitro Analysis of Nanostructured Akermanite (Ca2mgsi2o7) Coating on Biodegradable Magnesium Alloy for Biomedical Applications, Colloids and Surfaces B: Biointerfaces (2014)
31. Micro-Arc Oxidation and Electrophoretic Deposition of Nano-Grain Merwinite (Ca3mgsi2o8) Surface Coating on Magnesium Alloy As Biodegradable Metallic Implant, Surface and Interface Analysis (2014)
32. Investigation on Bioactivity and Cytotoxicity of Mesoporous Nano-Composite Mcm-48/Hydroxyapatite for Ibuprofen Drug Delivery, Ceramics International (2014)
33. Analysis of Amorphous Structure With Polycaprolactone-Hydroxyapatite Nanoparticles Fabricated by 3D Bioprinter Technique for Bone Tissue Engineering, Ceramics International (2023)
34. Coating of Biodegradable Magnesium Alloy Bone Implants Using Nanostructured Diopside (Camgsi 2 O 6 ), Applied Surface Science (2014)
35. Effects of Bioglass Nanoparticles on Bioactivity and Mechanical Property of Poly(3-Hydroxybutirate) Scaffolds, Scientia Iranica (2013)
36. Mechanical Evaluation of Nhap Scaffold Coated With Poly-3-Hydroxybutyrate for Bone Tissue Engineering, Journal of Nanoscience and Nanotechnology (2013)
37. Fabrication and Characterization of Hydroxyapatite-Coated Forsterite Scaffold for Tissue Regeneration Applications, Bulletin of Materials Science (2015)
38. Biodegradable Magnesium Alloy Coated by Fluoridated Hydroxyapatite Using Mao/Epd Technique, Surface Engineering (2014)
39. In Vivo Assessments of Bioabsorbable Az91 Magnesium Implants Coated With Nanostructured Fluoridated Hydroxyapatite by Mao/Epd Technique for Biomedical Applications, Materials Science and Engineering C (2015)
40. Effect of Calcium Silicate Nanoparticle on Surface Feature of Calcium Phosphates Hybrid Bio-Nanocomposite Using for Bone Substitute Application, Powder Technology (2020)
41. Physical and Mechanical Properties of a Poly-3-Hydroxybutyratecoated Nanocrystalline Hydroxyapatite Scaffold for Bone Tissue Engineering, Journal of Porous Materials (2012)
42. Synthesis, Characterization, in Vitro Bioactivity and Biocompatibility Evaluation of Hydroxyapatite/Bredigite (Ca7mgsi4o16) Composite Nanoparticles, JOM (2016)
43. Fabrication of Elastin Additive on Polymethyl Methacrylate and Hydroxyapatite-Based Bioactive Bone Cement, Materials Chemistry and Physics (2022)
44. Preparation and Bioactivity Evaluation of Bone-Like Hydroxyapatite Nanopowder, Journal of Materials Processing Technology (2008)
45. Recent Advances on Akermanite Calcium-Silicate Ceramic for Biomedical Applications, International Journal of Applied Ceramic Technology (2021)
46. Fabrication and Characterization of 3D-Printed Composite Scaffolds of Coral-Derived Hydroxyapatite Nanoparticles/Polycaprolactone/Gelatin Carrying Doxorubicin for Bone Tissue Engineering, Journal of Materials Science: Materials in Medicine (2024)
47. Natural Hydroxyapatite/Diopside Nanocomposite Scaffold for Bone Tissue Engineering Applications: Physical, Mechanical, Bioactivity and Biodegradation Evaluation, Materials Technology (2022)
48. Fabrication and Characterization of Polycaprolactone Fumarate/Gelatin-Based Nanocomposite Incorporated With Silicon and Magnesium Co-Doped Fluorapatite Nanoparticles Using Electrospinning Method, Materials Science and Engineering C (2020)
49. In Vitro Studies of Polycaprolactone Nanofibrous Scaffolds Containing Novel Gehlenite Nanoparticles, Journal of Medical Signals and Sensors (2021)
50. Simultaneous Structural and Surface Modifications of Nanophase Hydroxyapatite for Improving Its Dissolution and Bioactivity, Ceramics International (2016)