Isfahan University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Share this content! On (X network) By
Comparison the Effects of Chitosan and Hyaluronic Acid-Based Thermally Sensitive Hydrogels Containing Rosuvastatin on Human Osteoblast-Like Mg-63 Cells Publisher



Akbari V1 ; Rezazadeh M2 ; Ebrahimi Z2
Authors
Show Affiliations
Authors Affiliations
  1. 1. Department of Pharmaceutical Biothenology, Isfahan Pharmaceutical Research Center, School of Pharmacy and Pharmaceutical Sciences, Isfahan University of Medical Sciences, Isfahan, Iran
  2. 2. Department of Pharmaceutics and Novel Drug Delivery System Research Center, School of Pharmacy and Pharmaceutical Sciences, Isfahan University of Medical Sciences, Isfahan, Iran

Source: Research in Pharmaceutical Sciences Published:2020


Abstract

Background and purpose: Bone regeneration can be accelerated by localized delivery of statins. Here, we aimed to evaluate the effect of two thermosensitive hydrogels containing rosuvastatin (RSV) on proliferation and differentiation of human osteoblast-like MG-63 cells. Experimental approach: Firstly, chitosan (CTS)/glycerophosphate (GP)/gelatin (G) thermosensitive hydrogel was prepared and characterized based on rheological properties, in vitro erosion, and release pattern of RSV and then the optimized mixture was loaded with nanoparticles containing RSV(NRSV). Secondly, the effect of NRSV-embedded in CTS/GP/G on cell viability, alkaline phosphate activity, and cell calcification was evaluated using MG-63 cells and compared with RSV-embedded into hyaluronic acid (HA)/Pluronic® F127 (PF127) hydrogel. Findings/Results: CTS/GP mixtures with 1 and 1.5 % gelatin existing in solution with low viscosity at 4 °C were solidified at 32-34 °C while the mixture containing 2% gelatin was jellified at room temperature. The gelation times of CTS/GP/G with 1 and 1.5% gelatin were 72 and 44 s, respectively. The hydrogel containing 3% w/v NRSV was also converted to a semisolid upon increasing the temperature to 33-36 °C. Due to the higher gel strength of CTS/GP/G compared to HA/PF127 hydrogel, the release rate of RSV from the NRSV-embedded CTS/GP/G hydrogel was significantly slower than that of HA/PF127 system. As revealed by alkaline phosphatase and mineralization assays, NRSV-embedded in CTS/GP/G hydrogel had the most promotive effect on differentiation of osteoblasts among other mixtures. Conclusion and implication: NRSV-embedded in CTS/GP/G hydrogel could be efficiently used in the future for bone defects such as osteoporosis and bone fractures. © 2020 Wolters Kluwer Medknow Publications. All rights reserved.
Related Docs
View other Related Docs
1. Incorporation of Rosuvastatin-Loaded Chitosan/Chondroitin Sulfate Nanoparticles Into a Thermosensitive Hydrogel for Bone Tissue Engineering: Preparation, Characterization, and Cellular Behavior, Pharmaceutical Development and Technology (2019)
2. A Forsterite-Reinforced Polypropylene Fumarate/Methoxy Polyethylene Glycol-Hydrogel Enriched With Flavonoid Nanoparticles Enhances Osteoconductivity, Materials Advances (2024)
3. Effect of Bassorin (Derived From Gum Tragacanth) and Halloysite Nanotubes on Physicochemical Properties and the Osteoconductivity of Methylcellulose-Based Injectable Hydrogels, International Journal of Biological Macromolecules (2021)
4. Polyhedral Oligomeric Silsesquioxane /Platelets Rich Plasma/Gelrite-Based Hydrogel Scaffold for Bone Tissue Engineering, Current Pharmaceutical Design (2020)
5. Calcitonin-Loaded Octamaleimic Acid–Silsesquioxane Nanoparticles in Hydrogel Scaffold Support Osteoinductivity in Bone Regeneration, Pharmaceutical Development and Technology (2021)
6. An Injectable Thermosensitive Hydrogel/Nanomicelles Composite for Local Chemo-Immunotherapy in Mouse Model of Melanoma, Journal of Biomaterials Applications (2022)
7. An Injectable Carboxymethyl Chitosan-Methylcellulose-Pluronic Hydrogel for the Encapsulation of Meloxicam Loaded Nanoparticles, International Journal of Biological Macromolecules (2020)
8. Thermo-Responsive Hydrogels Based on Methylcellulose/Persian Gum Loaded With Taxifolin Enhance Bone Regeneration: An in Vitro/In Vivo Study, Cellulose (2022)
Experts (# of related papers)
View all Related Experts
Batool Hashemibeni (28)
Jaleh Varshosaz (24)
Other Related Docs
9. Osteoconductive Visible Light-Crosslinkable Nanocomposite for Hard Tissue Engineering, Colloids and Surfaces A: Physicochemical and Engineering Aspects (2022)
10. Fabrication and Characterization of Polyphosphazene/Calcium Phosphate Scaffolds Containing Chitosan Microspheres for Sustained Release of Bone Morphogenetic Protein 2 in Bone Tissue Engineering, Tissue Engineering and Regenerative Medicine (2017)
11. Preparation and in Vitro Evaluation of Novel Cross-Linked Chondroitin Sulphate Nanoparticles by Aluminium Ions for Encapsulation of Green Tea Flavonoids, IET Nanobiotechnology (2018)
12. 3D-Printed Bioactive Chitosan/Alginate /Hardystonite Scaffold for Bone Tissue Engineering: Synthesis and Characterization, Journal of Non-Crystalline Solids (2023)
13. Injectable Natural Polymer Compound for Tissue Engineering of Intervertebral Disc: In Vitro Study, Materials Science and Engineering C (2017)
14. Fabrication and Characterization of Injectable Thermosensitive Hydrogel Containing Dipyridamole Loaded Polycaprolactone Nanoparticles for Bone Tissue Engineering, Journal of Drug Delivery Science and Technology (2021)
15. Local Delivery of Usnic Acid Loaded Rhamnolipid Vesicles by Gelatin / Tragacanth Gum / Montmorillonite/ Vanillin Cryogel Scaffold for Expression of Osteogenic Biomarkers and Antimicrobial Activity, Journal of Drug Delivery Science and Technology (2022)
16. Polycaprolactone/Gelatin/Hydroxyapatite Nanocomposite Scaffold Seeded With Stem Cells From Human Exfoliated Deciduous Teeth to Enhance Bone Repair: In Vitro and in Vivo Studies, Materials Technology (2022)
17. Fabrication and Characterization of 3D-Printed Composite Scaffolds of Coral-Derived Hydroxyapatite Nanoparticles/Polycaprolactone/Gelatin Carrying Doxorubicin for Bone Tissue Engineering, Journal of Materials Science: Materials in Medicine (2024)
18. Mg2+Substituted Calcium Phosphate Nano Particles Synthesis for Non Viral Gene Delivery Application, Journal of Materials Science: Materials in Medicine (2010)
19. Evaluation Avocado Soybean Unsaponifiables Loaded in Poly (Lactic-Co-Glycolic) Acid/Avocado Soybean Unsaponifiables-Fibrin Nanoparticles Scaffold (New Delivery System) Is an Effective Factor for Tissue Engineering, Advanced Biomedical Research (2021)
20. Sustained-Release of Erythropoietin Using a Novel Injectable Thermosensitive Hydrogel: In Vitro Studies, Biological Activity, and Efficacy in Rats, Pharmaceutical Development and Technology (2021)
21. A New Approach to Fabrication of Cs/Bg/Cnt Nanocomposite Scaffold Towards Bone Tissue Engineering and Evaluation of Its Properties, Applied Surface Science (2015)
22. The Beneficial Effect of Encapsulated Human Adipose-Derived Stem Cells in Alginate Hydrogel on Neural Differentiation, Journal of Biomedical Materials Research - Part B Applied Biomaterials (2014)
23. Poly (Glycerol Sebacate) and Polyhydroxybutyrate Electrospun Nanocomposite Facilitates Osteogenic Differentiation of Mesenchymal Stem Cells, Journal of Drug Delivery Science and Technology (2021)
24. Nanobiomaterials in Periodontal Tissue Engineering, Nanobiomaterials in Hard Tissue Engineering: Applications of Nanobiomaterials (2016)
25. Modification of Porous Calcium Phosphate Surfaces With Different Geometries of Bioactive Glass Nanoparticles, Materials Science and Engineering C (2012)
26. Preparation and Bioactivity Evaluation of Bone-Like Hydroxyapatite Nanopowder, Journal of Materials Processing Technology (2008)
27. A Modular Approach to 3D-Printed Bilayer Composite Scaffolds for Osteochondral Tissue Engineering, Journal of Materials Science: Materials in Medicine (2024)
28. Antibacterial Amorphous Magnesium Phosphate/Graphene Oxide for Accelerating Bone Regeneration, Biomaterials Advances (2022)
29. Highly Porous 3D Printed Scaffold Incorporated With Graphene Oxide-Merwinite and Coated With Igf1 Loaded Nanofibers for Calvarial Defect Repair, Journal of Polymers and the Environment (2024)
30. Sodium Alginate/Magnesium Oxide Nanocomposite Scaffolds for Bone Tissue Engineering, Polymers for Advanced Technologies (2018)
31. Incorporation of Nanohydroxyapatite and Vitamin D3 Into Electrospun Pcl/Gelatin Scaffolds: The Influence on the Physical and Chemical Properties and Cell Behavior for Bone Tissue Engineering, Polymers for Advanced Technologies (2018)
32. Biodegradable Nanocomposite Coatings Accelerate Bone Healing: In Vivo Evaluation, Dental Research Journal (2015)
33. A Novel Flexible, Conductive, and Three-Dimensional Reduced Graphene Oxide/Polyurethane Scaffold for Cell Attachment and Bone Regeneration, Materials and Design (2022)
34. Regeneration of Rat Sciatic Nerve Using Plga Conduit Containing Rat Adscs With Controlled Release of Bdnf and Gold Nanoparticles, Journal of Molecular Neuroscience (2021)
35. Histopathological Comparison Between Bone Marrow- and Periodontium-Derived Stem Cells for Bone Regeneration in Rabbit Calvaria, International Journal of Organ Transplantation Medicine (2016)
36. Synthetic Electrospun Nanofibers As a Supportive Matrix in Osteogenic Differentiation of Induced Pluripotent Stem Cells, Journal of Biomaterials Science, Polymer Edition (2022)
37. Controlled Gentamicin- Strontium Release As a Dual Action Bone Agent: Combination of the Porous Titanium Scaffold and Biodegradable Polymers, Journal of Alloys and Compounds (2017)
38. Preparation and Characterization of 3D Nanocomposite Scaffold From Bioactive Glass/Β-Tricalcium Phosphate Via Robocasting Method for Bone Tissue Engineering, Journal of Non-Crystalline Solids (2022)
39. The Characteristics of Human Osteoblast Cells in Two Methods of Monolayer Culture in Hydroxyapatite-Tricalcium Phosphate Scafolds, Journal of Isfahan Medical School (2011)
40. Chondrogenesis of Mesenchymal Stromal Cells on the 3D Printed Polycaprolactone/Fibrin/Decellular Cartilage Matrix Hybrid Scaffolds in the Presence of Piascledine, Journal of Biomaterials Science, Polymer Edition (2024)
41. Evaluation of the Effects of Chitosan Nanoparticles on Polyhydroxy Butyrate Electrospun Scaffolds for Cartilage Tissue Engineering Applications, International Journal of Biological Macromolecules (2023)
42. Synthesis, Characterization, in Vitro Bioactivity and Biocompatibility Evaluation of Hydroxyapatite/Bredigite (Ca7mgsi4o16) Composite Nanoparticles, JOM (2016)
43. Comparative Evaluation of Hydroxyapatite and Nano-Bioglass in Two Forms of Conventional Micro-And Nano-Particles in Repairing Bone Defects (An Animal Study), Indian Journal of Dental Research (2015)
44. In Vivo and in Vitro Evaluation of Poly (Lactide-Co-Glycolide)/Bioactive Glass Nanocomposite Coating, Advanced Materials Research (2014)
45. Fabrication and Characterization of Polycaprolactone Fumarate/Gelatin-Based Nanocomposite Incorporated With Silicon and Magnesium Co-Doped Fluorapatite Nanoparticles Using Electrospinning Method, Materials Science and Engineering C (2020)
46. In Vitro Studies of Polycaprolactone Nanofibrous Scaffolds Containing Novel Gehlenite Nanoparticles, Journal of Medical Signals and Sensors (2021)
47. Metformin-Loaded Pcl/Pva Fibrous Scaffold Preseeded With Human Endometrial Stem Cells for Effective Guided Bone Regeneration Membranes, ACS Biomaterials Science and Engineering (2021)
48. Effects of Cartilage Acellular Solubilised Ecm on Physicomechanical and Biological Properties of Polycaprolactone/Fibrin Hybrid Scaffold Fabricated by 3D-Printing and Salt-Leaching Methods, Materials Technology (2022)
49. Design and Optimization of Alginate-Chitosan-Pluronic Nanoparticles As a Novel Meloxicam Drug Delivery System, Journal of Applied Polymer Science (2015)
50. Enhancing the Biological Characteristics of Aminolysis Surface-Modified 3D Printed Nanocomposite Polycaprolactone/Nanohydroxyapatite Scaffold Via Gelatin Biomacromolecule Immobilization: An in Vitro and in Vivo Study, Colloids and Surfaces B: Biointerfaces (2025)