Isfahan University of Medical Sciences

Science Communicator Platform

Stay connected! Follow us on X network (Twitter):
Faculty Members have conducted research related to the Phase Formation, Microstructure and Setting Time of Mcm-48 Mesoporous Silica Nanocomposites With Hydroxyapatite for Dental Applications: Effect of the Ca/P Ratio
Ali Poursamar
Ali Poursamar

Assistant Professor of Biomedical Engineering

Department of Biomaterials, Nanotechnology and Tissue Engineering, School of Advanced Medical Technology

Isfahan University of Medical Sciences

All Documents
1. 3D Printed Magnetoactive Nanocomposite Scaffolds for Bone Regeneration, Biomedical Materials (Bristol) (2025)
2. Enhancing the Biological Characteristics of Aminolysis Surface-Modified 3D Printed Nanocomposite Polycaprolactone/Nanohydroxyapatite Scaffold Via Gelatin Biomacromolecule Immobilization: An in Vitro and in Vivo Study, Colloids and Surfaces B: Biointerfaces (2025)
3. 3D Printed Polycaprolactone/Gelatin/Ordered Mesoporous Calcium Magnesium Silicate Nanocomposite Scaffold for Bone Tissue Regeneration, Journal of Materials Science: Materials in Medicine (2024)
4. A Comprehensive Bench-To-Bed Look Into the Application of Gamma-Sterilized 3D-Printed Polycaprolactone/Hydroxyapatite Implants for Craniomaxillofacial Defects, an in Vitro, in Vivo, and Clinical Study, Biomaterials Advances (2024)
5. A Hybrid 3D-Printed and Electrospun Bilayer Pharmaceutical Membrane Based on Polycaprolactone/Chitosan/Polyvinyl Alcohol for Wound Healing Applications, International Journal of Biological Macromolecules (2024)
6. A Modular Approach to 3D-Printed Bilayer Composite Scaffolds for Osteochondral Tissue Engineering, Journal of Materials Science: Materials in Medicine (2024)
7. A Route Toward Fabrication of 3D Printed Bone Scaffolds Based on Poly(Vinyl Alcohol)–Chitosan/Bioactive Glass by Sol–Gel Chemistry, International Journal of Biological Macromolecules (2024)
8. Amorphous Magnesium Phosphate-Graphene Oxide Nano Particles Laden 3D-Printed Chitosan Scaffolds With Enhanced Osteogenic Potential and Antibacterial Properties, Biomaterials Advances (2024)
9. An in Vitro and in Vivo Study of Electrospun Polyvinyl Alcohol/Chitosan/Sildenafil Citrate Mat on 3D-Printed Polycaprolactone Membrane As a Double Layer Wound Dressing, International Journal of Biological Macromolecules (2024)
10. An in Vitro and in Vivo Study of Electrospun Polyvinyl Alcohol/Chitosan/Sildenafil Citrate Mat on 3D-Printed Polycaprolactone Membrane As a Double Layer Wound Dressing, International Journal of Biological Macromolecules (2024)
11. Chitosan/Mwcnts Nanocomposite Coating on 3D Printed Scaffold of Poly 3-Hydroxybutyrate/Magnetic Mesoporous Bioactive Glass: A New Approach for Bone Regeneration, International Journal of Biological Macromolecules (2024)
12. Evaluation of the Morphological Effects of Hydroxyapatite Nanoparticles on the Rheological Properties and Printability of Hydroxyapatite/Polycaprolactone Nanocomposite Inks and Final Scaffold Features, 3D Printing and Additive Manufacturing (2024)
13. Extracellular Matrix Coated Three-Dimensional-Printed Polycaprolactone Scaffolds Containing Curcumin for Cartilage Tissue Engineering Applications, Journal of Bioactive and Compatible Polymers (2024)
14. Fabrication and Characterization of 3D-Printed Antibacterial Bioactive Glass /Polycaprolactone Nanocomposite Scaffolds, Journal of Polymers and the Environment (2024)
15. Fabrication and Characterization of 3D-Printed Composite Scaffolds of Coral-Derived Hydroxyapatite Nanoparticles/Polycaprolactone/Gelatin Carrying Doxorubicin for Bone Tissue Engineering, Journal of Materials Science: Materials in Medicine (2024)
16. Mechanical, Physical, and Biological Properties of Polycaprolactone/ Mg-Doped Srfe12o19 Nanocomposite Scaffolds for Bone Tissue Engineering Applications, Ceramics International (2024)
17. Microfluidic System Consisting of a Magnetic 3D-Printed Microchannel Filter for Isolation and Enrichment of Circulating Tumor Cells Targeted by Anti-Her2/Mof@Ferrite Core-Shell Nanostructures: A Theranostic Ctc Dialysis System, Analytical Chemistry (2024)
18. Microfluidic System Consisting of a Magnetic 3D-Printed Microchannel Filter for Isolation and Enrichment of Circulating Tumor Cells Targeted by Anti-Her2/Mof@Ferrite Core-Shell Nanostructures: A Theranostic Ctc Dialysis System, Analytical Chemistry (2024)
19. Novel Electrospun Polyvinyl Alcohol/Chitosan/Polycaprolactone-Diltiazem Hydrochloride Nanocomposite Membranes for Wound Dressing Applications, Emergent Materials (2024)
20. Sol-Gel Derived Mesoporous 45S5 Bioactive Glass Containing Mg and Zr Ions: Synthesis, Characterization, and in Vitro Biological Investigation, Arabian Journal of Chemistry (2024)
21. Synergetic Effect of Bioglass and Nano Montmorillonite on 3D Printed Nanocomposite of Polycaprolactone/Gelatin in the Fabrication of Bone Scaffolds, International Journal of Biological Macromolecules (2024)
22. 3D-Printed Bioactive Chitosan/Alginate /Hardystonite Scaffold for Bone Tissue Engineering: Synthesis and Characterization, Journal of Non-Crystalline Solids (2023)
23. 3D-Printed Bioactive Chitosan/Alginate /Hardystonite Scaffold for Bone Tissue Engineering: Synthesis and Characterization, Journal of Non-Crystalline Solids (2023)
24. Evaluation of the Effects of Alumina Nanowire on 3D Printed Polycaprolactone / Magnetic Mesoporous Bioactive Glass Scaffold for Bone Tissue Engineering Applications, Materials Chemistry and Physics (2023)
25. Fabrication of Meso/Macroporous Tio2/Pcl Composite Scaffolds by Direct Ink Writing: The Effects of Porogen Content on the Compressive Modulus and in Vitro Behavior, Materials Today Communications (2023)
26. A Review on Antibacterial Biomaterials in Biomedical Applications: From Materials Perspective to Bioinks Design, Polymers (2022)
27. An in Vitro and in Vivo Study of Pcl/Chitosan Electrospun Mat on Polyurethane/Propolis Foam As a Bilayer Wound Dressing, Biomaterials Advances (2022)
28. Antibacterial Amorphous Magnesium Phosphate/Graphene Oxide for Accelerating Bone Regeneration, Biomaterials Advances (2022)
29. Bioprinted Membranes for Corneal Tissue Engineering: A Review, Pharmaceutics (2022)
30. Bioprinted Membranes for Corneal Tissue Engineering: A Review, Pharmaceutics (2022)
31. Water-Based Chitosan/Reduced Graphene Oxide Ink for Extrusion Printing of a Disposable Amperometric Glucose Sensor, FlatChem (2022)
32. Recent Trends in Three-Dimensional Bioinks Based on Alginate for Biomedical Applications, Materials (2020)
33. Three-Dimensional Printing Constructs Based on the Chitosan for Tissue Regeneration: State of the Art, Developing Directions and Prospect Trends, Materials (2020)
34. Uniaxially Aligned Microwire Networks for Flexible Transparent Electrodes Using a Novel Electrospinning Set-Up, Solar Energy (2019)
35. The Effects of Crosslinkers on Physical, Mechanical, and Cytotoxic Properties of Gelatin Sponge Prepared Via In-Situ Gas Foaming Method As a Tissue Engineering Scaffold, Materials Science and Engineering C (2016)
36. Coated Urinary Catheter by Peg/Pva/Gentamicin With Drug Delivery Capability Against Hospital Infection, Iranian Polymer Journal (English Edition) (2013)
37. Effect of Freezing and Thawing Process on Betamethasone Acetate Release From Polyvinyl Alcohol Nanospheres, Solid State Phenomena (2009)