Isfahan University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Share this content! On (X network) By
Development and Evaluation of Sustained-Release Propranolol Wax Microspheres Publisher Pubmed



Varshosaz J1 ; Keihanfar M1
Authors
Show Affiliations
Authors Affiliations
  1. 1. Department of Pharmaceutics, Sch. of Pharmacy/Pharmaceutical Sci., Isfahan Univ. of Medical Sciences, Isfahan, PO Box 81745-359, Iran

Source: Journal of Microencapsulation Published:2001


Abstract

To obtain a sustained-release dosage form with a lack of gastric unwanted effects, wax microspheres containing propranolol (I) were prepared by a congealable dispersion microencapsulation technique. The effects of the process variables; type of wax, speed of emulsification, amount of drug loaded, type and amount of emulsifier, were studied on the entrapment efficiency, angle of repose, dissolution efficiency (DE), in-vitro drug release and mean particle size of (I) microspheres, by a factorial design. The results showed that changes in the amount of emulsifier. (Tween), 0.04% and 0.08%, the type of Tween (80 and 20) and the wax type; beeswax or ceresine, caused a significant decrease in the entrapment efficiency. All the variables had an effect on the angle of repose and particle size of the (I) microspheres. The only significant parameter affecting the DE was the nature of the wax. The drug release in pH 6.8 was affected by all the variables except the amount of emulsifier. The formulation with a 0.25:4 ratio of drug:ceresine wax and 0.04% of Tween 80 in 600 rpm emulsification speed showed a suitable multiparticulate delivery system for the retarded dissolution of entrapped active ingredients, allowing absorption only in the intestinal tract.
Related Docs
View other Related Docs
1. Investigation of Lipidic Solid Nanoparticles From Propolis and Bees Waxes Produced by Antisolvent Precipitation Method, Journal of Food Science and Technology (Iran) (2021)
2. Preparation and Evaluation of Minoxidil Foamable Emu Oil Emulsion, Research in Pharmaceutical Sciences (2014)
3. Preparation and Characterization of a Sustained Release Buccoadhesive System for Delivery of Terbutaline Sulfate, Research in Pharmaceutical Sciences (2013)
4. Design, Formulation, and Physicochemical Evaluation of Montelukast Orally Disintegrating Tablet, International Journal of Preventive Medicine (2016)
5. Development of Lecithin Nanoemulsion Based Organogels for Permeation Enhancement of Metoprolol Through Rat Skin, Journal of Nanomaterials (2013)
6. Development of Novel Budesonide Pellets Based on Codes™ Technology: In Vitro/In Vivo Evaluation in Induced Colitis in Rats, DARU, Journal of Pharmaceutical Sciences (2011)
7. Formulation and Optimization of Solid Lipid Nanoparticle Formulation for Pulmonary Delivery of Budesonide Using Taguchi and Box-Behnken Design, Research in Pharmaceutical Sciences (2015)
8. Preparation and Pharmaceutical Evaluation of Glibenclamide Slow Release Mucoadhesive Buccal Film, Research in Pharmaceutical Sciences (2014)
Experts (# of related papers)
View all Related Experts
Jaleh Varshosaz (30)
Jaber Emami Baferani (11)
Other Related Docs
9. Use of Enteric Polymers for Production of Microspheres by Extrusion-Spheronization, Pharmaceutica Acta Helvetiae (1997)
10. Development and Optimization of Solid Lipid Nanoparticles of Amikacin by Central Composite Design, Journal of Liposome Research (2010)
11. Biological Safety Evaluation of Stealth Solid Lipid Nanoparticles of Risperidone: Effect of Surface Characteristics on Their Hydrophobicity, Haemolysis and Macrophage Phagocytosis, Farmacia (2012)
12. Enhancement of Dissolution Rate of Fenofibrate by Spray Drying Technique: Comparison of Eudragit E-100, Solutol® Hs15 and Hydroxypropyl Cellulose As Carriers, Farmacia (2015)
13. Preparation and in Vitro Evaluation of Vancomycin Loaded Montmorillonite-Sodium Alginate Topical Gel for Wound Infection, Brazilian Journal of Pharmaceutical Sciences (2022)
14. Dissolution Enhancement of Gliclazide Using Ph Change Approach in Presence of Twelve Stabilizers With Various Physico-Chemical Properties, Journal of Pharmacy and Pharmaceutical Sciences (2009)
15. Edible Wax-Based Nanoparticles As Novel Stabilizers for Oil-In-Water Pickering Emulsion, Food and Bioprocess Technology (2023)
16. Effects of Concentration, Temperature and Polymer Type on Drug Release From Montmorillonite-Donepezil Nanocomposites, Journal of Isfahan Medical School (2013)
17. Hyaluronate Targeted Solid Lipid Nanoparticles of Etoposide: Optimization and in Vitro Characterization, Journal of Nanomaterials (2014)
18. The Effect of Formulation Variables on the Characteristics of Insulin-Loaded Poly(Lactic-Co-Glycolic Acid) Microspheres Prepared by a Single Phase Oil in Oil Solvent Evaporation Method, Colloids and Surfaces B: Biointerfaces (2009)
19. Formulation and Optimization of Solid Lipid Nanoparticles of Buspirone Hcl for Enhancement of Its Oral Bioavailability, Journal of Liposome Research (2010)
20. Effect of Temperature and Stirring Rate on Flow and Compactability Properties of Simvastatin Spherical Crystals, International Journal of Pharmacy and Pharmaceutical Sciences (2011)
21. Development and Characterization of Floating Microballoons for Oral Delivery of Cinnarizine by a Factorial Design, Journal of Microencapsulation (2007)
22. Preparation and Evaluation of Theophylline Sustained Release Microcapsules Using Coacervation, Journal of Dispersion Science and Technology (2012)
23. Gastric Floating Matrix Tablets of Metformin Hcl: Design and Optimization Using Combination of Polymers, Journal of Reports in Pharmaceutical Sciences (2016)
24. Preparation, Optimization, and Screening of the Effect of Processing Variables on Agar Nanospheres Loaded With Bupropion Hcl by a D-Optimal Design, BioMed Research International (2015)
25. Colon-Specific Delivery of Mesalazine Chitosan Microspheres, Journal of Microencapsulation (2006)
26. Enhancement of Oral Bioavailability of Pentoxifylline by Solid Lipid Nanoparticles, Journal of Liposome Research (2010)
27. Cinnamaldehyde Encapsulation Within New Natural Wax-Based Nanoparticles; Formation, Optimization and Characterization, Journal of Dispersion Science and Technology (2023)
28. Pulmonary Delivery of Docetaxel and Celecoxib by Plga Porous Microparticles for Their Synergistic Effects Against Lung Cancer, Anti-Cancer Agents in Medicinal Chemistry (2022)
29. Preparation and in Vitro Evaluation of Sustained-Release Matrix Tablets of Flutamide Using Synthetic and Naturally Occurring Polymers, Iranian Journal of Pharmaceutical Research (2008)
30. Influence of Β - Cyclodextrin Complexation on Lovastatin Release From Osmotic Pump Tablets (Opt), Daru (2007)
31. Fabrication of Edible Solid Lipid Nanoparticle From Beeswax/Propolis Wax by Spontaneous Emulsification: Optimization, Characterization and Stability, Food Chemistry (2022)
32. Fabrication of Polymeric Nanoparticles of Poly(Ethylene-Co-Vinyl Acetate) Coated With Chitosan for Pulmonary Delivery of Carvedilol, Journal of Applied Polymer Science (2014)
33. Colon Specific Delivery of Budesonide Based on Triple Coated Pellets: In Vitro/In Vivo Evaluation, Acta Pharmaceutica (2012)
34. Particle Size Design of Plga Microspheres for Potential Pulmonary Drug Delivery Using Response Surface Methodology, Journal of Microencapsulation (2009)
35. Preparation, Characterization and Optimization of Glipizide Controlled Release Nanoparticles, Research in Pharmaceutical Sciences (2014)
36. Thermal Treating of Acrylic Matrices As a Tool for Controlling Drug Release, Chemical and Pharmaceutical Bulletin (2009)
37. Formulation of Ldl Targeted Nanostructured Lipid Carriers Loaded With Paclitaxel: A Detailed Study of Preparation, Freeze Drying Condition, and in Vitro Cytotoxicity, Journal of Nanomaterials (2012)
38. The Effect of Process Parameters on the Size and Morphology of Poly(D, L-Lactide-Co-Glycolide) Micro/Nanoparticles Prepared by an Oil in Oil Emulsion/Solvent Evaporation Technique, Journal of Applied Polymer Science (2010)
39. Preparation and Characterization of Metoprolol Controlled-Release Solid Dispersions, Drug Delivery (2006)
40. Formulation and Characterization of Novel Nanostructured Lipid Carriers Made From Beeswax, Propolis Wax and Pomegranate Seed Oil, Food Chemistry (2018)
41. Hesperetin-Loaded Solid Lipid Nanoparticles and Nanostructure Lipid Carriers for Food Fortification: Preparation, Characterization, and Modeling, Food and Bioprocess Technology (2013)
42. Simvastatin Nanosuspensions Prepared Using a Combination of Ph-Sensitive and Timed-Release Approaches for Potential Treatment of Colorectal Cancer, Pharmaceutical Development and Technology (2021)
43. Thermosensitive Hydrogel Containing Sertaconazole Loaded Nanostructured Lipid Carriers for Potential Treatment of Fungal Keratitis, Pharmaceutical Development and Technology (2019)
44. Double-Walled Microspheres Loaded With Meglumine Antimoniate: Preparation, Characterization and in Vitro Release Study, Drug Development and Industrial Pharmacy (2014)
45. Propolis Wax Nanostructured Lipid Carrier for Delivery of Β Sitosterol: Effect of Formulation Variables on Physicochemical Properties, Food Chemistry (2018)
46. Comparing Various Techniques to Produce Micro/Nanoparticles for Enhancing the Dissolution of Celecoxib Containing Pvp, European Journal of Pharmaceutics and Biopharmaceutics (2014)