Mg-Doped Fluorapatite Nanoparticles-Poly(Ε-Caprolactone) Electrospun Nanocomposite: Microstructure and Mechanical Properties

Isfahan University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):

Share this content! On (X network) By

Mg-Doped Fluorapatite Nanoparticles-Poly(Ε-Caprolactone) Electrospun Nanocomposite: Microstructure and Mechanical Properties Publisher

Fereshteh Z¹ ; Fathi MH^{1, 2} ; Mozaffarinia R¹

Show Affiliations

1. Biomaterials Research Group, Department of Materials Engineering, Isfahan University of Technology, Isfahan 8415683111, Iran
2. Dental Materials Research Center, Isfahan University of Medical Sciences, Isfahan, Iran

Source: Superlattices and Microstructures Published:2014

Abstract

The aim of this study was to prepare and characterize the poly (ε-caprolactone)/Mg-doped fluorapatite nanoparticles (PCL/nMg-FA) nanocomposite electrospun scaffolds. The effect of solvent type on distribution of nanoparticles and mechanical properties of the scaffolds was also investigated. The optimized nanofibrous scaffold was obtained by 5 wt.% nMg-FA while its tensile strength and elastic modules were significantly enhanced compered to PCL scaffolds. It is noteworthy that no surfactant was used in present study. The Mg-FA nanoparticles were homogeneously dispersed in the nanofibers and prepared scaffolds without any agglomeration. © 2014 Elsevier Ltd. All rights reserved.reserved.

Related Docs

View other Related Docs

1. Implementing Taguchi Method to Analyze Electrospinning Parameters Influence on Mg-Doped Fluorapatite Nanoparticles-Poly (Ε-Caprolactone) Nanocomposite Scaffold (Mg-Fa Nps/Pcl) Properties, Polymers for Advanced Technologies (2020)

2. A Ternary Nanocomposite Fibrous Scaffold Composed of Poly(Ε-Caprolactone)/Gelatin/Gehlenite (Ca2al2sio7): Physical, Chemical, and Biological Properties in Vitro, Polymers for Advanced Technologies (2021)

3. The Effect of Different Solvent Systems on Physical Properties of Electrospun Poly(Glycerol Sebacate)/Poly(E-Caprolactone) Blend, Polymer-Plastics Technology and Materials (2022)

4. Formulation of Electrospun Mg-Fa/Poly (Ε-Caprolactone) Nanocomposite to Adjust Bioactivity, Biodegradability, and Cellular Interactions, Polymers for Advanced Technologies (2021)

5. Incorporation of Multi-Walled Carbon Nanotubes Into Electrospun Pcl/Gelatin Scaffold: The Influence on the Physical, Chemical and Thermal Properties and Cell Response for Tissue Engineering, Materials Technology (2020)

6. Electrospun Polycaprolactone/Lignin-Based Nanocomposite As a Novel Tissue Scaffold for Biomedical Applications, Journal of Medical Signals and Sensors (2017)

7. Evaluation of the Effects of Keratin on Physical, Mechanical and Biological Properties of Poly (3-Hydroxybutyrate) Electrospun Scaffold: Potential Application in Bone Tissue Engineering, European Polymer Journal (2020)

8. Novel Electrospun Polyurethane Scaffolds Containing Bioactive Glass Nanoparticles, Bioinspired, Biomimetic and Nanobiomaterials (2020)

Experts (# of related papers)

View all Related Experts

Saeed Karbasi (73)

Mohammad Rafienia (35)

Other Related Docs

9. Hybrid Nano-Micro Scaffolds for Cartilage Tissue Engineering: Integrating Pcl-Dwjm-Mwcnts on Chemically Modified Silk Fibroin, Journal of Polymers and the Environment (2025)

10. Ultra-Thin Electrospun Nanocomposite Scaffold of Poly (3-Hydroxybutyrate)-Chitosan/Magnetic Mesoporous Bioactive Glasses for Bone Tissue Engineering Applications, International Journal of Biological Macromolecules (2024)

11. The Electrospun Poly(Ε-Caprolactone)/Fluoridated Hydroxyapatite Nanocomposite for Bone Tissue Engineering, Polymers for Advanced Technologies (2020)

12. Polyhydroxybutyrate-Starch/Carbon Nanotube Electrospun Nanocomposite: A Highly Potential Scaffold for Bone Tissue Engineering Applications, International Journal of Biological Macromolecules (2022)

13. Evaluation of Pcl/Chitosan Electrospun Nanofibers for Liver Tissue Engineering, International Journal of Polymeric Materials and Polymeric Biomaterials (2017)

14. Evaluation of the Structural Properties and Cellular Behavior of Electrospun Poly(Hydroxybutyrate)/Chitosan Blend Scaffolds for Cartilage Tissue Engineering, Journal of Isfahan Medical School (2015)

15. Evaluation of Mg63 Cells Behavior With Electrospun Nanocomposite Scaffolds of Polycaprolactone and Carbon Quantum Dot Containing Captopril for Bone Tissue Engineering, Journal of Knowledge and Health in Basic Medical Sciences (2020)

16. Fabrication and Characterization of 3D-Printed Antibacterial Bioactive Glass /Polycaprolactone Nanocomposite Scaffolds, Journal of Polymers and the Environment (2024)

17. Effects of Surface Modification on the Mechanical and Structural Properties of Nanofibrous Poly(Ε-Caprolactone)/Forsterite Scaffold for Tissue Engineering Applications, Materials Science and Engineering C (2013)

18. Adipose-Derived Stem Cells Growth and Proliferation Enhancement Using Poly (Lactic-Co-Glycolic Acid) (Plga)/Fibrin Nanofiber Mats, Journal of Applied Biotechnology Reports (2021)

19. The Thickness of Electrospun Poly (Ε-Caprolactone Nanofibrous Scaffolds Influences Cell Proliferation, International Journal of Artificial Organs (2009)

20. Incorporation of Mesoporous Silica Nanoparticles Into Random Electrospun Plga and Plga/Gelatin Nanofibrous Scaffolds Enhances Mechanical and Cell Proliferation Properties, Materials Science and Engineering C (2016)

21. Effects of Nano-Bioactive Glass on Structural, Mechanical and Bioactivity Properties of Poly (3-Hydroxybutyrate) Electrospun Scaffold for Bone Tissue Engineering Applications, Materials Technology (2019)

22. Evaluating the Osteogenic Properties of Polyhydroxybutyrate-Zein/Multiwalled Carbon Nanotubes (Mwcnts) Electrospun Composite Scaffold for Bone Tissue Engineering Applications, International Journal of Biological Macromolecules (2024)

23. Zn-Substituted Mg2sio4 Nanoparticles-Incorporated Pcl-Silk Fibroin Composite Scaffold: A Multifunctional Platform Towards Bone Tissue Regeneration, Materials Science and Engineering C (2021)

24. Generation of Pgs/Pcl Blend Nanofibrous Scaffolds Mimicking Corneal Stroma Structure, Macromolecular Materials and Engineering (2014)

25. Characterization of Poly(Ε-Caprolactone)/Extracellular Matrix Nanofibers Composite Scaffold for Tissue Engineering, Journal of Isfahan Medical School (2019)

26. In Vitro Studies of Polycaprolactone Nanofibrous Scaffolds Containing Novel Gehlenite Nanoparticles, Journal of Medical Signals and Sensors (2021)

27. Incorporation of Nanohydroxyapatite and Vitamin D3 Into Electrospun Pcl/Gelatin Scaffolds: The Influence on the Physical and Chemical Properties and Cell Behavior for Bone Tissue Engineering, Polymers for Advanced Technologies (2018)

28. Tunable Cellular Interactions and Physical Properties of Nanofibrous Pcl-Forsterite: Gelatin Scaffold Through Sequential Electrospinning, Composites Science and Technology (2013)

29. Fabrication and Characterization of 3D-Printed Composite Scaffolds of Coral-Derived Hydroxyapatite Nanoparticles/Polycaprolactone/Gelatin Carrying Doxorubicin for Bone Tissue Engineering, Journal of Materials Science: Materials in Medicine (2024)

30. Plasma Surface Modification of Electrospun Polyhydroxybutyrate (Phb) Nanofibers to Investigate Their Performance in Bone Tissue Engineering, International Journal of Biological Macromolecules (2023)

31. Nano/Micro Hybrid Scaffold of Pcl or P3hb Nanofibers Combined With Silk Fibroin for Tendon and Ligament Tissue Engineering, Journal of Applied Biomaterials and Functional Materials (2015)

32. Fabrication and Characterization of Chitosan-Gelatin/Single-Walled Carbon Nanotubes Electrospun Composite Scaffolds for Cartilage Tissue Engineering Applications, Polymers for Advanced Technologies (2022)

33. Preparation and Characterization of Poly Ε-Caprolactone-Gelatin/Multi-Walled Carbon Nanotubes Electrospun Scaffolds for Cartilage Tissue Engineering Applications, International Journal of Polymeric Materials and Polymeric Biomaterials (2020)

34. Preparation of Fibrin/Poly Vinyl Alcohol Electrospun Nanofibers Scaffold for Tissue Engineering Applications, Journal of Isfahan Medical School (2016)

35. Characterization and Biological Evaluation of New Plga/Fibrin/Lignin Biocomposite Electrospun Scaffolds, Physica Scripta (2023)

36. Cytocompatibility and Antibacterial Properties of Coaxial Electrospun Nanofibers Containing Ciprofloxacin and Indomethacin Drugs, Polymers (2022)

37. Effects of Multi-Wall Carbon Nano-Tubes (Mwnts) on Structural and Mechanical Properties of Electrospun Poly(3-Hydroxybutyrate) Scaffold for Tissue Engineering Applications, Scientia Iranica (2016)

38. Novel Electrospun Polyvinyl Alcohol/Chitosan/Polycaprolactone-Diltiazem Hydrochloride Nanocomposite Membranes for Wound Dressing Applications, Emergent Materials (2024)

39. Synthetic Electrospun Nanofibers As a Supportive Matrix in Osteogenic Differentiation of Induced Pluripotent Stem Cells, Journal of Biomaterials Science, Polymer Edition (2022)

40. Preparation of a Novel Biodegradable Nanocomposite Scaffold Based on Poly (3-Hydroxybutyrate)/Bioglass Nanoparticles for Bone Tissue Engineering, Journal of Materials Science: Materials in Medicine (2010)

41. Preparation and Characterization of 3D Nanocomposite Scaffold From Bioactive Glass/Β-Tricalcium Phosphate Via Robocasting Method for Bone Tissue Engineering, Journal of Non-Crystalline Solids (2022)

42. Evaluation of the Effects of Chitosan Nanoparticles on Polyhydroxy Butyrate Electrospun Scaffolds for Cartilage Tissue Engineering Applications, International Journal of Biological Macromolecules (2023)

43. Preparation and Characterization of Aligned Porous Pcl/Zein Scaffolds As Drug Delivery Systems Via Improved Unidirectional Freeze-Drying Method, Materials Science and Engineering C (2016)

44. Physical and Mechanical Properties of a Poly-3-Hydroxybutyratecoated Nanocrystalline Hydroxyapatite Scaffold for Bone Tissue Engineering, Journal of Porous Materials (2012)

45. Polycaprolactone-Chitosan/Multi-Walled Carbon Nanotube: A Highly Strengthened Electrospun Nanocomposite Scaffold for Cartilage Tissue Engineering, International Journal of Biological Macromolecules (2022)

46. Incorporation of Inorganic Bioceramics Into Electrospun Scaffolds for Tissue Engineering Applications: A Review, Ceramics International (2022)

47. Effect of Mg Content on the Bioactivity and Biocompatibility of Mg-Substituted Fluorapatite Nanopowders Fabricated Via Mechanical Activation, Materials Science and Engineering C (2016)

48. Development of Electrospun Poly (Vinyl Alcohol)-Based Bionanocomposite Scaffolds for Bone Tissue Engineering, Journal of Biomedical Materials Research - Part A (2018)

49. Evaluation of the Effects of Zein Incorporation on Physical, Mechanical, and Biological Properties of Polyhydroxybutyrate Electrospun Scaffold for Bone Tissue Engineering Applications, International Journal of Biological Macromolecules (2023)

50. Platelet Rich Fibrin Containing Nanofibrous Dressing for Wound Healing Application: Fabrication, Characterization and Biological Evaluations, Materials Science and Engineering C (2021)

Style	Citing Format
MLA	Fereshteh Z, Fathi MH, Mozaffarinia R. "Mg-Doped Fluorapatite Nanoparticles-Poly(Ε-Caprolactone) Electrospun Nanocomposite: Microstructure and Mechanical Properties." Superlattices and Microstructures, vol. 75, no. , 2014, pp. 208-221.
APA	Fereshteh Z, Fathi MH, Mozaffarinia R (2014). Mg-Doped Fluorapatite Nanoparticles-Poly(Ε-Caprolactone) Electrospun Nanocomposite: Microstructure and Mechanical Properties. Superlattices and Microstructures, 75(), 208-221.
Chicago	Fereshteh Z, Fathi MH, Mozaffarinia R. "Mg-Doped Fluorapatite Nanoparticles-Poly(Ε-Caprolactone) Electrospun Nanocomposite: Microstructure and Mechanical Properties." Superlattices and Microstructures 75, no. (2014): 208-221.
Harvard	Fereshteh Z, Fathi MH, Mozaffarinia R (2014) 'Mg-Doped Fluorapatite Nanoparticles-Poly(Ε-Caprolactone) Electrospun Nanocomposite: Microstructure and Mechanical Properties', Superlattices and Microstructures, 75(), pp. 208-221.
Vancouver	Fereshteh Z, Fathi MH, Mozaffarinia R. Mg-Doped Fluorapatite Nanoparticles-Poly(Ε-Caprolactone) Electrospun Nanocomposite: Microstructure and Mechanical Properties. Superlattices and Microstructures. 2014;75():208-221.
BibTex	@article{ author = {Fereshteh Z and Fathi MH and Mozaffarinia R}, title = {Mg-Doped Fluorapatite Nanoparticles-Poly(Ε-Caprolactone) Electrospun Nanocomposite: Microstructure and Mechanical Properties}, journal = {Superlattices and Microstructures}, volume = {75}, number = {}, pages = {208-221}, year = {2014} }
RIS	TY - JOUR AU - Fereshteh Z AU - Fathi MH AU - Mozaffarinia R TI - Mg-Doped Fluorapatite Nanoparticles-Poly(Ε-Caprolactone) Electrospun Nanocomposite: Microstructure and Mechanical Properties JO - Superlattices and Microstructures VL - 75 IS - SP - 208 EP - 221 PY - 2014 ER -