Isfahan University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Share this content! On (X network) By
Thermal Rise During Photopolymerization and Degree of Conversion of Bulk Fill and Conventional Resin Composites Publisher



Mousavinasab S1 ; Taromi Z2 ; Zajkani E1
Authors
Show Affiliations
Authors Affiliations
  1. 1. Dental Materials Research Center, Department of Restorative Dentistry, Dental Research Institute, Isfahan University of Medical Sciences, Isfahan, Iran
  2. 2. Department of Restorative Dentistry, School of Dentistry, Zanjan University of Medical Sciences, Zanjan, Iran

Source: Dental Research Journal Published:2020


Abstract

Light curing of resin composite is associated with a thermal rise that may have harmful effect on the health of the vital pulp. In addition, desirable polymerization is important to achieve mechanical properties and clinical function. The purpose of this in-vitro study was to compare the thermal rise under normal dentin during photopolymerization and degree of conversion (DC) of bulk fill and conventional resin composite using continuous high- and soft-start mode. Materials and Methods: In this in-vitro study, Cl I cavities with a dimension of 4 mm × 4 mm × 4 mm and remaining dentin thickness of 1 mm were prepared on 56 extracted human molars. The temperature rise during the light curing of conventional resin composite (Tetric N Ceram, Ivoclar Vivadent) by incremental filling technique and bulk-fill resin composite (Tetric N Ceram Bulk Fill, Ivoclar Vivadent) by bulk-filling technique were measured with a K-type thermocouple wire. DC of both resin composites was measured using Fourier-transform infrared spectroscopy. Data were analyzed using one-way ANOVA, Tamhane and Duncan post hoc, two-way ANOVA at the significance level of = 0.05. Results: Photopolymerization temperature rise due to soft start mode and the first layer of conventional composite was higher than continuous high mode and bulk-filling technique, respectively (P < 0.001). DC of conventional resin composite was higher than bulk-fill composite (P < 0.001). Conclusion: Soft-start mode produced higher thermal rise than continuous high mode and conventional resin composite showed higher DC than bulk-fill composite. © 2020 Dental Research Journal | Published by Wolters Kluwer - Medknow.
Related Docs
View other Related Docs
1. The Effect of Pre-Warming and Delayed Irradiation on Marginal Integrity of a Resin-Modified Glass-Ionomer, General Dentistry (2012)
2. Comparison of Color Stability and Fracture Resistance of Two Temporary Fiber-Reinforced Fixed Partial Denture Materials, Dental Research Journal (2019)
3. Effect of Ceramic Thickness on the Polymerization Quality and Film Thickness of Dual-Polymerizing Versus Heated Light-Polymerizing Adhesive Cement, Journal of Prosthetic Dentistry (2024)
4. Effect of Dentin Dehydration and Composite Resin Polymerization Mode on Bond Strength of Two Self-Etch Adhesives, Contemporary Clinical Dentistry (2016)
5. Effect of the Processing Cycle on Dimensional Changes of Heat-Polymerized Denture Base Resins, Dental Research Journal (2015)
6. The Effect of Washing Water Temperature on Resin-Dentin Micro-Shear Bond Strength, Dental Research Journal (2016)
7. Evaluation of Light Curing Distance and Mylar Strips Color on Surface Hardness of Two Different Dental Composite Resins, Open Dentistry Journal (2014)
8. Sealing Ability of Mta and Cem Cement As Root-End Fillings of Human Teeth in Dry, Saliva or Bloodcontaminated Conditions, Iranian Endodontic Journal (2010)
Experts (# of related papers)
View all Related Experts
Pouran Samimi (11)
Sayed Mostafa Mousavinasab (7)
Other Related Docs
9. Comparison of Depth of Cure, Hardness and Heat Generation of Led and High Intensity Qth Light Sources, European Journal of Dentistry (2011)
10. Graphite Application and Different Powers of Neodymium-Doped Yttrium Aluminium Garnet (Nd: Yag) Laser on Dentin Surface Changes: A Scanning Electron Microscopy Study, Journal of Lasers in Medical Sciences (2012)
11. Effect of Surface Treatments on Fracture Resistance of Root Filled Teeth With Bonded Fibre Posts, Dental Traumatology (2014)
12. The Effect of Acrylate-Based Dental Adhesive Solvent Content on Microleakage in Composite Restorations, Dental Research Journal (2016)
13. Effect of Adhesive Resin As a Modeling Liquid on Elution of Resin Composite Restorations, International Journal of Dentistry (2021)
14. Marginal Leakage of Class V Composite Resin Restorations, Dental Hypotheses (2018)
15. Enhancing Adhesive Performance With N, N, N', N'-Tetrakis (2-Pyridyl Methyl) Ethylenediamine Matrix Metalloproteinase Inhibitors: A Comprehensive Study of Degree of Conversion, Microleakage, and Micro-Tensile Bond Strength in Dental Adhesives, Journal of Conservative Dentistry and Endodontics (2025)
16. Marginal Gap, Internal Fit, and Fracture Load of Leucite-Reinforced Ceramic Inlays Fabricated by Cerec Inlab and Hot-Pressed Techniques, Journal of Prosthodontics (2011)
17. Effects of Post Surface Conditioning Before Silanization on Bond Strength Between Fiber Post and Resin Cement, Journal of Advanced Prosthodontics (2013)
18. Comparison of Shear Bond Strength and Enamel Surface Changing Between the Two-Step Etching and Primer and Self-Etch Primer Methods in Rebonding of Orthodontic Brackets: An in Vitro Study, Dental Research Journal (2019)
19. Comparative Evaluation of Effects of Different Surface Treatment Methods on Bond Strength Between Fiber Post and Composite Core, Journal of Advanced Prosthodontics (2012)
20. The Effect of Time and Storage Environment on Dimensional Changes of Acrylic Resin Post Patterns, Open Dentistry Journal (2015)
21. Effect of Phosphoric Acid Etching of Enamel Margins on the Microleakage of a Simplified All-In-One and a Self-Etch Adhesive System, Operative Dentistry (2009)
22. Application of Laser Irradiation for Restorative Treatments, Open Dentistry Journal (2016)
23. Comparison of Clinical and Radiographic Success Between Mta and Biodentine in Pulpotomy of Primary Mandibular Second Molars With Irreversible Pulpitis: A Randomized Double-Blind Clinical Trial, International Journal of Dentistry (2022)
24. Effect of Ceramic Cooling Protocols and Zirconia Coloring on Fracture Load of Zirconia Based Restorations, Dental Research Journal (2018)
25. Influence of Intracanal Irrigants on Coronal Fracture Resistance of Endodontically Treated and Bleached Teeth: An in Vitro Study, Contemporary Clinical Dentistry (2017)
26. Effect of Prewarming And/Or Delayed Light Activation on Resin-Modified Glass Ionomer Bond Strength to Tooth Structures, Operative Dentistry (2012)
27. Adhesion to Er:Yag Laser and Bur Prepared Root and Crown Dentine, Australian Dental Journal (2012)
28. Effect of Bioactive Glass‑Containing Dentin Adhesives on Microshear Bond Strength of Composite Restorations, Dental Research Journal (2023)
29. Bond Strength Evaluation of Ceramic Restorations With Immediate Dentin Sealing: A Systematic Review and Meta-Analysis, Journal of Dentistry (Iran) (2024)
30. Shear Bond Strengths and Morphological Evaluation of Filled and Unfilled Adhesive Interfaces to Enamel and Dentine, International Journal of Dentistry (2012)
31. Comparison of the Microleakage of Mineral Trioxide Aggregate, Calcium-Enriched Mixture Cement, and Biodentine Orthograde Apical Plug, Dental Research Journal (2020)
32. Reconstruction of Natural Smile and Splinting With Natural Tooth Pontic Fiber-Reinforced Composite Bridge, Case Reports in Dentistry (2022)
33. Effects of Ethanol Concentrations of Acrylate Based Dental Adhesives on Microtensile Composite Dentin Bond Strength and Hybrid Layer Structure of a 10 Wt% Polyhedral Oligomeric Silsesquioxane (Poss) Incorporated Bonding Agent, Dental Research Journal (2018)
34. Fracture Toughness of Bleached Enamel: Effect of Applying Three Different Nanobiomaterials by Nanoindentation Test, Contemporary Clinical Dentistry (2016)
35. Resin-Based Ceramic Matrix Composite Materials in Dentistry, Advances in Ceramic Matrix Composites (2014)
36. Effect of Resin-Modified Glass Ionomer Containing Bioactive Glass on the Flexural Strength and Morphology of Demineralized Dentin., Operative dentistry (2013)
37. A Comparative Study of Cervical Composite Restorations Microleakage Using Dental Universal Bonding and Two-Step Self-Etch Adhesive, Journal of Contemporary Dental Practice (2021)
38. Evaluation of Three Restorative Techniques for Primary Anterior Teeth With Extensive Carious Lesions: A 1-Year Clinical Study, Journal of Dentistry for Children (2013)
39. Evaluation of Flexural Strength of Denture-Based Materials Reinforced With Al2o3, Sio2, Tio2, and Zro2 Nanoparticles: A Systematic Review and Meta-Analysis, Gomal Journal of Medical Sciences (2023)
40. Flexural Strength of Interim Resin Materials for Fixed Prosthodontics, Journal of Prosthodontics (2009)
41. A Comparative Study of Fracture Resistance of Endodontically Treated Compromised Teeth With Different Post Systems: An in Vitro Study, Open Dentistry Journal (2023)
42. Soft Tissue Simulant Materials in X-Ray-Based Imaging in Dentomaxillofacial Radiology: A Scoping Review, Oral Radiology (2024)
43. Effects of Rinsing Water Temperature and Preheated Composites on Microleakage of Composite Restorations With Two Bonding Agents, Frontiers in Dentistry (2022)
44. Effect of Calcium Hypochlorite and Sodium Hypochlorite As Root Canal Irrigants on Push-Out Bond Strength of Fiber Post Cemented With Etch-And-Rinse Resin Cement: An in Vitro Study, Frontiers in Dentistry (2021)
45. Comparing the Sealing Properties of Mineral Trioxide Aggregate and an Experimental Ceramic Based Root End Filling Material in Different Environments, Indian Journal of Dental Research (2013)
46. Effects of Calcium Hypochlorite and Sodium Hypochlorite, As Root Canal Irrigants, on the Bond Strength of Glass Fiber Posts Cemented With Self-Adhesive Resin Cement, Frontiers in Dentistry (2019)
47. Influence of Filler Existence on Microleakage of a Self-Etch Adhesive System, Journal of Conservative Dentistry (2014)
48. Pulp Response Following Direct Pulp Capping With Dentin Adhesives and Mineral Trioxide Aggregate; an Animal Study, Iranian Endodontic Journal (2017)
49. Effect of Three Nanobiomaterials on the Surface Roughness of Bleached Enamel, Contemporary Clinical Dentistry (2015)
50. Effect of Thermocycling and Water Storage on Bond Longevity of Two Self-Etch Adhesives, General Dentistry (2013)