Isfahan University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Share this content! On (X network) By
Application of 3D Bioprinters for Dental Pulp Regeneration and Tissue Engineering (Porous Architecture) Publisher



Iranmanesh P1 ; Ehsani A2 ; Khademi A1 ; Asefnejad A2 ; Shahriari S3 ; Soleimani M2 ; Ghadiri Nejad M4 ; Sabersamandari S5 ; Khandan A5
Authors
Show Affiliations
Authors Affiliations
  1. 1. Department of Endodontics, Dental Research Center, Dental Research Institute, School of Dentistry, Isfahan University of Medical Sciences, Isfahan, Iran
  2. 2. Department of Biomedical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
  3. 3. Institute of Psychiatry, Psychology and Neuroscience, Kings College London, London, United Kingdom
  4. 4. Industrial Engineering Department, Girne American University, Via Mersin 10, TRNC, Kyrenia, Turkey
  5. 5. New Technologies Research Center, Amirkabir University of Technology, Tehran, 15875-4413, Iran

Source: Transport in Porous Media Published:2022


Abstract

One of the well-known ways to produce porous scaffolds or special three-dimensional (3D) micro-nanostructures is using the 3D printing technique. This technique requires a suitable computerized model of the scaffold using computer-aided design software or the computed tomography. The 3D printer fabricates a product by using a digital file and creates a layer-by-layer physical sample. Integrating different technologies and materials into one operational procedure can produce 3D tissue engineering scaffolds with enhanced properties. There are different tissue engineering strategies, including cell-based, factor-based, and scaffold-based strategies. In scaffold-based tissue engineering, 3D scaffolds are one of the most important applications of 3D printers, especially in medical science. In this article, a review of 3D printers, suitable for the production of soft and hard tissue engineering with different technologies is performed and several 3D printing techniques are described. Moreover, the pros and cons, and limitations of the 3D printing technique are discussed. © 2021, The Author(s), under exclusive licence to Springer Nature B.V.
Related Docs
View other Related Docs
1. Effect of Calcium Silicate Nanoparticle on Surface Feature of Calcium Phosphates Hybrid Bio-Nanocomposite Using for Bone Substitute Application, Powder Technology (2020)
2. Synthesize and Characterization of a Novel Cadmium Selenide Nanoparticle With Iron Precursor Applicable in Hyperthermia of Cancer Cells, International Journal of Nanoscience and Nanotechnology (2021)
3. A Femoral Shape Porous Scaffold Bio-Nanocomposite Fabricated Using 3D Printing and Freeze-Drying Technique for Orthopedic Application, Materials Chemistry and Physics (2022)
4. Investigation of the Mechanical Properties of a Bony Scaffold for Comminuted Distal Radial Fractures: Addition of Akermanite Nanoparticles and Using a Freeze-Drying Technique, Journal of the Mechanical Behavior of Biomedical Materials (2021)
5. Development and Investigation of Novel Alginate-Hyaluronic Acid Bone Fillers Using Freeze Drying Technique for Orthopedic Field, Nanomedicine Research Journal (2020)
6. A Porous Polymeric–Hydroxyapatite Scaffold Used for Femur Fractures Treatment: Fabrication, Analysis, and Simulation, European Journal of Orthopaedic Surgery and Traumatology (2020)
7. Bioprinting of Three-Dimensional Scaffold Based on Alginate-Gelatin As Soft and Hard Tissue Regeneration, Journal of Materials Research and Technology (2021)
8. Nanostructure, Molecular Dynamics Simulation and Mechanical Performance of Pcl Membranes Reinforced With Antibacterial Nanoparticles, Journal of Applied and Computational Mechanics (2021)
Experts (# of related papers)
View all Related Experts
Saeed Karbasi (40)
Mohammad Rafienia (23)
Other Related Docs
9. Recent Trends in Three-Dimensional Bioinks Based on Alginate for Biomedical Applications, Materials (2020)
10. Improvement in Osseointegration of Tricalcium Phosphate-Zircon for Orthopedic Applications: An in Vitro and in Vivo Evaluation, Medical and Biological Engineering and Computing (2020)
11. An Artificial Soft Tissue Made of Nano-Alginate Polymer Using Bioxfab 3D Bioprinter for Treatment of Injuries, Nanochemistry Research (2020)
12. The Journey of Multifunctional Bone Scaffolds Fabricated From Traditional Toward Modern Techniques, Bio-Design and Manufacturing (2020)
13. Therapy With New Generation of Biodegradable and Bioconjugate 3D Printed Artificial Gastrointestinal Lumen, Iranian Journal of Basic Medical Sciences (2021)
14. Fabrication and Finite Element Simulation of 3D Printed Poly L-Lactic Acid Scaffolds Coated With Alginate/Carbon Nanotubes for Bone Engineering Applications, International Journal of Biological Macromolecules (2023)
15. Physical, Mechanical, and Biological Performance of Chitosan-Based Nanocomposite Coating Deposited on the Polycaprolactone-Based 3D Printed Scaffold: Potential Application in Bone Tissue Engineering, International Journal of Biological Macromolecules (2023)
16. Fabrication and Finite Element Simulation of Antibacterial 3D Printed Poly L-Lactic Acid Scaffolds Coated With Alginate/Magnesium Oxide for Bone Tissue Regeneration, International Journal of Biological Macromolecules (2023)
17. Development of Porous Photopolymer Resin-Swcnt Produced by Digital Light Processing Technology Using for Bone Femur Application, Archives of Bone and Joint Surgery (2021)
18. A Brief Review of Hydrogels for Drug Delivery for Different Organs of the Body: Synthesis, Categorization, and Organ-Specific Applications, Nanochemistry Research (2024)
19. Investigation the Mechanical Properties of a Novel Multicomponent Scaffold Coated With a New Bio-Nanocomposite for Bone Tissue Engineering: Fabrication, Simulation and Characterization, Journal of Materials Research and Technology (2021)
20. Examining the Diagnostic Accuracy of Interproximal Chemical Caries Using X-Ray and Artificial Neural Network (Ann) Modeling, Nanochemistry Research (2025)
21. 3-Dimensional Printing of Hydrogel-Based Nanocomposites: A Comprehensive Review on the Technology Description, Properties, and Applications, Advanced Engineering Materials (2021)
22. Investigation of Addition of Calcium Phosphate Ceramic to Multilayer Scaffold for Bone Applications With Improved Mechanical Properties: Fuzzy Logic Analysis, Ceramics International (2023)
23. Pcl/Agarose 3D-Printed Scaffold for Tissue Engineering Applications: Fabrication, Characterization, and Cellular Activities, Research in Pharmaceutical Sciences (2023)
24. 3D Printing of Bionanocomposites and Their Broad Spectrum of Applications, Advances in Bionanocomposites: Materials, Applications, and Life Cycle (2023)
25. Bioprinting Via a Dual-Gel Bioink Based on Poly(Vinyl Alcohol) and Solubilized Extracellular Matrix Towards Cartilage Engineering, International Journal of Molecular Sciences (2021)
26. Extracellular Matrix Coated Three-Dimensional-Printed Polycaprolactone Scaffolds Containing Curcumin for Cartilage Tissue Engineering Applications, Journal of Bioactive and Compatible Polymers (2024)
27. A 3D Printed Polylactic Acid-Baghdadite Nanocomposite Scaffold Coated With Microporous Chitosan-Vegf for Bone Regeneration Applications, Carbohydrate Polymers (2023)
28. An Artificial Blood Vessel Fabricated by 3D Printing for Pharmaceutical Application, Nanomedicine Journal (2019)
29. Nanobiomaterials in Periodontal Tissue Engineering, Nanobiomaterials in Hard Tissue Engineering: Applications of Nanobiomaterials (2016)
30. Synergetic Effect of Bioglass and Nano Montmorillonite on 3D Printed Nanocomposite of Polycaprolactone/Gelatin in the Fabrication of Bone Scaffolds, International Journal of Biological Macromolecules (2024)
31. The Story of Nanoparticles in Differentiation of Stem Cells Into Neural Cells, Neurochemical Research (2019)
32. Administration of Stem Cells Against Cardiovascular Diseases With a Focus on Molecular Mechanisms: Current Knowledge and Prospects, Tissue and Cell (2023)
33. Three-Dimensional Printing Constructs Based on the Chitosan for Tissue Regeneration: State of the Art, Developing Directions and Prospect Trends, Materials (2020)
34. Biomimetic Vegf-Loaded Bilayer Scaffold Fabricated by 3D Printing and Electrospinning Techniques for Skin Regeneration, Materials and Design (2024)
35. Organoid Technology: Current Standing and Future Perspectives, Stem Cells (2021)
36. Bioprinted Membranes for Corneal Tissue Engineering: A Review, Pharmaceutics (2022)
37. Morphology and Degradation of Poly (3-Hydroxybutyrate)/ Nano-Hydroxyapatite Scaffold Used in Tissue Engineering, Journal of Isfahan Medical School (2012)
38. Keratin-Containing Scaffolds for Tissue Engineering Applications: A Review, Journal of Biomaterials Science, Polymer Edition (2024)
39. Physicomechanical and Cellular Behavior of 3D Printed Polycaprolactone/Poly(Lactic-Co-Glycolic Acid) Scaffold Containing Polyhedral Oligomeric Silsesquioxane and Extracellular Matrix Nanoparticles for Cartilage Tissue Engineering, Polymers for Advanced Technologies (2022)
40. Preparation and Mechanical Behavior of Plga/Nano-Bcp Composite Scaffolds During In-Vitro Degradation for Bone Tissue Engineering, Polymer Degradation and Stability (2011)
41. Synthetic Electrospun Nanofibers As a Supportive Matrix in Osteogenic Differentiation of Induced Pluripotent Stem Cells, Journal of Biomaterials Science, Polymer Edition (2022)
42. A Modular Approach to 3D-Printed Bilayer Composite Scaffolds for Osteochondral Tissue Engineering, Journal of Materials Science: Materials in Medicine (2024)
43. Fabrication and Characterization of 3D-Printed Composite Scaffolds of Coral-Derived Hydroxyapatite Nanoparticles/Polycaprolactone/Gelatin Carrying Doxorubicin for Bone Tissue Engineering, Journal of Materials Science: Materials in Medicine (2024)
44. Effects of Cartilage Acellular Solubilised Ecm on Physicomechanical and Biological Properties of Polycaprolactone/Fibrin Hybrid Scaffold Fabricated by 3D-Printing and Salt-Leaching Methods, Materials Technology (2022)
45. Characterization of Poly(Ε-Caprolactone)/Extracellular Matrix Nanofibers Composite Scaffold for Tissue Engineering, Journal of Isfahan Medical School (2019)
46. Does the Tissue Engineering Architecture of Poly(3-Hydroxybutyrate) Scaffold Affects Cell-Material Interactions?, Journal of Biomedical Materials Research - Part A (2012)
47. Enhancing the Biological Characteristics of Aminolysis Surface-Modified 3D Printed Nanocomposite Polycaprolactone/Nanohydroxyapatite Scaffold Via Gelatin Biomacromolecule Immobilization: An in Vitro and in Vivo Study, Colloids and Surfaces B: Biointerfaces (2025)
48. Effects of Ultrasonic Vibration on 3D Printing of Polylactic Acid/Akermanite Nanocomposite Scaffolds, Heliyon (2024)
49. Recent Advances in Additive Manufacturing of Patient-Specific Devices for Dental and Maxillofacial Rehabilitation, Dental Materials (2024)
50. Evaluation of the Mechanical Characteristics of Plga and Plga/Fibrin Scaffolds in Providing an Appropriate Environment for Viability and Growth of Human Adipose-Derived Stem Cells, Eurasian Journal of Analytical Chemistry (2018)